In vitro evaluation of the bond strength between various ceramics and cobalt-chromium alloy fabricated by selective laser sintering

Eun Jeong Bae, Hae-Young Kim, Woong Chul Kim, Ji Hwan Kim

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens (25.0 × 3.0 × 0.5 mm) were prepared by SLS and fired with the ceramic (8.0 × 3.0 × 0.5 mm) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (α=.05). RESULTS. The mean values of Duceram Kiss (61.18 ± 6.86 MPa), Vita VM13 (60.30 ± 7.14 MPa), Ceramco 3 (58.87 ± 5.33 MPa), Noritake EX-3 (55.86 ± 7.53 MPa), and Vintage MP (55.15 ± 7.53 MPa) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.

Original languageEnglish
Pages (from-to)312-316
Number of pages5
JournalJournal of Advanced Prosthodontics
Volume7
Issue number4
DOIs
Publication statusPublished - 2015

Fingerprint

Chromium Alloys
Ceramics
Lasers
Powders
Hot Temperature
Metals
Analysis of Variance
In Vitro Techniques

Keywords

  • Bond strength
  • Coefficient of thermal expansion
  • Dental technique
  • Rapid prototyping
  • Selective Laser Sintering

ASJC Scopus subject areas

  • Dentistry (miscellaneous)
  • Oral Surgery

Cite this

In vitro evaluation of the bond strength between various ceramics and cobalt-chromium alloy fabricated by selective laser sintering. / Bae, Eun Jeong; Kim, Hae-Young; Kim, Woong Chul; Kim, Ji Hwan.

In: Journal of Advanced Prosthodontics, Vol. 7, No. 4, 2015, p. 312-316.

Research output: Contribution to journalArticle

@article{2aad73c3d6174448966fb284a51fa7bd,
title = "In vitro evaluation of the bond strength between various ceramics and cobalt-chromium alloy fabricated by selective laser sintering",
abstract = "PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens (25.0 × 3.0 × 0.5 mm) were prepared by SLS and fired with the ceramic (8.0 × 3.0 × 0.5 mm) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (α=.05). RESULTS. The mean values of Duceram Kiss (61.18 ± 6.86 MPa), Vita VM13 (60.30 ± 7.14 MPa), Ceramco 3 (58.87 ± 5.33 MPa), Noritake EX-3 (55.86 ± 7.53 MPa), and Vintage MP (55.15 ± 7.53 MPa) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.",
keywords = "Bond strength, Coefficient of thermal expansion, Dental technique, Rapid prototyping, Selective Laser Sintering",
author = "Bae, {Eun Jeong} and Hae-Young Kim and Kim, {Woong Chul} and Kim, {Ji Hwan}",
year = "2015",
doi = "10.4047/jap.2015.7.4.312",
language = "English",
volume = "7",
pages = "312--316",
journal = "Journal of Advanced Prosthodontics",
issn = "2005-7806",
publisher = "The Korean Academy of prosthodontics",
number = "4",

}

TY - JOUR

T1 - In vitro evaluation of the bond strength between various ceramics and cobalt-chromium alloy fabricated by selective laser sintering

AU - Bae, Eun Jeong

AU - Kim, Hae-Young

AU - Kim, Woong Chul

AU - Kim, Ji Hwan

PY - 2015

Y1 - 2015

N2 - PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens (25.0 × 3.0 × 0.5 mm) were prepared by SLS and fired with the ceramic (8.0 × 3.0 × 0.5 mm) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (α=.05). RESULTS. The mean values of Duceram Kiss (61.18 ± 6.86 MPa), Vita VM13 (60.30 ± 7.14 MPa), Ceramco 3 (58.87 ± 5.33 MPa), Noritake EX-3 (55.86 ± 7.53 MPa), and Vintage MP (55.15 ± 7.53 MPa) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.

AB - PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens (25.0 × 3.0 × 0.5 mm) were prepared by SLS and fired with the ceramic (8.0 × 3.0 × 0.5 mm) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (α=.05). RESULTS. The mean values of Duceram Kiss (61.18 ± 6.86 MPa), Vita VM13 (60.30 ± 7.14 MPa), Ceramco 3 (58.87 ± 5.33 MPa), Noritake EX-3 (55.86 ± 7.53 MPa), and Vintage MP (55.15 ± 7.53 MPa) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.

KW - Bond strength

KW - Coefficient of thermal expansion

KW - Dental technique

KW - Rapid prototyping

KW - Selective Laser Sintering

UR - http://www.scopus.com/inward/record.url?scp=84939795147&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84939795147&partnerID=8YFLogxK

U2 - 10.4047/jap.2015.7.4.312

DO - 10.4047/jap.2015.7.4.312

M3 - Article

VL - 7

SP - 312

EP - 316

JO - Journal of Advanced Prosthodontics

JF - Journal of Advanced Prosthodontics

SN - 2005-7806

IS - 4

ER -