Gas sensor for CO and NH 3 using polyaniline/CNTs composite at room temperature

Inho Kim, Ki Young Dong, Byeong Kwon Ju, Hyang Hee Choi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

We fabricated a gas sensor for the detection of a carbon monoxide (CO) and ammonia (NH 3) gas using single walled carbon nanotubes (SWNTs) and polyaniline(PANI) composite. The SWNTs were dispersed in sodium dodecyl sulfate (SDS) and were applied over the electrodes of an interdigitated electrodes (IDEs) by photolithography. By using this method, the active area for gas sensing can be denned more clearly than with simple dropping or stamping, though it is still difficult to control the concentration of dispersed composite. Our sensor showed faster response to the CO gas than the NH 3 gas. The CO increased the conductance of the composite, while NH 3 showed an opposite response. Nevertheless, the composite were more adsorptive to CO than NH 3. In addition, we observed CO and NH 3 gases were mixed carefully with the same concentrations of 5 ppm.

Original languageEnglish
Title of host publication2010 10th IEEE Conference on Nanotechnology, NANO 2010
Pages466-469
Number of pages4
DOIs
Publication statusPublished - 2010 Dec 1
Event2010 10th IEEE Conference on Nanotechnology, NANO 2010 - Ilsan, Gyeonggi-Do, Korea, Republic of
Duration: 2010 Aug 172010 Aug 20

Other

Other2010 10th IEEE Conference on Nanotechnology, NANO 2010
CountryKorea, Republic of
CityIlsan, Gyeonggi-Do
Period10/8/1710/8/20

Fingerprint

carbon monoxide
carbon nanotubes
composite materials
sensors
room temperature
gases
stamping
electrodes
photolithography
sodium sulfates
ammonia

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics

Cite this

Kim, I., Dong, K. Y., Ju, B. K., & Choi, H. H. (2010). Gas sensor for CO and NH 3 using polyaniline/CNTs composite at room temperature. In 2010 10th IEEE Conference on Nanotechnology, NANO 2010 (pp. 466-469). [5697782] https://doi.org/10.1109/NANO.2010.5697782

Gas sensor for CO and NH 3 using polyaniline/CNTs composite at room temperature. / Kim, Inho; Dong, Ki Young; Ju, Byeong Kwon; Choi, Hyang Hee.

2010 10th IEEE Conference on Nanotechnology, NANO 2010. 2010. p. 466-469 5697782.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kim, I, Dong, KY, Ju, BK & Choi, HH 2010, Gas sensor for CO and NH 3 using polyaniline/CNTs composite at room temperature. in 2010 10th IEEE Conference on Nanotechnology, NANO 2010., 5697782, pp. 466-469, 2010 10th IEEE Conference on Nanotechnology, NANO 2010, Ilsan, Gyeonggi-Do, Korea, Republic of, 10/8/17. https://doi.org/10.1109/NANO.2010.5697782
Kim I, Dong KY, Ju BK, Choi HH. Gas sensor for CO and NH 3 using polyaniline/CNTs composite at room temperature. In 2010 10th IEEE Conference on Nanotechnology, NANO 2010. 2010. p. 466-469. 5697782 https://doi.org/10.1109/NANO.2010.5697782
Kim, Inho ; Dong, Ki Young ; Ju, Byeong Kwon ; Choi, Hyang Hee. / Gas sensor for CO and NH 3 using polyaniline/CNTs composite at room temperature. 2010 10th IEEE Conference on Nanotechnology, NANO 2010. 2010. pp. 466-469
@inproceedings{16e36a88bc5742b3b99fe49a4149d83f,
title = "Gas sensor for CO and NH 3 using polyaniline/CNTs composite at room temperature",
abstract = "We fabricated a gas sensor for the detection of a carbon monoxide (CO) and ammonia (NH 3) gas using single walled carbon nanotubes (SWNTs) and polyaniline(PANI) composite. The SWNTs were dispersed in sodium dodecyl sulfate (SDS) and were applied over the electrodes of an interdigitated electrodes (IDEs) by photolithography. By using this method, the active area for gas sensing can be denned more clearly than with simple dropping or stamping, though it is still difficult to control the concentration of dispersed composite. Our sensor showed faster response to the CO gas than the NH 3 gas. The CO increased the conductance of the composite, while NH 3 showed an opposite response. Nevertheless, the composite were more adsorptive to CO than NH 3. In addition, we observed CO and NH 3 gases were mixed carefully with the same concentrations of 5 ppm.",
author = "Inho Kim and Dong, {Ki Young} and Ju, {Byeong Kwon} and Choi, {Hyang Hee}",
year = "2010",
month = "12",
day = "1",
doi = "10.1109/NANO.2010.5697782",
language = "English",
isbn = "9781424470334",
pages = "466--469",
booktitle = "2010 10th IEEE Conference on Nanotechnology, NANO 2010",

}

TY - GEN

T1 - Gas sensor for CO and NH 3 using polyaniline/CNTs composite at room temperature

AU - Kim, Inho

AU - Dong, Ki Young

AU - Ju, Byeong Kwon

AU - Choi, Hyang Hee

PY - 2010/12/1

Y1 - 2010/12/1

N2 - We fabricated a gas sensor for the detection of a carbon monoxide (CO) and ammonia (NH 3) gas using single walled carbon nanotubes (SWNTs) and polyaniline(PANI) composite. The SWNTs were dispersed in sodium dodecyl sulfate (SDS) and were applied over the electrodes of an interdigitated electrodes (IDEs) by photolithography. By using this method, the active area for gas sensing can be denned more clearly than with simple dropping or stamping, though it is still difficult to control the concentration of dispersed composite. Our sensor showed faster response to the CO gas than the NH 3 gas. The CO increased the conductance of the composite, while NH 3 showed an opposite response. Nevertheless, the composite were more adsorptive to CO than NH 3. In addition, we observed CO and NH 3 gases were mixed carefully with the same concentrations of 5 ppm.

AB - We fabricated a gas sensor for the detection of a carbon monoxide (CO) and ammonia (NH 3) gas using single walled carbon nanotubes (SWNTs) and polyaniline(PANI) composite. The SWNTs were dispersed in sodium dodecyl sulfate (SDS) and were applied over the electrodes of an interdigitated electrodes (IDEs) by photolithography. By using this method, the active area for gas sensing can be denned more clearly than with simple dropping or stamping, though it is still difficult to control the concentration of dispersed composite. Our sensor showed faster response to the CO gas than the NH 3 gas. The CO increased the conductance of the composite, while NH 3 showed an opposite response. Nevertheless, the composite were more adsorptive to CO than NH 3. In addition, we observed CO and NH 3 gases were mixed carefully with the same concentrations of 5 ppm.

UR - http://www.scopus.com/inward/record.url?scp=79951836050&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79951836050&partnerID=8YFLogxK

U2 - 10.1109/NANO.2010.5697782

DO - 10.1109/NANO.2010.5697782

M3 - Conference contribution

SN - 9781424470334

SP - 466

EP - 469

BT - 2010 10th IEEE Conference on Nanotechnology, NANO 2010

ER -