Experimental verification of 220V incandescent lamp characteristics for the IEC flickermeter

S. H. Cho, J. A. Jung, Gilsoo Jang, Sae-Hyuk Kwon, M. H. Kang

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

In IEC(International Electrotechnical Commission) flicker standards, only two representative cases for 120V and 230V are considered. To expend its applicability to other practical cases, it is necessary to manipulate the measuring algorithm, especially a weighting filter, which can be mathematically derived by changing the frequency characteristics of lamp. This paper presents the experimental procedure to obtain the lamp characteristics of 220V incandescent bulbs, also known as lamp gain factor, which has never been dealt in the international standards. And the determined parameters of 220V lamps are compared with those of other types of lamps.

Original languageEnglish
Title of host publicationICHQP 2008: 13th International Conference on Harmonics and Quality of Power
DOIs
Publication statusPublished - 2008 Dec 23
EventICHQP 2008: 13th International Conference on Harmonics and Quality of Power - Wollongong, NSW, Australia
Duration: 2008 Sep 282008 Oct 1

Other

OtherICHQP 2008: 13th International Conference on Harmonics and Quality of Power
CountryAustralia
CityWollongong, NSW
Period08/9/2808/10/1

    Fingerprint

Keywords

  • 220V incandescent bulb
  • Gain factor
  • IEC flickermeter
  • Lamp curve
  • Time constant

ASJC Scopus subject areas

  • Signal Processing
  • Energy Engineering and Power Technology
  • Communication

Cite this

Cho, S. H., Jung, J. A., Jang, G., Kwon, S-H., & Kang, M. H. (2008). Experimental verification of 220V incandescent lamp characteristics for the IEC flickermeter. In ICHQP 2008: 13th International Conference on Harmonics and Quality of Power [4668797] https://doi.org/10.1109/ICHQP.2008.4668797