Fracture mechanics analysis method for cracked components under very low cycle fatigue loading

Gyo Geun Youn, Jin Ha Hwang, Dae Young Lee, Yun Jae Kim, Jin Weon Kim, Naoki Miura

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

In this study, fracture mechanics analysis was performed to calculate crack growth under very low cycle fatigue loading conditions. The calculation results are compared with 11 experimental datasets concerning through-wall cracked pipes made from three different materials under fully reversed large-amplitude cyclic loading. In the analysis, it was assumed that the crack growth rate under large-amplitude cyclic loading is the linear summation of the fatigue crack growth rate and ductile tearing rate. Relevant fracture mechanics parameters were determined using the reference stress approach. It was found that the calculated failure cycles are around half of those using the experimental data regardless of the material and load amplitude. The most important factors affecting the calculation results were the accuracy of estimating J and ΔJ, and the crack closure coefficient when calculating ΔJ. Their effects on the analysis results are discussed herein.

Original languageEnglish
Article number104191
JournalInternational Journal of Pressure Vessels and Piping
Volume188
DOIs
Publication statusPublished - 2020 Dec
Externally publishedYes

Keywords

  • Experimental validation
  • Fracture mechanics analysis
  • Reference stress approach
  • Very low cycle fatigue

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Fracture mechanics analysis method for cracked components under very low cycle fatigue loading'. Together they form a unique fingerprint.

Cite this