Localized deformation in sands and glass beads subjected to plane strain compressions

Li Zhuang, Yukio Nakata, In Mo Lee

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

In order to investigate shear behavior of granular materials due to excavation and associated unloading actions, load-controlled plane strain compression tests under decreasing confining pressure were performed under drained conditions and the results were compared with the conventional plane strain compression tests. Four types of granular material consisting of two quartz sands and two glass beads were used to investigate particle shape effects. It is clarified that macro stress-strain behavior is more easily influenced by stress level and stress path in sands than in glass beads. Development of localized deformation was analyzed using photogrammetry method. It was found that shear bands are generated before peak strength and shear band patterns vary during the whole shearing process. Under the same test condition, shear band thickness in the two sands was smaller than that in one type of glass beads even if the materials have almost the same mean particle size. Shear band thickness also decreased with increase of confining pressure regardless of particle shape or size. Local maximum shear strain inside shear band grew approximately linearly with global axial strain from onset of shear band to the end of softening. The growth rate is found related to shear band thickness. The wider shear band, the relatively lower the growth rate. Finally, observed shear band inclination angles were compared with classical Coulomb and Roscoe solutions and different results were found for sands and glass beads.

Original languageEnglish
Pages (from-to)499-517
Number of pages19
JournalGeomechanics and Engineering
Volume5
Issue number6
DOIs
Publication statusPublished - 2013

Keywords

  • DIC analysis
  • Particle shape
  • Plane strain compression
  • Shear band
  • Stress path
  • Unloading

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Geotechnical Engineering and Engineering Geology

Fingerprint Dive into the research topics of 'Localized deformation in sands and glass beads subjected to plane strain compressions'. Together they form a unique fingerprint.

  • Cite this