Erosion characteristics of silicon nitride ceramics

Hyeon Ju Choi, Dong Ho Han, Dong Soo Park, Hai Doo Kim, Byung Dong Han, Dae-Soon Lim, Il Soo Kim

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Silicon nitride ceramics with three different microstructures were prepared using three different silicon nitride powders and β-silicon nitride whiskers in order to study their erosion characteristics. Samples with a coarse microstructure were prepared by using a commercially available silicon nitride powder seeded with the whiskers. Samples with fine microstructures were obtained using fine silicon nitride powders that had been milled in toluene or in distilled water. The powder milled in toluene gained both carbon and oxygen during milling. Heating the powder at 1673 K for 10 h in a flowing nitrogen atmosphere reduced carbon and oxygen contents to the level of as-received powder. The powder milled in distilled water gained a significant amount of oxygen during milling, and silicon oxynitride (Si2N2O) was detected by X-ray diffraction analysis (XRD) from the sample sintered with it. The sample sintered with the powder milled in distilled water showed the finest microstructure and the lowest erosion rate among the samples. Erosion occurred mainly by dislodgment of grains.

Original languageEnglish
Pages (from-to)713-719
Number of pages7
JournalCeramics International
Volume29
Issue number6
DOIs
Publication statusPublished - 2003 Jul 15

Fingerprint

Silicon nitride
Powders
Erosion
Microstructure
Toluene
Oxygen
Water
Carbon
silicon nitride
Silicon
X ray diffraction analysis
Nitrogen
Heating

Keywords

  • B. Grain size
  • B. Microstructure
  • D. Silicon nitride
  • Erosion
  • Silicon oxynitride

ASJC Scopus subject areas

  • Ceramics and Composites

Cite this

Choi, H. J., Han, D. H., Park, D. S., Kim, H. D., Han, B. D., Lim, D-S., & Kim, I. S. (2003). Erosion characteristics of silicon nitride ceramics. Ceramics International, 29(6), 713-719. https://doi.org/10.1016/S0272-8842(02)00222-5

Erosion characteristics of silicon nitride ceramics. / Choi, Hyeon Ju; Han, Dong Ho; Park, Dong Soo; Kim, Hai Doo; Han, Byung Dong; Lim, Dae-Soon; Kim, Il Soo.

In: Ceramics International, Vol. 29, No. 6, 15.07.2003, p. 713-719.

Research output: Contribution to journalArticle

Choi, HJ, Han, DH, Park, DS, Kim, HD, Han, BD, Lim, D-S & Kim, IS 2003, 'Erosion characteristics of silicon nitride ceramics', Ceramics International, vol. 29, no. 6, pp. 713-719. https://doi.org/10.1016/S0272-8842(02)00222-5
Choi, Hyeon Ju ; Han, Dong Ho ; Park, Dong Soo ; Kim, Hai Doo ; Han, Byung Dong ; Lim, Dae-Soon ; Kim, Il Soo. / Erosion characteristics of silicon nitride ceramics. In: Ceramics International. 2003 ; Vol. 29, No. 6. pp. 713-719.
@article{53703010971a491fae9d8ea0cfb193de,
title = "Erosion characteristics of silicon nitride ceramics",
abstract = "Silicon nitride ceramics with three different microstructures were prepared using three different silicon nitride powders and β-silicon nitride whiskers in order to study their erosion characteristics. Samples with a coarse microstructure were prepared by using a commercially available silicon nitride powder seeded with the whiskers. Samples with fine microstructures were obtained using fine silicon nitride powders that had been milled in toluene or in distilled water. The powder milled in toluene gained both carbon and oxygen during milling. Heating the powder at 1673 K for 10 h in a flowing nitrogen atmosphere reduced carbon and oxygen contents to the level of as-received powder. The powder milled in distilled water gained a significant amount of oxygen during milling, and silicon oxynitride (Si2N2O) was detected by X-ray diffraction analysis (XRD) from the sample sintered with it. The sample sintered with the powder milled in distilled water showed the finest microstructure and the lowest erosion rate among the samples. Erosion occurred mainly by dislodgment of grains.",
keywords = "B. Grain size, B. Microstructure, D. Silicon nitride, Erosion, Silicon oxynitride",
author = "Choi, {Hyeon Ju} and Han, {Dong Ho} and Park, {Dong Soo} and Kim, {Hai Doo} and Han, {Byung Dong} and Dae-Soon Lim and Kim, {Il Soo}",
year = "2003",
month = "7",
day = "15",
doi = "10.1016/S0272-8842(02)00222-5",
language = "English",
volume = "29",
pages = "713--719",
journal = "Ceramics International",
issn = "0272-8842",
publisher = "Elsevier Limited",
number = "6",

}

TY - JOUR

T1 - Erosion characteristics of silicon nitride ceramics

AU - Choi, Hyeon Ju

AU - Han, Dong Ho

AU - Park, Dong Soo

AU - Kim, Hai Doo

AU - Han, Byung Dong

AU - Lim, Dae-Soon

AU - Kim, Il Soo

PY - 2003/7/15

Y1 - 2003/7/15

N2 - Silicon nitride ceramics with three different microstructures were prepared using three different silicon nitride powders and β-silicon nitride whiskers in order to study their erosion characteristics. Samples with a coarse microstructure were prepared by using a commercially available silicon nitride powder seeded with the whiskers. Samples with fine microstructures were obtained using fine silicon nitride powders that had been milled in toluene or in distilled water. The powder milled in toluene gained both carbon and oxygen during milling. Heating the powder at 1673 K for 10 h in a flowing nitrogen atmosphere reduced carbon and oxygen contents to the level of as-received powder. The powder milled in distilled water gained a significant amount of oxygen during milling, and silicon oxynitride (Si2N2O) was detected by X-ray diffraction analysis (XRD) from the sample sintered with it. The sample sintered with the powder milled in distilled water showed the finest microstructure and the lowest erosion rate among the samples. Erosion occurred mainly by dislodgment of grains.

AB - Silicon nitride ceramics with three different microstructures were prepared using three different silicon nitride powders and β-silicon nitride whiskers in order to study their erosion characteristics. Samples with a coarse microstructure were prepared by using a commercially available silicon nitride powder seeded with the whiskers. Samples with fine microstructures were obtained using fine silicon nitride powders that had been milled in toluene or in distilled water. The powder milled in toluene gained both carbon and oxygen during milling. Heating the powder at 1673 K for 10 h in a flowing nitrogen atmosphere reduced carbon and oxygen contents to the level of as-received powder. The powder milled in distilled water gained a significant amount of oxygen during milling, and silicon oxynitride (Si2N2O) was detected by X-ray diffraction analysis (XRD) from the sample sintered with it. The sample sintered with the powder milled in distilled water showed the finest microstructure and the lowest erosion rate among the samples. Erosion occurred mainly by dislodgment of grains.

KW - B. Grain size

KW - B. Microstructure

KW - D. Silicon nitride

KW - Erosion

KW - Silicon oxynitride

UR - http://www.scopus.com/inward/record.url?scp=0037774773&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0037774773&partnerID=8YFLogxK

U2 - 10.1016/S0272-8842(02)00222-5

DO - 10.1016/S0272-8842(02)00222-5

M3 - Article

AN - SCOPUS:0037774773

VL - 29

SP - 713

EP - 719

JO - Ceramics International

JF - Ceramics International

SN - 0272-8842

IS - 6

ER -