Highly efficient wettability control via three-dimensional (3D) suspension of titania nanoparticles in polystyrene nanofibers

Min Wook Lee, Seongpil An, Bhavana Joshi, Sanjay S. Latthe, Suk Goo Yoon

Research output: Contribution to journalArticle

31 Citations (Scopus)

Abstract

Electrospinning is a simple and highly versatile method for the large-scale fabrication of polymeric nanofibers. Additives or fillers can also be used to functionalize the nanofibers for use in specific applications. Herein, we demonstrate a novel and efficient way to fabricate superhydrophobic to hydrophilic tunable mats with the combined use of electrospinning and electrospraying that may be suitable for mass production on the merits of rapid deposition. The tunable nanocomposite mats were comprised of hydrophobic polystyrene nanofibers and hydrophilic titania nanoparticles. When the electrical conductivity of the electrospinning solution was increased, the surface morphology of the mats changed noticeably from a bead-on-string structure to an almost bead-free structure. Polystyrene (PS)-titania nanocomposite mats initially yielded a static water contact angle as high as 140° ± 3°. Subsequently exposing these mats with relatively weak ultraviolet irradiation (λ = 365 nm, I = 0.6 mW/cm2) for 2 h, the unique 3D suspension of the photoactive titania nanoparticles maximized the hydrophilic performance of the mats, reducing the static water contact angle to as low as 26° ± 2°. The tunable mats were characterized by scanning electron microscopy (SEM), static water contact angle (WCA) measurements, and energy-dispersive X-ray spectroscopy (EDX). Our findings confirmed that the tunable mats fabricated by the simultaneous implementation of electrospraying and electrospinning had the most efficient ultraviolet (UV)-driven wettability control in terms of cost-effectiveness. Well-controlled tunable hydrophobic and hydrophilic mats find potential applications in functional textiles, environmental membranes, biological sensors, scaffolds, and transport media.

Original languageEnglish
Pages (from-to)1232-1239
Number of pages8
JournalACS Applied Materials and Interfaces
Volume5
Issue number4
DOIs
Publication statusPublished - 2013 Mar 11

Fingerprint

Nanofibers
Wettability
Polystyrenes
Electrospinning
Nanoparticles
Wetting
Nanocomposites
Suspensions
Titanium
Contact angle
Water
X-Ray Emission Spectrometry
Electric Conductivity
Textiles
Biological membranes
Electron Scanning Microscopy
Cost-Benefit Analysis
Angle measurement
Cost effectiveness
Scaffolds

Keywords

  • 3D suspension
  • electrospinning
  • electrospray
  • polystyrene nanofibers
  • titania nanoparticles
  • wettability

ASJC Scopus subject areas

  • Materials Science(all)
  • Medicine(all)

Cite this

Highly efficient wettability control via three-dimensional (3D) suspension of titania nanoparticles in polystyrene nanofibers. / Lee, Min Wook; An, Seongpil; Joshi, Bhavana; Latthe, Sanjay S.; Yoon, Suk Goo.

In: ACS Applied Materials and Interfaces, Vol. 5, No. 4, 11.03.2013, p. 1232-1239.

Research output: Contribution to journalArticle

@article{6fe7ba69053b444084c6b1abefbf48a5,
title = "Highly efficient wettability control via three-dimensional (3D) suspension of titania nanoparticles in polystyrene nanofibers",
abstract = "Electrospinning is a simple and highly versatile method for the large-scale fabrication of polymeric nanofibers. Additives or fillers can also be used to functionalize the nanofibers for use in specific applications. Herein, we demonstrate a novel and efficient way to fabricate superhydrophobic to hydrophilic tunable mats with the combined use of electrospinning and electrospraying that may be suitable for mass production on the merits of rapid deposition. The tunable nanocomposite mats were comprised of hydrophobic polystyrene nanofibers and hydrophilic titania nanoparticles. When the electrical conductivity of the electrospinning solution was increased, the surface morphology of the mats changed noticeably from a bead-on-string structure to an almost bead-free structure. Polystyrene (PS)-titania nanocomposite mats initially yielded a static water contact angle as high as 140° ± 3°. Subsequently exposing these mats with relatively weak ultraviolet irradiation (λ = 365 nm, I = 0.6 mW/cm2) for 2 h, the unique 3D suspension of the photoactive titania nanoparticles maximized the hydrophilic performance of the mats, reducing the static water contact angle to as low as 26° ± 2°. The tunable mats were characterized by scanning electron microscopy (SEM), static water contact angle (WCA) measurements, and energy-dispersive X-ray spectroscopy (EDX). Our findings confirmed that the tunable mats fabricated by the simultaneous implementation of electrospraying and electrospinning had the most efficient ultraviolet (UV)-driven wettability control in terms of cost-effectiveness. Well-controlled tunable hydrophobic and hydrophilic mats find potential applications in functional textiles, environmental membranes, biological sensors, scaffolds, and transport media.",
keywords = "3D suspension, electrospinning, electrospray, polystyrene nanofibers, titania nanoparticles, wettability",
author = "Lee, {Min Wook} and Seongpil An and Bhavana Joshi and Latthe, {Sanjay S.} and Yoon, {Suk Goo}",
year = "2013",
month = "3",
day = "11",
doi = "10.1021/am303008s",
language = "English",
volume = "5",
pages = "1232--1239",
journal = "ACS applied materials & interfaces",
issn = "1944-8244",
publisher = "American Chemical Society",
number = "4",

}

TY - JOUR

T1 - Highly efficient wettability control via three-dimensional (3D) suspension of titania nanoparticles in polystyrene nanofibers

AU - Lee, Min Wook

AU - An, Seongpil

AU - Joshi, Bhavana

AU - Latthe, Sanjay S.

AU - Yoon, Suk Goo

PY - 2013/3/11

Y1 - 2013/3/11

N2 - Electrospinning is a simple and highly versatile method for the large-scale fabrication of polymeric nanofibers. Additives or fillers can also be used to functionalize the nanofibers for use in specific applications. Herein, we demonstrate a novel and efficient way to fabricate superhydrophobic to hydrophilic tunable mats with the combined use of electrospinning and electrospraying that may be suitable for mass production on the merits of rapid deposition. The tunable nanocomposite mats were comprised of hydrophobic polystyrene nanofibers and hydrophilic titania nanoparticles. When the electrical conductivity of the electrospinning solution was increased, the surface morphology of the mats changed noticeably from a bead-on-string structure to an almost bead-free structure. Polystyrene (PS)-titania nanocomposite mats initially yielded a static water contact angle as high as 140° ± 3°. Subsequently exposing these mats with relatively weak ultraviolet irradiation (λ = 365 nm, I = 0.6 mW/cm2) for 2 h, the unique 3D suspension of the photoactive titania nanoparticles maximized the hydrophilic performance of the mats, reducing the static water contact angle to as low as 26° ± 2°. The tunable mats were characterized by scanning electron microscopy (SEM), static water contact angle (WCA) measurements, and energy-dispersive X-ray spectroscopy (EDX). Our findings confirmed that the tunable mats fabricated by the simultaneous implementation of electrospraying and electrospinning had the most efficient ultraviolet (UV)-driven wettability control in terms of cost-effectiveness. Well-controlled tunable hydrophobic and hydrophilic mats find potential applications in functional textiles, environmental membranes, biological sensors, scaffolds, and transport media.

AB - Electrospinning is a simple and highly versatile method for the large-scale fabrication of polymeric nanofibers. Additives or fillers can also be used to functionalize the nanofibers for use in specific applications. Herein, we demonstrate a novel and efficient way to fabricate superhydrophobic to hydrophilic tunable mats with the combined use of electrospinning and electrospraying that may be suitable for mass production on the merits of rapid deposition. The tunable nanocomposite mats were comprised of hydrophobic polystyrene nanofibers and hydrophilic titania nanoparticles. When the electrical conductivity of the electrospinning solution was increased, the surface morphology of the mats changed noticeably from a bead-on-string structure to an almost bead-free structure. Polystyrene (PS)-titania nanocomposite mats initially yielded a static water contact angle as high as 140° ± 3°. Subsequently exposing these mats with relatively weak ultraviolet irradiation (λ = 365 nm, I = 0.6 mW/cm2) for 2 h, the unique 3D suspension of the photoactive titania nanoparticles maximized the hydrophilic performance of the mats, reducing the static water contact angle to as low as 26° ± 2°. The tunable mats were characterized by scanning electron microscopy (SEM), static water contact angle (WCA) measurements, and energy-dispersive X-ray spectroscopy (EDX). Our findings confirmed that the tunable mats fabricated by the simultaneous implementation of electrospraying and electrospinning had the most efficient ultraviolet (UV)-driven wettability control in terms of cost-effectiveness. Well-controlled tunable hydrophobic and hydrophilic mats find potential applications in functional textiles, environmental membranes, biological sensors, scaffolds, and transport media.

KW - 3D suspension

KW - electrospinning

KW - electrospray

KW - polystyrene nanofibers

KW - titania nanoparticles

KW - wettability

UR - http://www.scopus.com/inward/record.url?scp=84874609602&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84874609602&partnerID=8YFLogxK

U2 - 10.1021/am303008s

DO - 10.1021/am303008s

M3 - Article

VL - 5

SP - 1232

EP - 1239

JO - ACS applied materials & interfaces

JF - ACS applied materials & interfaces

SN - 1944-8244

IS - 4

ER -