Flat lamp fabrication using thermal grown carbon nano tubes

Duck Jung Lee, Byeong Kwon Ju, Yun Hi Lee, Jae Eun Yoo, Byung Don Min, Jeung Hoon Park, Bong Chul Kim, Jin Jang, Myung Hwan Oh

Research output: Contribution to journalConference article

2 Citations (Scopus)

Abstract

We fabricated 1-inch CNTs flat lamp as diode and triode structure. The CNTs are grown on soda-lime glass substrate. In the case of triode structure, the grid was inserted between anode and cathode plate to dispersion of emitted electron and decreasing of turn on voltage. Also, the electric field distribution in panel was simulated using a maxwell simulator. And, we will introduce the direct joint method, which need not exhausting tube and hole. The CNTs-lamps are successfully packaged by both method and observed light emission of about 9. 8Kcd/m2 brightness.

Original languageEnglish
Pages (from-to)1249-1252
Number of pages4
JournalSID Conference Record of the International Display Research Conference
Publication statusPublished - 2001
EventAsia Display/IDW 2001 - Nagoya, Japan
Duration: 2002 Oct 162002 Oct 19

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Flat lamp fabrication using thermal grown carbon nano tubes'. Together they form a unique fingerprint.

  • Cite this

    Lee, D. J., Ju, B. K., Lee, Y. H., Yoo, J. E., Min, B. D., Park, J. H., Kim, B. C., Jang, J., & Oh, M. H. (2001). Flat lamp fabrication using thermal grown carbon nano tubes. SID Conference Record of the International Display Research Conference, 1249-1252.