Healing of Microdefects in SSZ-13 Membranes via Filling with Dye Molecules and Its Effect on Dry and Wet CO2 Separations

Sungwon Hong, Dongjae Kim, Yanghwan Jeong, Eunjoo Kim, Jae Chil Jung, Nakwon Choi, Jaewook Nam, Alex C.K. Yip, Jungkyu Choi

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

It is quite challenging to avoid microdefect formation during hydrothermal growths and/or calcination processes, while manufacturing high-quality zeolite membranes in a reproducible manner. Even less than 1% of defects, which generally provide nonselective pathways, will considerably worsen the intrinsic, high molecular sieving-based separation performance of a continuous zeolite membrane. Herein, we propose a simple and reliable method for blocking defects using water-soluble dye molecules, which were originally used for the visualization of nonzeolitic, defective structures in a zeolite membrane. Because the dye molecules are ∼1 nm in size, they cannot diffuse into the zeolitic pores and selectively access the defects. For the demonstration of dye-based defect healing, we chose a siliceous chabazite type SSZ-13 zeolite membrane (pore size = 0.37 × 0.42 nm2) with some degree of defects and investigated the effect of defect healing on the final CO2 separation performance. Because the defects were gradually filled by the dye molecules, both CO2/N2 and CO2/CH4 separation performances were concomitantly increased. Intriguingly, the CO2 perm-selectivity test with ternary mixtures including H2O vapor (the third largest component in the flue and natural/shale/bio gas streams) in the feed diminished CO2 separation performance. This could be ascribed to inhibited transport of the fast permeating species, here CO2, from the adsorbed H2O molecules on the dye-treated and water-friendly (relatively hydrophilic) membrane surface. On the contrary, the intact, siliceous (water-repelling or hydrophobic) SSZ-13 membranes showed improved CO2 perm-selectivities in the presence of H2O vapor, seemingly due to defect blocking by the physisorbed H2O molecules.

Original languageEnglish
Pages (from-to)3346-3358
Number of pages13
JournalChemistry of Materials
Volume30
Issue number10
DOIs
Publication statusPublished - 2018 May 22

Fingerprint

Coloring Agents
Dyes
Membranes
Zeolites
Defects
Molecules
Water
Vapors
Biogas
Shale
Calcination
Pore size
Demonstrations
Visualization

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Materials Chemistry

Cite this

Healing of Microdefects in SSZ-13 Membranes via Filling with Dye Molecules and Its Effect on Dry and Wet CO2 Separations. / Hong, Sungwon; Kim, Dongjae; Jeong, Yanghwan; Kim, Eunjoo; Jung, Jae Chil; Choi, Nakwon; Nam, Jaewook; Yip, Alex C.K.; Choi, Jungkyu.

In: Chemistry of Materials, Vol. 30, No. 10, 22.05.2018, p. 3346-3358.

Research output: Contribution to journalArticle

Hong, Sungwon ; Kim, Dongjae ; Jeong, Yanghwan ; Kim, Eunjoo ; Jung, Jae Chil ; Choi, Nakwon ; Nam, Jaewook ; Yip, Alex C.K. ; Choi, Jungkyu. / Healing of Microdefects in SSZ-13 Membranes via Filling with Dye Molecules and Its Effect on Dry and Wet CO2 Separations. In: Chemistry of Materials. 2018 ; Vol. 30, No. 10. pp. 3346-3358.
@article{be74be691fd949659ff0354d10f78a46,
title = "Healing of Microdefects in SSZ-13 Membranes via Filling with Dye Molecules and Its Effect on Dry and Wet CO2 Separations",
abstract = "It is quite challenging to avoid microdefect formation during hydrothermal growths and/or calcination processes, while manufacturing high-quality zeolite membranes in a reproducible manner. Even less than 1{\%} of defects, which generally provide nonselective pathways, will considerably worsen the intrinsic, high molecular sieving-based separation performance of a continuous zeolite membrane. Herein, we propose a simple and reliable method for blocking defects using water-soluble dye molecules, which were originally used for the visualization of nonzeolitic, defective structures in a zeolite membrane. Because the dye molecules are ∼1 nm in size, they cannot diffuse into the zeolitic pores and selectively access the defects. For the demonstration of dye-based defect healing, we chose a siliceous chabazite type SSZ-13 zeolite membrane (pore size = 0.37 × 0.42 nm2) with some degree of defects and investigated the effect of defect healing on the final CO2 separation performance. Because the defects were gradually filled by the dye molecules, both CO2/N2 and CO2/CH4 separation performances were concomitantly increased. Intriguingly, the CO2 perm-selectivity test with ternary mixtures including H2O vapor (the third largest component in the flue and natural/shale/bio gas streams) in the feed diminished CO2 separation performance. This could be ascribed to inhibited transport of the fast permeating species, here CO2, from the adsorbed H2O molecules on the dye-treated and water-friendly (relatively hydrophilic) membrane surface. On the contrary, the intact, siliceous (water-repelling or hydrophobic) SSZ-13 membranes showed improved CO2 perm-selectivities in the presence of H2O vapor, seemingly due to defect blocking by the physisorbed H2O molecules.",
author = "Sungwon Hong and Dongjae Kim and Yanghwan Jeong and Eunjoo Kim and Jung, {Jae Chil} and Nakwon Choi and Jaewook Nam and Yip, {Alex C.K.} and Jungkyu Choi",
year = "2018",
month = "5",
day = "22",
doi = "10.1021/acs.chemmater.8b00757",
language = "English",
volume = "30",
pages = "3346--3358",
journal = "Chemistry of Materials",
issn = "0897-4756",
publisher = "American Chemical Society",
number = "10",

}

TY - JOUR

T1 - Healing of Microdefects in SSZ-13 Membranes via Filling with Dye Molecules and Its Effect on Dry and Wet CO2 Separations

AU - Hong, Sungwon

AU - Kim, Dongjae

AU - Jeong, Yanghwan

AU - Kim, Eunjoo

AU - Jung, Jae Chil

AU - Choi, Nakwon

AU - Nam, Jaewook

AU - Yip, Alex C.K.

AU - Choi, Jungkyu

PY - 2018/5/22

Y1 - 2018/5/22

N2 - It is quite challenging to avoid microdefect formation during hydrothermal growths and/or calcination processes, while manufacturing high-quality zeolite membranes in a reproducible manner. Even less than 1% of defects, which generally provide nonselective pathways, will considerably worsen the intrinsic, high molecular sieving-based separation performance of a continuous zeolite membrane. Herein, we propose a simple and reliable method for blocking defects using water-soluble dye molecules, which were originally used for the visualization of nonzeolitic, defective structures in a zeolite membrane. Because the dye molecules are ∼1 nm in size, they cannot diffuse into the zeolitic pores and selectively access the defects. For the demonstration of dye-based defect healing, we chose a siliceous chabazite type SSZ-13 zeolite membrane (pore size = 0.37 × 0.42 nm2) with some degree of defects and investigated the effect of defect healing on the final CO2 separation performance. Because the defects were gradually filled by the dye molecules, both CO2/N2 and CO2/CH4 separation performances were concomitantly increased. Intriguingly, the CO2 perm-selectivity test with ternary mixtures including H2O vapor (the third largest component in the flue and natural/shale/bio gas streams) in the feed diminished CO2 separation performance. This could be ascribed to inhibited transport of the fast permeating species, here CO2, from the adsorbed H2O molecules on the dye-treated and water-friendly (relatively hydrophilic) membrane surface. On the contrary, the intact, siliceous (water-repelling or hydrophobic) SSZ-13 membranes showed improved CO2 perm-selectivities in the presence of H2O vapor, seemingly due to defect blocking by the physisorbed H2O molecules.

AB - It is quite challenging to avoid microdefect formation during hydrothermal growths and/or calcination processes, while manufacturing high-quality zeolite membranes in a reproducible manner. Even less than 1% of defects, which generally provide nonselective pathways, will considerably worsen the intrinsic, high molecular sieving-based separation performance of a continuous zeolite membrane. Herein, we propose a simple and reliable method for blocking defects using water-soluble dye molecules, which were originally used for the visualization of nonzeolitic, defective structures in a zeolite membrane. Because the dye molecules are ∼1 nm in size, they cannot diffuse into the zeolitic pores and selectively access the defects. For the demonstration of dye-based defect healing, we chose a siliceous chabazite type SSZ-13 zeolite membrane (pore size = 0.37 × 0.42 nm2) with some degree of defects and investigated the effect of defect healing on the final CO2 separation performance. Because the defects were gradually filled by the dye molecules, both CO2/N2 and CO2/CH4 separation performances were concomitantly increased. Intriguingly, the CO2 perm-selectivity test with ternary mixtures including H2O vapor (the third largest component in the flue and natural/shale/bio gas streams) in the feed diminished CO2 separation performance. This could be ascribed to inhibited transport of the fast permeating species, here CO2, from the adsorbed H2O molecules on the dye-treated and water-friendly (relatively hydrophilic) membrane surface. On the contrary, the intact, siliceous (water-repelling or hydrophobic) SSZ-13 membranes showed improved CO2 perm-selectivities in the presence of H2O vapor, seemingly due to defect blocking by the physisorbed H2O molecules.

UR - http://www.scopus.com/inward/record.url?scp=85047555801&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85047555801&partnerID=8YFLogxK

U2 - 10.1021/acs.chemmater.8b00757

DO - 10.1021/acs.chemmater.8b00757

M3 - Article

AN - SCOPUS:85047555801

VL - 30

SP - 3346

EP - 3358

JO - Chemistry of Materials

JF - Chemistry of Materials

SN - 0897-4756

IS - 10

ER -