On determination of model parameters for strain based ductile tearing simulation

Eui Kyun Park, Jin Ha Hwang, Yun Jae Kim, Poh Sang Lam

Research output: Contribution to journalArticlepeer-review

Abstract

This technical note presents the effect of two options to determine model parameters of a strain-based damage model on ductile tearing simulation. Notched bar tensile test data are used to determine the parameters in the first option, whereas only smooth bar tensile data are needed in the second one. In this investigation, four material data are considered. By comparing the simulation results with experimental data, it can be shown that it is difficult to simulate both crack initiation and crack growth well using the first option. However, with the second option, good agreement can be achieved in the prediction of both crack initiation and crack growth in all cases. A possible reason for overestimating crack growth using the first option is discussed.

Original languageEnglish
Article number108698
JournalEngineering Fracture Mechanics
Volume272
DOIs
Publication statusPublished - 2022 Sep

Keywords

  • Damage model parameter determination
  • Notched bar test
  • Strain based ductile tearing simulation model

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'On determination of model parameters for strain based ductile tearing simulation'. Together they form a unique fingerprint.

Cite this