Evolution of annealing textures and microstructures in AA 3103 after cold rolling and repeated shear deformation

Moo Young Huh, J. P. Lee, Jae-chul Lee, J. W. Park, Y. H. Chung

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The evolution of annealing textures and microstructures in the aluminum alloy 3103, which was subjected to deformation by either cold rolling or equal channel angular rolling (ECAR), was investigated. Samples of AA 3103 sheets were repeatedly deformed by ECAR up to six passes. In addition, AA 3103 was cold rolled to the same hardness level of the ECARed samples. Upon annealing, the cold rolled sample was recrystallized by the discontinuous recrystallization which gave rise to the formation of the cube texture and large grains bigger than 30 μm. In contrast, the ECARed sample was recrystallized by extended recovery which led to the formation of ultra-fine grains having a size smaller than 3.5 μm.

Original languageEnglish
Pages (from-to)389-392
Number of pages4
JournalMaterials Science Forum
Volume475-479
Issue numberI
Publication statusPublished - 2005 Apr 26

Fingerprint

cold rolling
Cold rolling
Shear deformation
textures
Textures
Annealing
shear
microstructure
Microstructure
annealing
Aluminum alloys
Hardness
Recovery
aluminum alloys
hardness
recovery

Keywords

  • Equal channel angular rolling (ECAR)
  • Recrystallization
  • Texture
  • Ultra-fine grains

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Evolution of annealing textures and microstructures in AA 3103 after cold rolling and repeated shear deformation. / Huh, Moo Young; Lee, J. P.; Lee, Jae-chul; Park, J. W.; Chung, Y. H.

In: Materials Science Forum, Vol. 475-479, No. I, 26.04.2005, p. 389-392.

Research output: Contribution to journalArticle

@article{29f3e6c7b5d74cdab345f478697db66c,
title = "Evolution of annealing textures and microstructures in AA 3103 after cold rolling and repeated shear deformation",
abstract = "The evolution of annealing textures and microstructures in the aluminum alloy 3103, which was subjected to deformation by either cold rolling or equal channel angular rolling (ECAR), was investigated. Samples of AA 3103 sheets were repeatedly deformed by ECAR up to six passes. In addition, AA 3103 was cold rolled to the same hardness level of the ECARed samples. Upon annealing, the cold rolled sample was recrystallized by the discontinuous recrystallization which gave rise to the formation of the cube texture and large grains bigger than 30 μm. In contrast, the ECARed sample was recrystallized by extended recovery which led to the formation of ultra-fine grains having a size smaller than 3.5 μm.",
keywords = "Equal channel angular rolling (ECAR), Recrystallization, Texture, Ultra-fine grains",
author = "Huh, {Moo Young} and Lee, {J. P.} and Jae-chul Lee and Park, {J. W.} and Chung, {Y. H.}",
year = "2005",
month = "4",
day = "26",
language = "English",
volume = "475-479",
pages = "389--392",
journal = "Materials Science Forum",
issn = "0255-5476",
publisher = "Trans Tech Publications",
number = "I",

}

TY - JOUR

T1 - Evolution of annealing textures and microstructures in AA 3103 after cold rolling and repeated shear deformation

AU - Huh, Moo Young

AU - Lee, J. P.

AU - Lee, Jae-chul

AU - Park, J. W.

AU - Chung, Y. H.

PY - 2005/4/26

Y1 - 2005/4/26

N2 - The evolution of annealing textures and microstructures in the aluminum alloy 3103, which was subjected to deformation by either cold rolling or equal channel angular rolling (ECAR), was investigated. Samples of AA 3103 sheets were repeatedly deformed by ECAR up to six passes. In addition, AA 3103 was cold rolled to the same hardness level of the ECARed samples. Upon annealing, the cold rolled sample was recrystallized by the discontinuous recrystallization which gave rise to the formation of the cube texture and large grains bigger than 30 μm. In contrast, the ECARed sample was recrystallized by extended recovery which led to the formation of ultra-fine grains having a size smaller than 3.5 μm.

AB - The evolution of annealing textures and microstructures in the aluminum alloy 3103, which was subjected to deformation by either cold rolling or equal channel angular rolling (ECAR), was investigated. Samples of AA 3103 sheets were repeatedly deformed by ECAR up to six passes. In addition, AA 3103 was cold rolled to the same hardness level of the ECARed samples. Upon annealing, the cold rolled sample was recrystallized by the discontinuous recrystallization which gave rise to the formation of the cube texture and large grains bigger than 30 μm. In contrast, the ECARed sample was recrystallized by extended recovery which led to the formation of ultra-fine grains having a size smaller than 3.5 μm.

KW - Equal channel angular rolling (ECAR)

KW - Recrystallization

KW - Texture

KW - Ultra-fine grains

UR - http://www.scopus.com/inward/record.url?scp=17144382474&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=17144382474&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:17144382474

VL - 475-479

SP - 389

EP - 392

JO - Materials Science Forum

JF - Materials Science Forum

SN - 0255-5476

IS - I

ER -