Facile Nanocasting of Dielectric Metasurfaces with Sub-100 nm Resolution

Kwan Kim, Gwanho Yoon, Seungho Baek, Junsuk Rho, Heon Lee

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

This work presents a facile nanocasting technique to fabricate dielectric metasurfaces at low cost and high throughput. A flexible polymer mold is replicated from a master mold, and then the polymer mold is used to shape particle-embedded UV-curable polymer resin. The polymer mold is compatible with flexible and curved substrates. A hard-polydimethylsiloxane improves mechanical stability of the polymer mold providing sub-100 nm patterning resolution. The patterned resin itself can work as a metasurface without secondary operations because dielectric particles sufficiently increase the refractive index of the resin. The absence of the secondary operations allows our method to have higher productivity and cost competitiveness than those of typical nanoimprint lithography. Experimental demonstration verifies the feasibility of our method, and the replicated metasurface exhibits a conversion efficiency of 46% in the visible, which is comparable to metasurfaces based on low-loss dielectrics. Given that conventional dielectric metasurfaces have been fabricated by electron beam lithography at formidable cost due to low throughput, our method will be a promising nanofabrication platform and thereby facilitate commercialization of dielectric metasurfaces.

Original languageEnglish
Pages (from-to)26109-26115
Number of pages7
JournalACS Applied Materials and Interfaces
Volume11
Issue number29
DOIs
Publication statusPublished - 2019 Jul 24

Fingerprint

Polymers
Resins
Throughput
Nanoimprint lithography
Costs
Electron beam lithography
Mechanical stability
Polydimethylsiloxane
Dielectric losses
Nanotechnology
Conversion efficiency
Refractive index
Demonstrations
Productivity
Substrates

Keywords

  • hard-polydimethylsiloxane
  • low cost
  • nanofabrication
  • nanoimprint lithography
  • UV curing

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Facile Nanocasting of Dielectric Metasurfaces with Sub-100 nm Resolution. / Kim, Kwan; Yoon, Gwanho; Baek, Seungho; Rho, Junsuk; Lee, Heon.

In: ACS Applied Materials and Interfaces, Vol. 11, No. 29, 24.07.2019, p. 26109-26115.

Research output: Contribution to journalArticle

Kim, Kwan ; Yoon, Gwanho ; Baek, Seungho ; Rho, Junsuk ; Lee, Heon. / Facile Nanocasting of Dielectric Metasurfaces with Sub-100 nm Resolution. In: ACS Applied Materials and Interfaces. 2019 ; Vol. 11, No. 29. pp. 26109-26115.
@article{bf59c4d5f302410b9c3f4adca5e98c9d,
title = "Facile Nanocasting of Dielectric Metasurfaces with Sub-100 nm Resolution",
abstract = "This work presents a facile nanocasting technique to fabricate dielectric metasurfaces at low cost and high throughput. A flexible polymer mold is replicated from a master mold, and then the polymer mold is used to shape particle-embedded UV-curable polymer resin. The polymer mold is compatible with flexible and curved substrates. A hard-polydimethylsiloxane improves mechanical stability of the polymer mold providing sub-100 nm patterning resolution. The patterned resin itself can work as a metasurface without secondary operations because dielectric particles sufficiently increase the refractive index of the resin. The absence of the secondary operations allows our method to have higher productivity and cost competitiveness than those of typical nanoimprint lithography. Experimental demonstration verifies the feasibility of our method, and the replicated metasurface exhibits a conversion efficiency of 46{\%} in the visible, which is comparable to metasurfaces based on low-loss dielectrics. Given that conventional dielectric metasurfaces have been fabricated by electron beam lithography at formidable cost due to low throughput, our method will be a promising nanofabrication platform and thereby facilitate commercialization of dielectric metasurfaces.",
keywords = "hard-polydimethylsiloxane, low cost, nanofabrication, nanoimprint lithography, UV curing",
author = "Kwan Kim and Gwanho Yoon and Seungho Baek and Junsuk Rho and Heon Lee",
year = "2019",
month = "7",
day = "24",
doi = "10.1021/acsami.9b07774",
language = "English",
volume = "11",
pages = "26109--26115",
journal = "ACS applied materials & interfaces",
issn = "1944-8244",
publisher = "American Chemical Society",
number = "29",

}

TY - JOUR

T1 - Facile Nanocasting of Dielectric Metasurfaces with Sub-100 nm Resolution

AU - Kim, Kwan

AU - Yoon, Gwanho

AU - Baek, Seungho

AU - Rho, Junsuk

AU - Lee, Heon

PY - 2019/7/24

Y1 - 2019/7/24

N2 - This work presents a facile nanocasting technique to fabricate dielectric metasurfaces at low cost and high throughput. A flexible polymer mold is replicated from a master mold, and then the polymer mold is used to shape particle-embedded UV-curable polymer resin. The polymer mold is compatible with flexible and curved substrates. A hard-polydimethylsiloxane improves mechanical stability of the polymer mold providing sub-100 nm patterning resolution. The patterned resin itself can work as a metasurface without secondary operations because dielectric particles sufficiently increase the refractive index of the resin. The absence of the secondary operations allows our method to have higher productivity and cost competitiveness than those of typical nanoimprint lithography. Experimental demonstration verifies the feasibility of our method, and the replicated metasurface exhibits a conversion efficiency of 46% in the visible, which is comparable to metasurfaces based on low-loss dielectrics. Given that conventional dielectric metasurfaces have been fabricated by electron beam lithography at formidable cost due to low throughput, our method will be a promising nanofabrication platform and thereby facilitate commercialization of dielectric metasurfaces.

AB - This work presents a facile nanocasting technique to fabricate dielectric metasurfaces at low cost and high throughput. A flexible polymer mold is replicated from a master mold, and then the polymer mold is used to shape particle-embedded UV-curable polymer resin. The polymer mold is compatible with flexible and curved substrates. A hard-polydimethylsiloxane improves mechanical stability of the polymer mold providing sub-100 nm patterning resolution. The patterned resin itself can work as a metasurface without secondary operations because dielectric particles sufficiently increase the refractive index of the resin. The absence of the secondary operations allows our method to have higher productivity and cost competitiveness than those of typical nanoimprint lithography. Experimental demonstration verifies the feasibility of our method, and the replicated metasurface exhibits a conversion efficiency of 46% in the visible, which is comparable to metasurfaces based on low-loss dielectrics. Given that conventional dielectric metasurfaces have been fabricated by electron beam lithography at formidable cost due to low throughput, our method will be a promising nanofabrication platform and thereby facilitate commercialization of dielectric metasurfaces.

KW - hard-polydimethylsiloxane

KW - low cost

KW - nanofabrication

KW - nanoimprint lithography

KW - UV curing

UR - http://www.scopus.com/inward/record.url?scp=85070485270&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85070485270&partnerID=8YFLogxK

U2 - 10.1021/acsami.9b07774

DO - 10.1021/acsami.9b07774

M3 - Article

C2 - 31262166

AN - SCOPUS:85070485270

VL - 11

SP - 26109

EP - 26115

JO - ACS applied materials & interfaces

JF - ACS applied materials & interfaces

SN - 1944-8244

IS - 29

ER -