Fouling behavior of a pilot scale inside-out hollow fiber UF membrane during dead-end filtration of tertiary wastewater

James Decarolis, Seungkwan Hong, James Taylor

Research output: Contribution to journalArticle

72 Citations (Scopus)

Abstract

A series of pilot-scale filtration experiments were performed systematically under various operating conditions to investigate the fouling behavior of ultrafiltration (UF) membranes to treat tertiary wastewater for resuse. All experiments were conducted using a pilot system, which consisted of six inside-out capillary polyether sulfone UF membrane modules (molecular-weight cutoff = 150,000 Da), arranged in parallel configuration. The pilot unit was operated in dead-end filtration mode and the membranes were frequently backwashed with chlorinated water. Results of this research clearly indicated that the productivity of the UF membranes, measured by the specific water flux (Kw), declined much faster as operating flux increased. This observation was attributed to enhanced solid and organic loading to the membrane surface at higher operating fluxes. Furthermore, the analysis of Kw variation against filtrate volume showed larger productivity reduction per foulant mass loading during operation at high flux rates, suggesting the formation of more compact cake layers which were not easily removed during backwashing. Pilot study results also demonstrated that increasing backwashing with chlorine addition significantly improved membrane productivity, primarily due to enhanced foulant removal by organic oxidation and biogrowth control. In addition, flux enhancement per backwashing volume increased with decreasing time between backwashing events. Ferric chloride pretreatment also markedly enhanced membrane productivity by increasing particle floc size, which led to decreased pore plugging, reduced cake layer resistance, and enhanced backwashing efficiency.

Original languageEnglish
Pages (from-to)165-178
Number of pages14
JournalJournal of Membrane Science
Volume191
Issue number1-2
DOIs
Publication statusPublished - 2001 Sep 30
Externally publishedYes

Fingerprint

fouling
Ultrafiltration
Waste Water
Fouling
hollow
Wastewater
membranes
Membranes
fibers
Fibers
productivity
Fluxes
Productivity
loading operations
plugging
sulfones
Water
Polyethers
Chlorine
Pilots

Keywords

  • Dead-end filtration
  • Membrane fouling
  • Ultrafiltration
  • Wastewater reclamation
  • Water treatment

ASJC Scopus subject areas

  • Filtration and Separation
  • Polymers and Plastics

Cite this

Fouling behavior of a pilot scale inside-out hollow fiber UF membrane during dead-end filtration of tertiary wastewater. / Decarolis, James; Hong, Seungkwan; Taylor, James.

In: Journal of Membrane Science, Vol. 191, No. 1-2, 30.09.2001, p. 165-178.

Research output: Contribution to journalArticle

@article{b853821f0db84a67afff0a48ac5d79e5,
title = "Fouling behavior of a pilot scale inside-out hollow fiber UF membrane during dead-end filtration of tertiary wastewater",
abstract = "A series of pilot-scale filtration experiments were performed systematically under various operating conditions to investigate the fouling behavior of ultrafiltration (UF) membranes to treat tertiary wastewater for resuse. All experiments were conducted using a pilot system, which consisted of six inside-out capillary polyether sulfone UF membrane modules (molecular-weight cutoff = 150,000 Da), arranged in parallel configuration. The pilot unit was operated in dead-end filtration mode and the membranes were frequently backwashed with chlorinated water. Results of this research clearly indicated that the productivity of the UF membranes, measured by the specific water flux (Kw), declined much faster as operating flux increased. This observation was attributed to enhanced solid and organic loading to the membrane surface at higher operating fluxes. Furthermore, the analysis of Kw variation against filtrate volume showed larger productivity reduction per foulant mass loading during operation at high flux rates, suggesting the formation of more compact cake layers which were not easily removed during backwashing. Pilot study results also demonstrated that increasing backwashing with chlorine addition significantly improved membrane productivity, primarily due to enhanced foulant removal by organic oxidation and biogrowth control. In addition, flux enhancement per backwashing volume increased with decreasing time between backwashing events. Ferric chloride pretreatment also markedly enhanced membrane productivity by increasing particle floc size, which led to decreased pore plugging, reduced cake layer resistance, and enhanced backwashing efficiency.",
keywords = "Dead-end filtration, Membrane fouling, Ultrafiltration, Wastewater reclamation, Water treatment",
author = "James Decarolis and Seungkwan Hong and James Taylor",
year = "2001",
month = "9",
day = "30",
doi = "10.1016/S0376-7388(01)00455-0",
language = "English",
volume = "191",
pages = "165--178",
journal = "Jornal of Membrane Science",
issn = "0376-7388",
publisher = "Elsevier",
number = "1-2",

}

TY - JOUR

T1 - Fouling behavior of a pilot scale inside-out hollow fiber UF membrane during dead-end filtration of tertiary wastewater

AU - Decarolis, James

AU - Hong, Seungkwan

AU - Taylor, James

PY - 2001/9/30

Y1 - 2001/9/30

N2 - A series of pilot-scale filtration experiments were performed systematically under various operating conditions to investigate the fouling behavior of ultrafiltration (UF) membranes to treat tertiary wastewater for resuse. All experiments were conducted using a pilot system, which consisted of six inside-out capillary polyether sulfone UF membrane modules (molecular-weight cutoff = 150,000 Da), arranged in parallel configuration. The pilot unit was operated in dead-end filtration mode and the membranes were frequently backwashed with chlorinated water. Results of this research clearly indicated that the productivity of the UF membranes, measured by the specific water flux (Kw), declined much faster as operating flux increased. This observation was attributed to enhanced solid and organic loading to the membrane surface at higher operating fluxes. Furthermore, the analysis of Kw variation against filtrate volume showed larger productivity reduction per foulant mass loading during operation at high flux rates, suggesting the formation of more compact cake layers which were not easily removed during backwashing. Pilot study results also demonstrated that increasing backwashing with chlorine addition significantly improved membrane productivity, primarily due to enhanced foulant removal by organic oxidation and biogrowth control. In addition, flux enhancement per backwashing volume increased with decreasing time between backwashing events. Ferric chloride pretreatment also markedly enhanced membrane productivity by increasing particle floc size, which led to decreased pore plugging, reduced cake layer resistance, and enhanced backwashing efficiency.

AB - A series of pilot-scale filtration experiments were performed systematically under various operating conditions to investigate the fouling behavior of ultrafiltration (UF) membranes to treat tertiary wastewater for resuse. All experiments were conducted using a pilot system, which consisted of six inside-out capillary polyether sulfone UF membrane modules (molecular-weight cutoff = 150,000 Da), arranged in parallel configuration. The pilot unit was operated in dead-end filtration mode and the membranes were frequently backwashed with chlorinated water. Results of this research clearly indicated that the productivity of the UF membranes, measured by the specific water flux (Kw), declined much faster as operating flux increased. This observation was attributed to enhanced solid and organic loading to the membrane surface at higher operating fluxes. Furthermore, the analysis of Kw variation against filtrate volume showed larger productivity reduction per foulant mass loading during operation at high flux rates, suggesting the formation of more compact cake layers which were not easily removed during backwashing. Pilot study results also demonstrated that increasing backwashing with chlorine addition significantly improved membrane productivity, primarily due to enhanced foulant removal by organic oxidation and biogrowth control. In addition, flux enhancement per backwashing volume increased with decreasing time between backwashing events. Ferric chloride pretreatment also markedly enhanced membrane productivity by increasing particle floc size, which led to decreased pore plugging, reduced cake layer resistance, and enhanced backwashing efficiency.

KW - Dead-end filtration

KW - Membrane fouling

KW - Ultrafiltration

KW - Wastewater reclamation

KW - Water treatment

UR - http://www.scopus.com/inward/record.url?scp=0035975723&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035975723&partnerID=8YFLogxK

U2 - 10.1016/S0376-7388(01)00455-0

DO - 10.1016/S0376-7388(01)00455-0

M3 - Article

VL - 191

SP - 165

EP - 178

JO - Jornal of Membrane Science

JF - Jornal of Membrane Science

SN - 0376-7388

IS - 1-2

ER -