Numerical simulations of particle migration in suspension flows: Frame-invariant formulation of curvature-induced migration

Ju Min Kim, Song Geun Lee, Chongyoup Kim

Research output: Contribution to journalArticle

26 Citations (Scopus)

Abstract

The objective of this work is to investigate what mechanisms should be employed to qualitatively/quantitatively predict particle migration in a suspension flow. Based on the diffusive flux model originally proposed by Phillips et al. [R.J. Phillips, R.C. Armstrong, R.A. Brown, A.L. Graham, A constitutive equation for concentrated suspensions that account for shear-induced particle migration, Phys. Fluids A 4 (1992) 30-40], we survey the accuracy of three models including original Phillips model (Model I), modified Phillips model with curvature-induced migration mechanism (Model II), and finally the modified Model II with volume-fraction-dependent parameters (Model III). The empirical parameters which appear in the three models are determined by fitting to independent concentric Couette experiments. The accuracy of three models in concentric Couette problem is comparable except that Model III shows more improved predictions near the inner cylinder. However, the predictions of the three models are entirely different on a qualitative level for parallel plate problems and the existence and direction of particle migration are severely model-dependent. Models II and III predict no migration or very slight migration at high volume fraction, which is in good agreement with the previous experiments, whereas Model I predicts inward migration. We show that Model III accurately predicts a solid-free region near the center at low volume fraction, which was experimentally observed. In addition to a survey of migration mechanisms, we developed a frame-invariant curvature-induced migration model applicable to multi-dimensional flows. A transient 2D mixed-order finite element method (FEM) code was implemented to compare the predictions of the three models in a 2D problem. In this work, we considered the eccentric Couette problem, which is often used as a benchmarking problem. Though there is not much difference among the three models, Model III predicts that the particle migration is slightly retarded at high shear rate regions.

Original languageEnglish
Pages (from-to)162-176
Number of pages15
JournalJournal of Non-Newtonian Fluid Mechanics
Volume150
Issue number2-3
DOIs
Publication statusPublished - 2008 Apr 14

Fingerprint

Migration
Suspensions
Curvature
curvature
formulations
Numerical Simulation
Invariant
Formulation
Computer simulation
simulation
Model
Predict
Volume Fraction
Volume fraction
Concentric
Prediction
predictions
shear
Dependent
eccentrics

Keywords

  • Curvature-induced migration
  • Diffusive flux model
  • FEM
  • Suspension flows

ASJC Scopus subject areas

  • Fluid Flow and Transfer Processes

Cite this

Numerical simulations of particle migration in suspension flows : Frame-invariant formulation of curvature-induced migration. / Kim, Ju Min; Lee, Song Geun; Kim, Chongyoup.

In: Journal of Non-Newtonian Fluid Mechanics, Vol. 150, No. 2-3, 14.04.2008, p. 162-176.

Research output: Contribution to journalArticle

@article{8114bf33c2a24202bfcff82fc763e014,
title = "Numerical simulations of particle migration in suspension flows: Frame-invariant formulation of curvature-induced migration",
abstract = "The objective of this work is to investigate what mechanisms should be employed to qualitatively/quantitatively predict particle migration in a suspension flow. Based on the diffusive flux model originally proposed by Phillips et al. [R.J. Phillips, R.C. Armstrong, R.A. Brown, A.L. Graham, A constitutive equation for concentrated suspensions that account for shear-induced particle migration, Phys. Fluids A 4 (1992) 30-40], we survey the accuracy of three models including original Phillips model (Model I), modified Phillips model with curvature-induced migration mechanism (Model II), and finally the modified Model II with volume-fraction-dependent parameters (Model III). The empirical parameters which appear in the three models are determined by fitting to independent concentric Couette experiments. The accuracy of three models in concentric Couette problem is comparable except that Model III shows more improved predictions near the inner cylinder. However, the predictions of the three models are entirely different on a qualitative level for parallel plate problems and the existence and direction of particle migration are severely model-dependent. Models II and III predict no migration or very slight migration at high volume fraction, which is in good agreement with the previous experiments, whereas Model I predicts inward migration. We show that Model III accurately predicts a solid-free region near the center at low volume fraction, which was experimentally observed. In addition to a survey of migration mechanisms, we developed a frame-invariant curvature-induced migration model applicable to multi-dimensional flows. A transient 2D mixed-order finite element method (FEM) code was implemented to compare the predictions of the three models in a 2D problem. In this work, we considered the eccentric Couette problem, which is often used as a benchmarking problem. Though there is not much difference among the three models, Model III predicts that the particle migration is slightly retarded at high shear rate regions.",
keywords = "Curvature-induced migration, Diffusive flux model, FEM, Suspension flows",
author = "Kim, {Ju Min} and Lee, {Song Geun} and Chongyoup Kim",
year = "2008",
month = "4",
day = "14",
doi = "10.1016/j.jnnfm.2007.10.012",
language = "English",
volume = "150",
pages = "162--176",
journal = "Journal of Non-Newtonian Fluid Mechanics",
issn = "0377-0257",
publisher = "Elsevier",
number = "2-3",

}

TY - JOUR

T1 - Numerical simulations of particle migration in suspension flows

T2 - Frame-invariant formulation of curvature-induced migration

AU - Kim, Ju Min

AU - Lee, Song Geun

AU - Kim, Chongyoup

PY - 2008/4/14

Y1 - 2008/4/14

N2 - The objective of this work is to investigate what mechanisms should be employed to qualitatively/quantitatively predict particle migration in a suspension flow. Based on the diffusive flux model originally proposed by Phillips et al. [R.J. Phillips, R.C. Armstrong, R.A. Brown, A.L. Graham, A constitutive equation for concentrated suspensions that account for shear-induced particle migration, Phys. Fluids A 4 (1992) 30-40], we survey the accuracy of three models including original Phillips model (Model I), modified Phillips model with curvature-induced migration mechanism (Model II), and finally the modified Model II with volume-fraction-dependent parameters (Model III). The empirical parameters which appear in the three models are determined by fitting to independent concentric Couette experiments. The accuracy of three models in concentric Couette problem is comparable except that Model III shows more improved predictions near the inner cylinder. However, the predictions of the three models are entirely different on a qualitative level for parallel plate problems and the existence and direction of particle migration are severely model-dependent. Models II and III predict no migration or very slight migration at high volume fraction, which is in good agreement with the previous experiments, whereas Model I predicts inward migration. We show that Model III accurately predicts a solid-free region near the center at low volume fraction, which was experimentally observed. In addition to a survey of migration mechanisms, we developed a frame-invariant curvature-induced migration model applicable to multi-dimensional flows. A transient 2D mixed-order finite element method (FEM) code was implemented to compare the predictions of the three models in a 2D problem. In this work, we considered the eccentric Couette problem, which is often used as a benchmarking problem. Though there is not much difference among the three models, Model III predicts that the particle migration is slightly retarded at high shear rate regions.

AB - The objective of this work is to investigate what mechanisms should be employed to qualitatively/quantitatively predict particle migration in a suspension flow. Based on the diffusive flux model originally proposed by Phillips et al. [R.J. Phillips, R.C. Armstrong, R.A. Brown, A.L. Graham, A constitutive equation for concentrated suspensions that account for shear-induced particle migration, Phys. Fluids A 4 (1992) 30-40], we survey the accuracy of three models including original Phillips model (Model I), modified Phillips model with curvature-induced migration mechanism (Model II), and finally the modified Model II with volume-fraction-dependent parameters (Model III). The empirical parameters which appear in the three models are determined by fitting to independent concentric Couette experiments. The accuracy of three models in concentric Couette problem is comparable except that Model III shows more improved predictions near the inner cylinder. However, the predictions of the three models are entirely different on a qualitative level for parallel plate problems and the existence and direction of particle migration are severely model-dependent. Models II and III predict no migration or very slight migration at high volume fraction, which is in good agreement with the previous experiments, whereas Model I predicts inward migration. We show that Model III accurately predicts a solid-free region near the center at low volume fraction, which was experimentally observed. In addition to a survey of migration mechanisms, we developed a frame-invariant curvature-induced migration model applicable to multi-dimensional flows. A transient 2D mixed-order finite element method (FEM) code was implemented to compare the predictions of the three models in a 2D problem. In this work, we considered the eccentric Couette problem, which is often used as a benchmarking problem. Though there is not much difference among the three models, Model III predicts that the particle migration is slightly retarded at high shear rate regions.

KW - Curvature-induced migration

KW - Diffusive flux model

KW - FEM

KW - Suspension flows

UR - http://www.scopus.com/inward/record.url?scp=40849111709&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=40849111709&partnerID=8YFLogxK

U2 - 10.1016/j.jnnfm.2007.10.012

DO - 10.1016/j.jnnfm.2007.10.012

M3 - Article

AN - SCOPUS:40849111709

VL - 150

SP - 162

EP - 176

JO - Journal of Non-Newtonian Fluid Mechanics

JF - Journal of Non-Newtonian Fluid Mechanics

SN - 0377-0257

IS - 2-3

ER -