Filtration performance characteristics of sticky aerosol using calcium hydroxide

Jae Rang Lee, Naim Hasolli, Seong Min Jeon, Kang San Lee, Jun Hyeok Gang, Kwang Deuk Kim, Kwan Young Lee, Young Ok Park

Research output: Contribution to journalArticle

Abstract

This study examined the performance of removing aerosol upon a flow rate variable by agglomerating sticky aerosol with calcium hydroxide and removing cohesive aerosol through an experimental apparatus, simulating an actual painting booth. As a result of examining the performance of the filter by fixing the paint spray quantity, the calcium hydroxide input and the filtration area under variable flow rates of 5, 10, and 15 Nm3/min, we confirmed that the filter performance has long average aerosol removing intervals at the 5 Nm3/min flow rate. At the 5 Nm3/min flow rate, there is a low residual pressure drop trend and high fractional collection efficiency, and a high level of total collection efficiency is maintained at 99.42%. When the flow rate is less than 5 Nm3/min, the aerosol settling and experimentation was impossible. With this research, the optimal conditions for the use of sticky aerosol have been examined.

Original languageEnglish
Article number100
JournalAtmosphere
Volume10
Issue number2
DOIs
Publication statusPublished - 2019 Jan 1

Keywords

  • Calcium hydroxide
  • Filter
  • Flow rate
  • Sticky aerosol
  • Total collection efficiency

ASJC Scopus subject areas

  • Environmental Science (miscellaneous)

Fingerprint Dive into the research topics of 'Filtration performance characteristics of sticky aerosol using calcium hydroxide'. Together they form a unique fingerprint.

  • Cite this

    Lee, J. R., Hasolli, N., Jeon, S. M., Lee, K. S., Gang, J. H., Kim, K. D., Lee, K. Y., & Park, Y. O. (2019). Filtration performance characteristics of sticky aerosol using calcium hydroxide. Atmosphere, 10(2), [100]. https://doi.org/10.3390/ATMOS10020100