Ergonomic evaluation of interaction techniques and 3D menus for the practical design of 3D stereoscopic displays

Seongwook Jeong, Eui Seung Jung, Youngjae Im

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

There has been a recent commercialization of 3D stereoscopic displays in order to implement them in a virtual reality environment. However, there is a lack of extensive research into user interfaces for 3D applications on stereoscopic display. This study focused on three representative interaction techniques (ray-casting, keypad and hand-motion techniques) utilizing a head-mounted display and 3D CAVE. In addition, the compatibility with 3D menus was also investigated based on performance and subjective assessment. Nine 3D menus were designed for the experiment in regards to three 2D metaphors (pop-up, pull-down and stack menus) and three structural layouts (list, cubic and circular menus). The most suitable technique for the 3D user interface on a stereoscopic display was the ray-casting technique and the stack menu which provided the user with good performance and subjective response. In addition, it was found that the cubic menu was not as effective as other menus when used with the three interaction techniques. Relevance to industry: This research describes a distinctive evaluation method and recommendations that guarantee the suitability for interactive 3D environments. Therefore, the results will encourage practitioners and researchers that are new to the area of 3D interface design.

Original languageEnglish
Pages (from-to)205-218
Number of pages14
JournalInternational Journal of Industrial Ergonomics
Volume53
DOIs
Publication statusPublished - 2016 May 1

Fingerprint

Human Engineering
Ergonomics
user interface
ergonomics
Display devices
industry research
Metaphor
commercialization
interaction
evaluation
virtual reality
Research
layout
User interfaces
performance
guarantee
metaphor
Industry
Casting
Hand

Keywords

  • 3D menu
  • Interaction technique
  • Stereoscopic display

ASJC Scopus subject areas

  • Human Factors and Ergonomics
  • Public Health, Environmental and Occupational Health

Cite this

Ergonomic evaluation of interaction techniques and 3D menus for the practical design of 3D stereoscopic displays. / Jeong, Seongwook; Jung, Eui Seung; Im, Youngjae.

In: International Journal of Industrial Ergonomics, Vol. 53, 01.05.2016, p. 205-218.

Research output: Contribution to journalArticle

@article{4c8b736b63774902bec1180b58f9b790,
title = "Ergonomic evaluation of interaction techniques and 3D menus for the practical design of 3D stereoscopic displays",
abstract = "There has been a recent commercialization of 3D stereoscopic displays in order to implement them in a virtual reality environment. However, there is a lack of extensive research into user interfaces for 3D applications on stereoscopic display. This study focused on three representative interaction techniques (ray-casting, keypad and hand-motion techniques) utilizing a head-mounted display and 3D CAVE. In addition, the compatibility with 3D menus was also investigated based on performance and subjective assessment. Nine 3D menus were designed for the experiment in regards to three 2D metaphors (pop-up, pull-down and stack menus) and three structural layouts (list, cubic and circular menus). The most suitable technique for the 3D user interface on a stereoscopic display was the ray-casting technique and the stack menu which provided the user with good performance and subjective response. In addition, it was found that the cubic menu was not as effective as other menus when used with the three interaction techniques. Relevance to industry: This research describes a distinctive evaluation method and recommendations that guarantee the suitability for interactive 3D environments. Therefore, the results will encourage practitioners and researchers that are new to the area of 3D interface design.",
keywords = "3D menu, Interaction technique, Stereoscopic display",
author = "Seongwook Jeong and Jung, {Eui Seung} and Youngjae Im",
year = "2016",
month = "5",
day = "1",
doi = "10.1016/j.ergon.2016.01.001",
language = "English",
volume = "53",
pages = "205--218",
journal = "International Journal of Industrial Ergonomics",
issn = "0169-8141",
publisher = "Elsevier",

}

TY - JOUR

T1 - Ergonomic evaluation of interaction techniques and 3D menus for the practical design of 3D stereoscopic displays

AU - Jeong, Seongwook

AU - Jung, Eui Seung

AU - Im, Youngjae

PY - 2016/5/1

Y1 - 2016/5/1

N2 - There has been a recent commercialization of 3D stereoscopic displays in order to implement them in a virtual reality environment. However, there is a lack of extensive research into user interfaces for 3D applications on stereoscopic display. This study focused on three representative interaction techniques (ray-casting, keypad and hand-motion techniques) utilizing a head-mounted display and 3D CAVE. In addition, the compatibility with 3D menus was also investigated based on performance and subjective assessment. Nine 3D menus were designed for the experiment in regards to three 2D metaphors (pop-up, pull-down and stack menus) and three structural layouts (list, cubic and circular menus). The most suitable technique for the 3D user interface on a stereoscopic display was the ray-casting technique and the stack menu which provided the user with good performance and subjective response. In addition, it was found that the cubic menu was not as effective as other menus when used with the three interaction techniques. Relevance to industry: This research describes a distinctive evaluation method and recommendations that guarantee the suitability for interactive 3D environments. Therefore, the results will encourage practitioners and researchers that are new to the area of 3D interface design.

AB - There has been a recent commercialization of 3D stereoscopic displays in order to implement them in a virtual reality environment. However, there is a lack of extensive research into user interfaces for 3D applications on stereoscopic display. This study focused on three representative interaction techniques (ray-casting, keypad and hand-motion techniques) utilizing a head-mounted display and 3D CAVE. In addition, the compatibility with 3D menus was also investigated based on performance and subjective assessment. Nine 3D menus were designed for the experiment in regards to three 2D metaphors (pop-up, pull-down and stack menus) and three structural layouts (list, cubic and circular menus). The most suitable technique for the 3D user interface on a stereoscopic display was the ray-casting technique and the stack menu which provided the user with good performance and subjective response. In addition, it was found that the cubic menu was not as effective as other menus when used with the three interaction techniques. Relevance to industry: This research describes a distinctive evaluation method and recommendations that guarantee the suitability for interactive 3D environments. Therefore, the results will encourage practitioners and researchers that are new to the area of 3D interface design.

KW - 3D menu

KW - Interaction technique

KW - Stereoscopic display

UR - http://www.scopus.com/inward/record.url?scp=84957592081&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84957592081&partnerID=8YFLogxK

U2 - 10.1016/j.ergon.2016.01.001

DO - 10.1016/j.ergon.2016.01.001

M3 - Article

VL - 53

SP - 205

EP - 218

JO - International Journal of Industrial Ergonomics

JF - International Journal of Industrial Ergonomics

SN - 0169-8141

ER -