Field emission properties of 4.5 inch triode type flat lamp using the screen printing method

Hyeon Jae Lee, Yang Doo Lee, Woo Sung Cho, Seung Il Moon, Jai Kyeong Kim, Byeong Kwon Ju, Yun-Hi Lee, Sahn Nahm, Seong Woo Hwang

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

A triode type flat lamp (4.5-in.) using screen printed carbon nanotube emitters was fabricated. The spacer of about 200um between the cathode and gate electrode with a metal mesh was placed by the simple screen printing technique, which does not correspond with method of the past. The buried CNTs were exposed on the surface by the electric field condition without other mechanical surface treatments. A high brightness of 10100 cd / m 2 with relatively homogenous emission sites was obtained at the voltage of gate and anode of D.C. bias 280 V and 3KV, respectively. The turn-on voltage was 180 V and the anode current of 5 mA was extracted at the gate voltage of 275 V. Through accurate alignment of the gate holes and the CNT dots, the gate leakage current was significantly decreased including emitted electrons focusing effect.

Original languageEnglish
Title of host publicationDigest of Technical Papers - SID International Symposium
Pages422-425
Number of pages4
Volume36
Edition1
Publication statusPublished - 2005
EventSID Symposium Digest of Technical Papers - Boston, MA, United States
Duration: 2004 Jul 292004 Jul 29

Other

OtherSID Symposium Digest of Technical Papers
CountryUnited States
CityBoston, MA
Period04/7/2904/7/29

Fingerprint

Triodes
Screen printing
Electric lamps
Field emission
Anodes
Electric potential
Leakage currents
Surface treatment
Luminance
Carbon nanotubes
Cathodes
Electric fields
Electrodes
Electrons
Metals

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Lee, H. J., Lee, Y. D., Cho, W. S., Moon, S. I., Kim, J. K., Ju, B. K., ... Hwang, S. W. (2005). Field emission properties of 4.5 inch triode type flat lamp using the screen printing method. In Digest of Technical Papers - SID International Symposium (1 ed., Vol. 36, pp. 422-425). [P-40]

Field emission properties of 4.5 inch triode type flat lamp using the screen printing method. / Lee, Hyeon Jae; Lee, Yang Doo; Cho, Woo Sung; Moon, Seung Il; Kim, Jai Kyeong; Ju, Byeong Kwon; Lee, Yun-Hi; Nahm, Sahn; Hwang, Seong Woo.

Digest of Technical Papers - SID International Symposium. Vol. 36 1. ed. 2005. p. 422-425 P-40.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lee, HJ, Lee, YD, Cho, WS, Moon, SI, Kim, JK, Ju, BK, Lee, Y-H, Nahm, S & Hwang, SW 2005, Field emission properties of 4.5 inch triode type flat lamp using the screen printing method. in Digest of Technical Papers - SID International Symposium. 1 edn, vol. 36, P-40, pp. 422-425, SID Symposium Digest of Technical Papers, Boston, MA, United States, 04/7/29.
Lee HJ, Lee YD, Cho WS, Moon SI, Kim JK, Ju BK et al. Field emission properties of 4.5 inch triode type flat lamp using the screen printing method. In Digest of Technical Papers - SID International Symposium. 1 ed. Vol. 36. 2005. p. 422-425. P-40
Lee, Hyeon Jae ; Lee, Yang Doo ; Cho, Woo Sung ; Moon, Seung Il ; Kim, Jai Kyeong ; Ju, Byeong Kwon ; Lee, Yun-Hi ; Nahm, Sahn ; Hwang, Seong Woo. / Field emission properties of 4.5 inch triode type flat lamp using the screen printing method. Digest of Technical Papers - SID International Symposium. Vol. 36 1. ed. 2005. pp. 422-425
@inproceedings{2b497b4b9a54428fa78b1dd5db6fc421,
title = "Field emission properties of 4.5 inch triode type flat lamp using the screen printing method",
abstract = "A triode type flat lamp (4.5-in.) using screen printed carbon nanotube emitters was fabricated. The spacer of about 200um between the cathode and gate electrode with a metal mesh was placed by the simple screen printing technique, which does not correspond with method of the past. The buried CNTs were exposed on the surface by the electric field condition without other mechanical surface treatments. A high brightness of 10100 cd / m 2 with relatively homogenous emission sites was obtained at the voltage of gate and anode of D.C. bias 280 V and 3KV, respectively. The turn-on voltage was 180 V and the anode current of 5 mA was extracted at the gate voltage of 275 V. Through accurate alignment of the gate holes and the CNT dots, the gate leakage current was significantly decreased including emitted electrons focusing effect.",
author = "Lee, {Hyeon Jae} and Lee, {Yang Doo} and Cho, {Woo Sung} and Moon, {Seung Il} and Kim, {Jai Kyeong} and Ju, {Byeong Kwon} and Yun-Hi Lee and Sahn Nahm and Hwang, {Seong Woo}",
year = "2005",
language = "English",
volume = "36",
pages = "422--425",
booktitle = "Digest of Technical Papers - SID International Symposium",
edition = "1",

}

TY - GEN

T1 - Field emission properties of 4.5 inch triode type flat lamp using the screen printing method

AU - Lee, Hyeon Jae

AU - Lee, Yang Doo

AU - Cho, Woo Sung

AU - Moon, Seung Il

AU - Kim, Jai Kyeong

AU - Ju, Byeong Kwon

AU - Lee, Yun-Hi

AU - Nahm, Sahn

AU - Hwang, Seong Woo

PY - 2005

Y1 - 2005

N2 - A triode type flat lamp (4.5-in.) using screen printed carbon nanotube emitters was fabricated. The spacer of about 200um between the cathode and gate electrode with a metal mesh was placed by the simple screen printing technique, which does not correspond with method of the past. The buried CNTs were exposed on the surface by the electric field condition without other mechanical surface treatments. A high brightness of 10100 cd / m 2 with relatively homogenous emission sites was obtained at the voltage of gate and anode of D.C. bias 280 V and 3KV, respectively. The turn-on voltage was 180 V and the anode current of 5 mA was extracted at the gate voltage of 275 V. Through accurate alignment of the gate holes and the CNT dots, the gate leakage current was significantly decreased including emitted electrons focusing effect.

AB - A triode type flat lamp (4.5-in.) using screen printed carbon nanotube emitters was fabricated. The spacer of about 200um between the cathode and gate electrode with a metal mesh was placed by the simple screen printing technique, which does not correspond with method of the past. The buried CNTs were exposed on the surface by the electric field condition without other mechanical surface treatments. A high brightness of 10100 cd / m 2 with relatively homogenous emission sites was obtained at the voltage of gate and anode of D.C. bias 280 V and 3KV, respectively. The turn-on voltage was 180 V and the anode current of 5 mA was extracted at the gate voltage of 275 V. Through accurate alignment of the gate holes and the CNT dots, the gate leakage current was significantly decreased including emitted electrons focusing effect.

UR - http://www.scopus.com/inward/record.url?scp=32144442208&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=32144442208&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:32144442208

VL - 36

SP - 422

EP - 425

BT - Digest of Technical Papers - SID International Symposium

ER -