Low-resistance Al-based reflectors for high-power GaN-based flip-chip light-emitting diodes

June O. Song, Woong Ki Hong, Y. Park, J. S. Kwak, Tae Yeon Seong

Research output: Contribution to journalArticle

29 Citations (Scopus)

Abstract

We report on the formation of high-quality p -type Al-based ohmic reflectors using Ag (3 nm) indium tin oxide (ITO) (100 nm) interlayers for use in high-power flip-chip light-emitting diodes (LEDs). The AgITO interlayers are first annealed at temperatures of 530 and 630 °C for 1 min in air, after which Al reflectors (200 nm thick) are deposited and subsequently annealed at 330 °C for 5 min in a vacuum. It is shown that the annealed AgITOAl contacts give specific contact resistances as low as ~ 10-5 Ω cm-2 and reflectance of ~85% at a wavelength of 460 nm, which are much better than those of oxidized NiAu schemes. LEDs fabricated with the annealed AgITOAl p -type electrodes give forward-bias voltages of 3.29-3.37 V at injection current of 20 mA.

Original languageEnglish
Article number133503
Pages (from-to)1-3
Number of pages3
JournalApplied Physics Letters
Volume86
Issue number13
DOIs
Publication statusPublished - 2005 Mar 28

ASJC Scopus subject areas

  • Physics and Astronomy (miscellaneous)

Fingerprint Dive into the research topics of 'Low-resistance Al-based reflectors for high-power GaN-based flip-chip light-emitting diodes'. Together they form a unique fingerprint.

  • Cite this