Muscular activity analysis of haptic-based resistance training machine compared with dumbbell training

Gwanhyeong Cha, Kyungnam Kim, Daehie Hong, Woo Jin Chung

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

A haptic-based resistance training machine was developed to incorporate a biomechanical feature for resistance training, offering a customized exercise for each individual user. It can generate a variable resistance profile that is proportional to the maximum strength curve of the user in order to fully stress the agonistic muscle throughout the entire range of motion. In this study, muscular activity was examined with this variable resistance scheme and compared with conventional dumbbell training. Elbow flexion known as biceps curl was selected as a template exercise for clinical evaluation. Thirteen subjects participated in this experiment. The individual strength curve was measured using the haptic-based resistance training machine and the resistance torque exerted upon the elbow joint was analyzed. The muscle activation was obtained through surface electromyography. The pattern of the resistance torque varied between individuals, while that of the dumbbell was fixed regardless of the user. This made a significant difference in the muscle activation. In the mid-section of motion, the haptic-based resistance machine exhibited significantly higher activation than the dumbbell. In the beginning and the end of a repetition, no differences were observed between the machine and the dumbbell. The results indicated that the customized training by the machine stimulated muscle movement more effectively over the range of motion.

Original languageEnglish
Pages (from-to)1209-1213
Number of pages5
JournalInternational Journal of Precision Engineering and Manufacturing
Volume16
Issue number6
DOIs
Publication statusPublished - 2015 Jun 10

Fingerprint

Muscle
Chemical activation
Torque
Electromyography
Experiments

Keywords

  • Biceps curl
  • Elbow flexion
  • EMG
  • Muscle activation
  • Variable resistance training

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Cite this

Muscular activity analysis of haptic-based resistance training machine compared with dumbbell training. / Cha, Gwanhyeong; Kim, Kyungnam; Hong, Daehie; Chung, Woo Jin.

In: International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 6, 10.06.2015, p. 1209-1213.

Research output: Contribution to journalArticle

@article{50a718d0e4f241f2a15942d00362abfb,
title = "Muscular activity analysis of haptic-based resistance training machine compared with dumbbell training",
abstract = "A haptic-based resistance training machine was developed to incorporate a biomechanical feature for resistance training, offering a customized exercise for each individual user. It can generate a variable resistance profile that is proportional to the maximum strength curve of the user in order to fully stress the agonistic muscle throughout the entire range of motion. In this study, muscular activity was examined with this variable resistance scheme and compared with conventional dumbbell training. Elbow flexion known as biceps curl was selected as a template exercise for clinical evaluation. Thirteen subjects participated in this experiment. The individual strength curve was measured using the haptic-based resistance training machine and the resistance torque exerted upon the elbow joint was analyzed. The muscle activation was obtained through surface electromyography. The pattern of the resistance torque varied between individuals, while that of the dumbbell was fixed regardless of the user. This made a significant difference in the muscle activation. In the mid-section of motion, the haptic-based resistance machine exhibited significantly higher activation than the dumbbell. In the beginning and the end of a repetition, no differences were observed between the machine and the dumbbell. The results indicated that the customized training by the machine stimulated muscle movement more effectively over the range of motion.",
keywords = "Biceps curl, Elbow flexion, EMG, Muscle activation, Variable resistance training",
author = "Gwanhyeong Cha and Kyungnam Kim and Daehie Hong and Chung, {Woo Jin}",
year = "2015",
month = "6",
day = "10",
doi = "10.1007/s12541-015-0156-4",
language = "English",
volume = "16",
pages = "1209--1213",
journal = "International Journal of Precision Engineering and Manufacturing",
issn = "1229-8557",
publisher = "Korean Society of Precision Engineering",
number = "6",

}

TY - JOUR

T1 - Muscular activity analysis of haptic-based resistance training machine compared with dumbbell training

AU - Cha, Gwanhyeong

AU - Kim, Kyungnam

AU - Hong, Daehie

AU - Chung, Woo Jin

PY - 2015/6/10

Y1 - 2015/6/10

N2 - A haptic-based resistance training machine was developed to incorporate a biomechanical feature for resistance training, offering a customized exercise for each individual user. It can generate a variable resistance profile that is proportional to the maximum strength curve of the user in order to fully stress the agonistic muscle throughout the entire range of motion. In this study, muscular activity was examined with this variable resistance scheme and compared with conventional dumbbell training. Elbow flexion known as biceps curl was selected as a template exercise for clinical evaluation. Thirteen subjects participated in this experiment. The individual strength curve was measured using the haptic-based resistance training machine and the resistance torque exerted upon the elbow joint was analyzed. The muscle activation was obtained through surface electromyography. The pattern of the resistance torque varied between individuals, while that of the dumbbell was fixed regardless of the user. This made a significant difference in the muscle activation. In the mid-section of motion, the haptic-based resistance machine exhibited significantly higher activation than the dumbbell. In the beginning and the end of a repetition, no differences were observed between the machine and the dumbbell. The results indicated that the customized training by the machine stimulated muscle movement more effectively over the range of motion.

AB - A haptic-based resistance training machine was developed to incorporate a biomechanical feature for resistance training, offering a customized exercise for each individual user. It can generate a variable resistance profile that is proportional to the maximum strength curve of the user in order to fully stress the agonistic muscle throughout the entire range of motion. In this study, muscular activity was examined with this variable resistance scheme and compared with conventional dumbbell training. Elbow flexion known as biceps curl was selected as a template exercise for clinical evaluation. Thirteen subjects participated in this experiment. The individual strength curve was measured using the haptic-based resistance training machine and the resistance torque exerted upon the elbow joint was analyzed. The muscle activation was obtained through surface electromyography. The pattern of the resistance torque varied between individuals, while that of the dumbbell was fixed regardless of the user. This made a significant difference in the muscle activation. In the mid-section of motion, the haptic-based resistance machine exhibited significantly higher activation than the dumbbell. In the beginning and the end of a repetition, no differences were observed between the machine and the dumbbell. The results indicated that the customized training by the machine stimulated muscle movement more effectively over the range of motion.

KW - Biceps curl

KW - Elbow flexion

KW - EMG

KW - Muscle activation

KW - Variable resistance training

UR - http://www.scopus.com/inward/record.url?scp=84930941786&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84930941786&partnerID=8YFLogxK

U2 - 10.1007/s12541-015-0156-4

DO - 10.1007/s12541-015-0156-4

M3 - Article

AN - SCOPUS:84930941786

VL - 16

SP - 1209

EP - 1213

JO - International Journal of Precision Engineering and Manufacturing

JF - International Journal of Precision Engineering and Manufacturing

SN - 1229-8557

IS - 6

ER -