HF2V dissipator effects on the performance of a 3 story moment frame

Tobias Bacht, J. Geoffrey Chase, Gregory MacRae, Geoffrey W. Rodgers, Timon Rabczuk, Rajesh P. Dhakal, Jonathan Desombre

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

In this paper, the seismic performance of the as-designed SAC Los Angeles 3 story seismic frame with rigid moment connections at the beam ends is compared with that of the same frame using semirigid connections with high force-to-volume (HF2V) lead dissipators. The presence of the gravity frames in the model is also considered. It was found that the placement of dissipators, ignoring the effect of the gravity frames, caused a 12% increase in period of the frame due to the decreased stiffness of the connections. During design level ground shaking the semi-rigid connections with HF2V dissipators have slightly lower accelerations, up to an 80% increase in peak drift, and a 200% increase in the permanent displacement compared to the as-designed case, but no structural damage is expected. When the gravity frames are considered, the floor accelerations decrease further, the peak displacements do not significantly change, but the residual story dirft ratios reduce to approximately 0.17%. This result is less than one half that of the as-designed frame, where typically gravity frame effects are not considered. The realistic analyses combining HF2V lead dissipators with gravity frames and well-designed non-structural elements creates a system with almost no structural damage and low residual displacements.

Original languageEnglish
Pages (from-to)1843-1849
Number of pages7
JournalJournal of Constructional Steel Research
Volume67
Issue number12
DOIs
Publication statusPublished - 2011 Dec 1
Externally publishedYes

Fingerprint

Gravitation
Stiffness

Keywords

  • Damage Avoidance Design
  • Earthquake excitation
  • Lead extrusion dampers
  • Numerical modeling
  • SAC
  • Steel connections

ASJC Scopus subject areas

  • Building and Construction
  • Civil and Structural Engineering
  • Mechanics of Materials
  • Metals and Alloys

Cite this

Bacht, T., Chase, J. G., MacRae, G., Rodgers, G. W., Rabczuk, T., Dhakal, R. P., & Desombre, J. (2011). HF2V dissipator effects on the performance of a 3 story moment frame. Journal of Constructional Steel Research, 67(12), 1843-1849. https://doi.org/10.1016/j.jcsr.2011.05.007

HF2V dissipator effects on the performance of a 3 story moment frame. / Bacht, Tobias; Chase, J. Geoffrey; MacRae, Gregory; Rodgers, Geoffrey W.; Rabczuk, Timon; Dhakal, Rajesh P.; Desombre, Jonathan.

In: Journal of Constructional Steel Research, Vol. 67, No. 12, 01.12.2011, p. 1843-1849.

Research output: Contribution to journalArticle

Bacht, T, Chase, JG, MacRae, G, Rodgers, GW, Rabczuk, T, Dhakal, RP & Desombre, J 2011, 'HF2V dissipator effects on the performance of a 3 story moment frame', Journal of Constructional Steel Research, vol. 67, no. 12, pp. 1843-1849. https://doi.org/10.1016/j.jcsr.2011.05.007
Bacht T, Chase JG, MacRae G, Rodgers GW, Rabczuk T, Dhakal RP et al. HF2V dissipator effects on the performance of a 3 story moment frame. Journal of Constructional Steel Research. 2011 Dec 1;67(12):1843-1849. https://doi.org/10.1016/j.jcsr.2011.05.007
Bacht, Tobias ; Chase, J. Geoffrey ; MacRae, Gregory ; Rodgers, Geoffrey W. ; Rabczuk, Timon ; Dhakal, Rajesh P. ; Desombre, Jonathan. / HF2V dissipator effects on the performance of a 3 story moment frame. In: Journal of Constructional Steel Research. 2011 ; Vol. 67, No. 12. pp. 1843-1849.
@article{d0cc218c75d54b7bb111bcdf06369fed,
title = "HF2V dissipator effects on the performance of a 3 story moment frame",
abstract = "In this paper, the seismic performance of the as-designed SAC Los Angeles 3 story seismic frame with rigid moment connections at the beam ends is compared with that of the same frame using semirigid connections with high force-to-volume (HF2V) lead dissipators. The presence of the gravity frames in the model is also considered. It was found that the placement of dissipators, ignoring the effect of the gravity frames, caused a 12{\%} increase in period of the frame due to the decreased stiffness of the connections. During design level ground shaking the semi-rigid connections with HF2V dissipators have slightly lower accelerations, up to an 80{\%} increase in peak drift, and a 200{\%} increase in the permanent displacement compared to the as-designed case, but no structural damage is expected. When the gravity frames are considered, the floor accelerations decrease further, the peak displacements do not significantly change, but the residual story dirft ratios reduce to approximately 0.17{\%}. This result is less than one half that of the as-designed frame, where typically gravity frame effects are not considered. The realistic analyses combining HF2V lead dissipators with gravity frames and well-designed non-structural elements creates a system with almost no structural damage and low residual displacements.",
keywords = "Damage Avoidance Design, Earthquake excitation, Lead extrusion dampers, Numerical modeling, SAC, Steel connections",
author = "Tobias Bacht and Chase, {J. Geoffrey} and Gregory MacRae and Rodgers, {Geoffrey W.} and Timon Rabczuk and Dhakal, {Rajesh P.} and Jonathan Desombre",
year = "2011",
month = "12",
day = "1",
doi = "10.1016/j.jcsr.2011.05.007",
language = "English",
volume = "67",
pages = "1843--1849",
journal = "Journal of Constructional Steel Research",
issn = "0143-974X",
publisher = "Elsevier BV",
number = "12",

}

TY - JOUR

T1 - HF2V dissipator effects on the performance of a 3 story moment frame

AU - Bacht, Tobias

AU - Chase, J. Geoffrey

AU - MacRae, Gregory

AU - Rodgers, Geoffrey W.

AU - Rabczuk, Timon

AU - Dhakal, Rajesh P.

AU - Desombre, Jonathan

PY - 2011/12/1

Y1 - 2011/12/1

N2 - In this paper, the seismic performance of the as-designed SAC Los Angeles 3 story seismic frame with rigid moment connections at the beam ends is compared with that of the same frame using semirigid connections with high force-to-volume (HF2V) lead dissipators. The presence of the gravity frames in the model is also considered. It was found that the placement of dissipators, ignoring the effect of the gravity frames, caused a 12% increase in period of the frame due to the decreased stiffness of the connections. During design level ground shaking the semi-rigid connections with HF2V dissipators have slightly lower accelerations, up to an 80% increase in peak drift, and a 200% increase in the permanent displacement compared to the as-designed case, but no structural damage is expected. When the gravity frames are considered, the floor accelerations decrease further, the peak displacements do not significantly change, but the residual story dirft ratios reduce to approximately 0.17%. This result is less than one half that of the as-designed frame, where typically gravity frame effects are not considered. The realistic analyses combining HF2V lead dissipators with gravity frames and well-designed non-structural elements creates a system with almost no structural damage and low residual displacements.

AB - In this paper, the seismic performance of the as-designed SAC Los Angeles 3 story seismic frame with rigid moment connections at the beam ends is compared with that of the same frame using semirigid connections with high force-to-volume (HF2V) lead dissipators. The presence of the gravity frames in the model is also considered. It was found that the placement of dissipators, ignoring the effect of the gravity frames, caused a 12% increase in period of the frame due to the decreased stiffness of the connections. During design level ground shaking the semi-rigid connections with HF2V dissipators have slightly lower accelerations, up to an 80% increase in peak drift, and a 200% increase in the permanent displacement compared to the as-designed case, but no structural damage is expected. When the gravity frames are considered, the floor accelerations decrease further, the peak displacements do not significantly change, but the residual story dirft ratios reduce to approximately 0.17%. This result is less than one half that of the as-designed frame, where typically gravity frame effects are not considered. The realistic analyses combining HF2V lead dissipators with gravity frames and well-designed non-structural elements creates a system with almost no structural damage and low residual displacements.

KW - Damage Avoidance Design

KW - Earthquake excitation

KW - Lead extrusion dampers

KW - Numerical modeling

KW - SAC

KW - Steel connections

UR - http://www.scopus.com/inward/record.url?scp=80051549424&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80051549424&partnerID=8YFLogxK

U2 - 10.1016/j.jcsr.2011.05.007

DO - 10.1016/j.jcsr.2011.05.007

M3 - Article

VL - 67

SP - 1843

EP - 1849

JO - Journal of Constructional Steel Research

JF - Journal of Constructional Steel Research

SN - 0143-974X

IS - 12

ER -