Glass substrate with UV imprinted polymer moth eye structure

Sung Hoon Hong, Eun Ju Hong, Byeong Ju Bae, Heon Lee

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Artificial polycarbonate moth eye structured plate was used to emboss the moth eye nano-pattern into PVC films. Embossing was done at 100°C to prevent any damage on polycarbonate template. With embossing of moth eye nano-patterns, transmittance of PVC film was increased up to 6% over 400nm to 800nm wavelength region. This embossed PVC film was then used as an imprint template after depositing thin layer of SiO2 and self-assembled monolayer. Consequently, polymer based moth eye nano-patterns were formed on glass template after UV imprinting and its transmittance was increased from 90% to 92%.

Original languageEnglish
Title of host publicationAdvanced Materials Research
Pages1241-1244
Number of pages4
Volume47-50 PART 2
Publication statusPublished - 2008 Nov 24
EventMulti-functional Materials and Structures - International Conference on Multifunctional Materials and Structures - Hong Kong, P.R., China
Duration: 2008 Jul 282008 Jul 31

Publication series

NameAdvanced Materials Research
Volume47-50 PART 2
ISSN (Print)10226680

Other

OtherMulti-functional Materials and Structures - International Conference on Multifunctional Materials and Structures
CountryChina
CityHong Kong, P.R.
Period08/7/2808/7/31

    Fingerprint

Keywords

  • Antireflection
  • FDTD simulation
  • Moth eye structure
  • Nano-pattern
  • Polycarbonate
  • Polyvinyl chloride (PVC)
  • Transmittance
  • UV imprint

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Hong, S. H., Hong, E. J., Bae, B. J., & Lee, H. (2008). Glass substrate with UV imprinted polymer moth eye structure. In Advanced Materials Research (Vol. 47-50 PART 2, pp. 1241-1244). (Advanced Materials Research; Vol. 47-50 PART 2).