Implementation and validation of a 6 degrees-of-freedom nonlinear helicopter model

Carlo A. Gerboni, Frank M. Nieuwenhuizen, Heinrich Bulthoff

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The paper describes the implementation and validation of a nonlinear model of the UH-60 helicopter. The implemented model is based on a physical vehicle and includes various important subsystems in order to increase the model fidelity. The validation is carried out through a Handling Qualities (HQ) evaluation and a comparison with flight data. Various standardized tests have been performed in the time and frequency domain for hover and the forward flight condition. Results obtained have been analyzed according to the criteria defined by the Aeronautical Design Standard ADS-33E-PRF. The behavior of our helicopter model is very similar to flight test data of the UH-60 in hover and in forward flight, although some coupling effects are not well described. Overall the model provides a reliable basis for use in motion-base simulators and as framework for conducting studies on control augmentation systems.

Original languageEnglish
Title of host publicationAIAA Modeling and Simulation Technologies Conference
PublisherAmerican Institute of Aeronautics and Astronautics Inc, AIAA
ISBN (Print)9781624103872
Publication statusPublished - 2016
EventAIAA Modeling and Simulation Technologies Conference, 2016 - San Diego, United States
Duration: 2016 Jan 42016 Jan 8

Other

OtherAIAA Modeling and Simulation Technologies Conference, 2016
CountryUnited States
CitySan Diego
Period16/1/416/1/8

    Fingerprint

ASJC Scopus subject areas

  • Aerospace Engineering
  • Modelling and Simulation

Cite this

Gerboni, C. A., Nieuwenhuizen, F. M., & Bulthoff, H. (2016). Implementation and validation of a 6 degrees-of-freedom nonlinear helicopter model. In AIAA Modeling and Simulation Technologies Conference American Institute of Aeronautics and Astronautics Inc, AIAA.