Evaluation of organic matter fouling potential by membrane fouling index

C. Park, H. Kim, S. Hong, S. Lee, S. I. Choi

Research output: Contribution to journalArticlepeer-review

12 Citations (Scopus)

Abstract

The membrane fouling index, widely used in the reverse osmosis (RO) membrane industry, is developed mainly to assess the fouling potential of particulate matter. However, the fouling potential by organic matter should also be accurately evaluated as the productivity loss by organic fouling is often more severe than particle fouling, despite its low concentration in feed water. This study was performed to investigate the influence of organic characteristics and feed water solution chemistry on the membrane fouling index, such as the silt density index (SDI). The results showed that the feed solution chemistry (i.e. pH, ionic strength and hardness) affected the SDI values of organic rich feed water to some degree. In addition, Aldrich humic acid (AHA) exhibited higher fouling potential by SDI than Suwannee river humic acid (SRHA), emphasising the importance of organic properties. Lastly, it is shown that although SDI values measured were the same, the degree of NOM fouling was significantly different for the membranes with different surface properties.

Original languageEnglish
Pages (from-to)27-33
Number of pages7
JournalWater Science and Technology: Water Supply
Volume7
Issue number5-6
DOIs
Publication statusPublished - 2007

Keywords

  • Electrostatic repulsion
  • Membrane fouling index
  • Natural organic matter
  • Organic fouling potential

ASJC Scopus subject areas

  • Water Science and Technology

Fingerprint Dive into the research topics of 'Evaluation of organic matter fouling potential by membrane fouling index'. Together they form a unique fingerprint.

Cite this