In situ fabrication of Si3N4/SiC nanocomposite using a commercial polymer

Chang Sam Kim, Yoon Suk Oh, Woo Seok Cho, Dae-Soon Lim, Deock Soo Cheong

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

Si3N4/SiC nanocomposite has been prepared using a chemical reaction between Si3N4 powder and phenolic resin as a commercial polymer. The polymer was an effective source that could provide free carbon for fabrication of the nanocomposite. In mixture containing both the Si3N4 powder, which contained some amount of SiO2, and the polymer, SiC nanoparticles were considered to be formed by direct reaction between carbon and Si3N4/SiO2. Sizes of the formed SiC particles were in the range of 10-200 nm. The SiC particles were well dispersed in the matrix.

Original languageEnglish
Pages (from-to)229-233
Number of pages5
JournalJournal of Alloys and Compounds
Volume274
Issue number1-2
Publication statusPublished - 1998 Jun 26

Fingerprint

Nanocomposites
Polymers
Fabrication
Powders
Phenolic resins
Carbon
Chemical reactions
Nanoparticles
silicon nitride

Keywords

  • In situ fabrication
  • Nanocomposite
  • Polymer
  • SiN/SiC

ASJC Scopus subject areas

  • Metals and Alloys

Cite this

Kim, C. S., Oh, Y. S., Cho, W. S., Lim, D-S., & Cheong, D. S. (1998). In situ fabrication of Si3N4/SiC nanocomposite using a commercial polymer. Journal of Alloys and Compounds, 274(1-2), 229-233.

In situ fabrication of Si3N4/SiC nanocomposite using a commercial polymer. / Kim, Chang Sam; Oh, Yoon Suk; Cho, Woo Seok; Lim, Dae-Soon; Cheong, Deock Soo.

In: Journal of Alloys and Compounds, Vol. 274, No. 1-2, 26.06.1998, p. 229-233.

Research output: Contribution to journalArticle

Kim, CS, Oh, YS, Cho, WS, Lim, D-S & Cheong, DS 1998, 'In situ fabrication of Si3N4/SiC nanocomposite using a commercial polymer', Journal of Alloys and Compounds, vol. 274, no. 1-2, pp. 229-233.
Kim, Chang Sam ; Oh, Yoon Suk ; Cho, Woo Seok ; Lim, Dae-Soon ; Cheong, Deock Soo. / In situ fabrication of Si3N4/SiC nanocomposite using a commercial polymer. In: Journal of Alloys and Compounds. 1998 ; Vol. 274, No. 1-2. pp. 229-233.
@article{1a7bcad61ace4438aa86da1dda019fbe,
title = "In situ fabrication of Si3N4/SiC nanocomposite using a commercial polymer",
abstract = "Si3N4/SiC nanocomposite has been prepared using a chemical reaction between Si3N4 powder and phenolic resin as a commercial polymer. The polymer was an effective source that could provide free carbon for fabrication of the nanocomposite. In mixture containing both the Si3N4 powder, which contained some amount of SiO2, and the polymer, SiC nanoparticles were considered to be formed by direct reaction between carbon and Si3N4/SiO2. Sizes of the formed SiC particles were in the range of 10-200 nm. The SiC particles were well dispersed in the matrix.",
keywords = "In situ fabrication, Nanocomposite, Polymer, SiN/SiC",
author = "Kim, {Chang Sam} and Oh, {Yoon Suk} and Cho, {Woo Seok} and Dae-Soon Lim and Cheong, {Deock Soo}",
year = "1998",
month = "6",
day = "26",
language = "English",
volume = "274",
pages = "229--233",
journal = "Journal of Alloys and Compounds",
issn = "0925-8388",
publisher = "Elsevier BV",
number = "1-2",

}

TY - JOUR

T1 - In situ fabrication of Si3N4/SiC nanocomposite using a commercial polymer

AU - Kim, Chang Sam

AU - Oh, Yoon Suk

AU - Cho, Woo Seok

AU - Lim, Dae-Soon

AU - Cheong, Deock Soo

PY - 1998/6/26

Y1 - 1998/6/26

N2 - Si3N4/SiC nanocomposite has been prepared using a chemical reaction between Si3N4 powder and phenolic resin as a commercial polymer. The polymer was an effective source that could provide free carbon for fabrication of the nanocomposite. In mixture containing both the Si3N4 powder, which contained some amount of SiO2, and the polymer, SiC nanoparticles were considered to be formed by direct reaction between carbon and Si3N4/SiO2. Sizes of the formed SiC particles were in the range of 10-200 nm. The SiC particles were well dispersed in the matrix.

AB - Si3N4/SiC nanocomposite has been prepared using a chemical reaction between Si3N4 powder and phenolic resin as a commercial polymer. The polymer was an effective source that could provide free carbon for fabrication of the nanocomposite. In mixture containing both the Si3N4 powder, which contained some amount of SiO2, and the polymer, SiC nanoparticles were considered to be formed by direct reaction between carbon and Si3N4/SiO2. Sizes of the formed SiC particles were in the range of 10-200 nm. The SiC particles were well dispersed in the matrix.

KW - In situ fabrication

KW - Nanocomposite

KW - Polymer

KW - SiN/SiC

UR - http://www.scopus.com/inward/record.url?scp=0032092734&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032092734&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0032092734

VL - 274

SP - 229

EP - 233

JO - Journal of Alloys and Compounds

JF - Journal of Alloys and Compounds

SN - 0925-8388

IS - 1-2

ER -