Extrinsic Calibration of Multiple 3D LiDAR Sensors by the Use of Planar Objects

Hyunsuk Lee, Woojin Chung

Research output: Contribution to journalArticlepeer-review

Abstract

Three-dimensional light detection and ranging (LiDAR) sensors have received much attention in the field of autonomous navigation owing to their accurate, robust, and rich geometric information. Autonomous vehicles are typically equipped with multiple 3D LiDARs because there are many commercially available low-cost 3D LiDARs. Extrinsic calibration of multiple LiDAR sensors is essential in order to obtain consistent geometric information. This paper presents a systematic procedure for the extrinsic calibration of multiple 3D LiDAR sensors using plane objects. At least three independent planes are required within the common field of view of the LiDAR sensors. The planes satisfying the condition can easily be found on objects such as the ground, walls, or columns in indoor and outdoor environments. Therefore, the proposed method does not require environmental modifications such as using artificial calibration objects. Multiple LiDARs typically have different viewpoints to reduce blind spots. This situation increases the difficulty of the extrinsic calibration using conventional registration algorithms. We suggest a plane registration method for cases in which correspondences are not known. The entire calibration process can easily be automated using the proposed registration technique. The presented experimental results clearly show that the proposed method generates more accurate extrinsic parameters than conventional point cloud registration methods.

Original languageEnglish
Article number7234
JournalSensors
Volume22
Issue number19
DOIs
Publication statusPublished - 2022 Oct

Keywords

  • extrinsic calibration
  • multiple LiDAR sensors
  • non-linear optimization
  • plane-based registration

ASJC Scopus subject areas

  • Analytical Chemistry
  • Information Systems
  • Biochemistry
  • Atomic and Molecular Physics, and Optics
  • Instrumentation
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Extrinsic Calibration of Multiple 3D LiDAR Sensors by the Use of Planar Objects'. Together they form a unique fingerprint.

Cite this