Multislot transmission lines and microwave phase shifters based on (Ba,Sr)TiO3 films

I. G. Mironenko, A. A. Semenov, A. A. Ivanov, P. J. Beljavski, Chong Yun Kang, S. F. Karmanenko

Research output: Contribution to journalArticle

Abstract

Microwave slot and coplanar transmission lines formed on a surface of ferroelectric films grown on dielectric substrates are used for various microwave devices with electrically tunable amplitude and phase frequency characteristics. The electric field intensity, which is required for the effective modulation of dielectric permittivity of the ferroelectric film is varied between 10 and 15 V/micron. Therefore rather narrow gaps with width no more than 10 microns can provide necessary electric field at bias voltage no more than 100 V. In this case the attenuation of the electromagnetic slot mode is considerably increased, so the implementation of such devices has no a sense.

Original languageEnglish
Pages (from-to)58-66
Number of pages9
JournalIntegrated Ferroelectrics
Volume97
Issue number1
DOIs
Publication statusPublished - 2008 Dec 1
Externally publishedYes

Keywords

  • Ferroelectric film
  • Multislot transmission line
  • Phase shifter

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Ceramics and Composites
  • Electronic, Optical and Magnetic Materials
  • Materials Chemistry
  • Condensed Matter Physics
  • Control and Systems Engineering

Fingerprint Dive into the research topics of 'Multislot transmission lines and microwave phase shifters based on (Ba,Sr)TiO3 films'. Together they form a unique fingerprint.

  • Cite this

    Mironenko, I. G., Semenov, A. A., Ivanov, A. A., Beljavski, P. J., Kang, C. Y., & Karmanenko, S. F. (2008). Multislot transmission lines and microwave phase shifters based on (Ba,Sr)TiO3 films. Integrated Ferroelectrics, 97(1), 58-66. https://doi.org/10.1080/10584580802086573