Pattern formation in drying of particle-laden sessile drops of polymer solutions on solid substrates

Yongjoon Choi, Jeongin Han, Chongyoup Kim

Research output: Contribution to journalArticle

17 Citations (Scopus)

Abstract

The drying of particle-laden sessile drops of water or polymer solutions was investigated experimentally. The contact angle of water on the solid surface was 45°. Particles used in the experiment were polystyrene particles of 1 and 6 μm and hollow glass spheres of 9-13 μm. As the polymers polyethylene oxide of 200 and 900 kDa and xanthan gum were used. Depending on particle size and fluid viscosity, the drying pattern varied and there was a competition of the inward movement due to the capillary and/or buoyant force acting on the particles trapped at the liquid interface and the outward movement due to the Deegan flow. The typical 'coffee ring' of colloidal particles was not always observed. Either inward or outward motion was observed depending on low shear viscosity. Elasticity does not appear to change the Deegan flow qualitatively. However, elasticity appears to change the pinning characteristics of the contact line.

Original languageEnglish
Pages (from-to)2130-2136
Number of pages7
JournalKorean Journal of Chemical Engineering
Volume28
Issue number11
DOIs
Publication statusPublished - 2011 Nov 1

Fingerprint

Polymer solutions
Elasticity
Drying
Xanthan gum
Coffee
Shear viscosity
Water
Polystyrenes
Substrates
Polyethylene oxides
Contact angle
Polymers
Particle size
Viscosity
Glass
Fluids
Liquids
Experiments
xanthan gum

Keywords

  • Capillary Force
  • Coffee Ring
  • Contact Line Pinning
  • Deegan Flow
  • Low Shear Viscosity

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)

Cite this

Pattern formation in drying of particle-laden sessile drops of polymer solutions on solid substrates. / Choi, Yongjoon; Han, Jeongin; Kim, Chongyoup.

In: Korean Journal of Chemical Engineering, Vol. 28, No. 11, 01.11.2011, p. 2130-2136.

Research output: Contribution to journalArticle

@article{b60cea0654694c7697e04e9023300d20,
title = "Pattern formation in drying of particle-laden sessile drops of polymer solutions on solid substrates",
abstract = "The drying of particle-laden sessile drops of water or polymer solutions was investigated experimentally. The contact angle of water on the solid surface was 45°. Particles used in the experiment were polystyrene particles of 1 and 6 μm and hollow glass spheres of 9-13 μm. As the polymers polyethylene oxide of 200 and 900 kDa and xanthan gum were used. Depending on particle size and fluid viscosity, the drying pattern varied and there was a competition of the inward movement due to the capillary and/or buoyant force acting on the particles trapped at the liquid interface and the outward movement due to the Deegan flow. The typical 'coffee ring' of colloidal particles was not always observed. Either inward or outward motion was observed depending on low shear viscosity. Elasticity does not appear to change the Deegan flow qualitatively. However, elasticity appears to change the pinning characteristics of the contact line.",
keywords = "Capillary Force, Coffee Ring, Contact Line Pinning, Deegan Flow, Low Shear Viscosity",
author = "Yongjoon Choi and Jeongin Han and Chongyoup Kim",
year = "2011",
month = "11",
day = "1",
doi = "10.1007/s11814-011-0084-7",
language = "English",
volume = "28",
pages = "2130--2136",
journal = "Korean Journal of Chemical Engineering",
issn = "0256-1115",
publisher = "Springer New York",
number = "11",

}

TY - JOUR

T1 - Pattern formation in drying of particle-laden sessile drops of polymer solutions on solid substrates

AU - Choi, Yongjoon

AU - Han, Jeongin

AU - Kim, Chongyoup

PY - 2011/11/1

Y1 - 2011/11/1

N2 - The drying of particle-laden sessile drops of water or polymer solutions was investigated experimentally. The contact angle of water on the solid surface was 45°. Particles used in the experiment were polystyrene particles of 1 and 6 μm and hollow glass spheres of 9-13 μm. As the polymers polyethylene oxide of 200 and 900 kDa and xanthan gum were used. Depending on particle size and fluid viscosity, the drying pattern varied and there was a competition of the inward movement due to the capillary and/or buoyant force acting on the particles trapped at the liquid interface and the outward movement due to the Deegan flow. The typical 'coffee ring' of colloidal particles was not always observed. Either inward or outward motion was observed depending on low shear viscosity. Elasticity does not appear to change the Deegan flow qualitatively. However, elasticity appears to change the pinning characteristics of the contact line.

AB - The drying of particle-laden sessile drops of water or polymer solutions was investigated experimentally. The contact angle of water on the solid surface was 45°. Particles used in the experiment were polystyrene particles of 1 and 6 μm and hollow glass spheres of 9-13 μm. As the polymers polyethylene oxide of 200 and 900 kDa and xanthan gum were used. Depending on particle size and fluid viscosity, the drying pattern varied and there was a competition of the inward movement due to the capillary and/or buoyant force acting on the particles trapped at the liquid interface and the outward movement due to the Deegan flow. The typical 'coffee ring' of colloidal particles was not always observed. Either inward or outward motion was observed depending on low shear viscosity. Elasticity does not appear to change the Deegan flow qualitatively. However, elasticity appears to change the pinning characteristics of the contact line.

KW - Capillary Force

KW - Coffee Ring

KW - Contact Line Pinning

KW - Deegan Flow

KW - Low Shear Viscosity

UR - http://www.scopus.com/inward/record.url?scp=80955158799&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80955158799&partnerID=8YFLogxK

U2 - 10.1007/s11814-011-0084-7

DO - 10.1007/s11814-011-0084-7

M3 - Article

AN - SCOPUS:80955158799

VL - 28

SP - 2130

EP - 2136

JO - Korean Journal of Chemical Engineering

JF - Korean Journal of Chemical Engineering

SN - 0256-1115

IS - 11

ER -