Performance of LiCoO2-coated NiO cathode under pressurized conditions

Jonghee Han, Seung Goo Kim, Sung Pil Yoon, SukWoo Nam, Tae Hoon Lim, In Hwan Oh, Seong Ahn Hong, Hee Chun Lim

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

The properties of LiCoO2-coated NiO cathodes prepared by the solution impregnation technique were investigated. The electrode performance of the LiCoO2-coated cathodes were comparable with that of the conventional NiO cathode at 1, 3, and 5atm and the prepared cathodes showed no performance decay at least for the first 1000 h at pressurized conditions. The post-analysis revealed that the LiCoO2-coated cathodes were effective in suppressing NiO dissolution up to 51% at 1atm and 50% at 3atm. However, the suppression of the NiO dissolution was found to be much less effective (about 11% of suppression) at 5atm. The number of impregnations applied, in other words, the amount of LiCoO2 incorporated into the NiO cathode seemed to have no significant effect on suppressing the NiO dissolution. The Ni contents in the matrix after the 1000 h operations did not vary with increasing the LiCoO2 amount in the NiO cathodes from 0.25-0.8mol%. In the cell with the co-flow configuration, the highest Ni content in the matrix was found at the gas inlet side and the Ni content in the matrix decreased along the gas flow direction.

Original languageEnglish
Pages (from-to)153-159
Number of pages7
JournalJournal of Power Sources
Volume106
Issue number1-2
DOIs
Publication statusPublished - 2002 Apr 1
Externally publishedYes

Fingerprint

Cathodes
cathodes
dissolving
Dissolution
Impregnation
side inlets
matrices
retarding
gas flow
Flow of gases
Gases
Electrodes
electrodes
decay
configurations
cells
gases

Keywords

  • LiCoO-coated NiO cathodes
  • MCFC
  • Ni dissolution

ASJC Scopus subject areas

  • Electrochemistry
  • Fuel Technology
  • Materials Chemistry
  • Energy (miscellaneous)

Cite this

Han, J., Kim, S. G., Yoon, S. P., Nam, S., Lim, T. H., Oh, I. H., ... Lim, H. C. (2002). Performance of LiCoO2-coated NiO cathode under pressurized conditions. Journal of Power Sources, 106(1-2), 153-159. https://doi.org/10.1016/S0378-7753(01)01047-3

Performance of LiCoO2-coated NiO cathode under pressurized conditions. / Han, Jonghee; Kim, Seung Goo; Yoon, Sung Pil; Nam, SukWoo; Lim, Tae Hoon; Oh, In Hwan; Hong, Seong Ahn; Lim, Hee Chun.

In: Journal of Power Sources, Vol. 106, No. 1-2, 01.04.2002, p. 153-159.

Research output: Contribution to journalArticle

Han, J, Kim, SG, Yoon, SP, Nam, S, Lim, TH, Oh, IH, Hong, SA & Lim, HC 2002, 'Performance of LiCoO2-coated NiO cathode under pressurized conditions', Journal of Power Sources, vol. 106, no. 1-2, pp. 153-159. https://doi.org/10.1016/S0378-7753(01)01047-3
Han, Jonghee ; Kim, Seung Goo ; Yoon, Sung Pil ; Nam, SukWoo ; Lim, Tae Hoon ; Oh, In Hwan ; Hong, Seong Ahn ; Lim, Hee Chun. / Performance of LiCoO2-coated NiO cathode under pressurized conditions. In: Journal of Power Sources. 2002 ; Vol. 106, No. 1-2. pp. 153-159.
@article{b417190c1ece414dac3104aecec8a013,
title = "Performance of LiCoO2-coated NiO cathode under pressurized conditions",
abstract = "The properties of LiCoO2-coated NiO cathodes prepared by the solution impregnation technique were investigated. The electrode performance of the LiCoO2-coated cathodes were comparable with that of the conventional NiO cathode at 1, 3, and 5atm and the prepared cathodes showed no performance decay at least for the first 1000 h at pressurized conditions. The post-analysis revealed that the LiCoO2-coated cathodes were effective in suppressing NiO dissolution up to 51{\%} at 1atm and 50{\%} at 3atm. However, the suppression of the NiO dissolution was found to be much less effective (about 11{\%} of suppression) at 5atm. The number of impregnations applied, in other words, the amount of LiCoO2 incorporated into the NiO cathode seemed to have no significant effect on suppressing the NiO dissolution. The Ni contents in the matrix after the 1000 h operations did not vary with increasing the LiCoO2 amount in the NiO cathodes from 0.25-0.8mol{\%}. In the cell with the co-flow configuration, the highest Ni content in the matrix was found at the gas inlet side and the Ni content in the matrix decreased along the gas flow direction.",
keywords = "LiCoO-coated NiO cathodes, MCFC, Ni dissolution",
author = "Jonghee Han and Kim, {Seung Goo} and Yoon, {Sung Pil} and SukWoo Nam and Lim, {Tae Hoon} and Oh, {In Hwan} and Hong, {Seong Ahn} and Lim, {Hee Chun}",
year = "2002",
month = "4",
day = "1",
doi = "10.1016/S0378-7753(01)01047-3",
language = "English",
volume = "106",
pages = "153--159",
journal = "Journal of Power Sources",
issn = "0378-7753",
publisher = "Elsevier",
number = "1-2",

}

TY - JOUR

T1 - Performance of LiCoO2-coated NiO cathode under pressurized conditions

AU - Han, Jonghee

AU - Kim, Seung Goo

AU - Yoon, Sung Pil

AU - Nam, SukWoo

AU - Lim, Tae Hoon

AU - Oh, In Hwan

AU - Hong, Seong Ahn

AU - Lim, Hee Chun

PY - 2002/4/1

Y1 - 2002/4/1

N2 - The properties of LiCoO2-coated NiO cathodes prepared by the solution impregnation technique were investigated. The electrode performance of the LiCoO2-coated cathodes were comparable with that of the conventional NiO cathode at 1, 3, and 5atm and the prepared cathodes showed no performance decay at least for the first 1000 h at pressurized conditions. The post-analysis revealed that the LiCoO2-coated cathodes were effective in suppressing NiO dissolution up to 51% at 1atm and 50% at 3atm. However, the suppression of the NiO dissolution was found to be much less effective (about 11% of suppression) at 5atm. The number of impregnations applied, in other words, the amount of LiCoO2 incorporated into the NiO cathode seemed to have no significant effect on suppressing the NiO dissolution. The Ni contents in the matrix after the 1000 h operations did not vary with increasing the LiCoO2 amount in the NiO cathodes from 0.25-0.8mol%. In the cell with the co-flow configuration, the highest Ni content in the matrix was found at the gas inlet side and the Ni content in the matrix decreased along the gas flow direction.

AB - The properties of LiCoO2-coated NiO cathodes prepared by the solution impregnation technique were investigated. The electrode performance of the LiCoO2-coated cathodes were comparable with that of the conventional NiO cathode at 1, 3, and 5atm and the prepared cathodes showed no performance decay at least for the first 1000 h at pressurized conditions. The post-analysis revealed that the LiCoO2-coated cathodes were effective in suppressing NiO dissolution up to 51% at 1atm and 50% at 3atm. However, the suppression of the NiO dissolution was found to be much less effective (about 11% of suppression) at 5atm. The number of impregnations applied, in other words, the amount of LiCoO2 incorporated into the NiO cathode seemed to have no significant effect on suppressing the NiO dissolution. The Ni contents in the matrix after the 1000 h operations did not vary with increasing the LiCoO2 amount in the NiO cathodes from 0.25-0.8mol%. In the cell with the co-flow configuration, the highest Ni content in the matrix was found at the gas inlet side and the Ni content in the matrix decreased along the gas flow direction.

KW - LiCoO-coated NiO cathodes

KW - MCFC

KW - Ni dissolution

UR - http://www.scopus.com/inward/record.url?scp=0036534481&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036534481&partnerID=8YFLogxK

U2 - 10.1016/S0378-7753(01)01047-3

DO - 10.1016/S0378-7753(01)01047-3

M3 - Article

AN - SCOPUS:0036534481

VL - 106

SP - 153

EP - 159

JO - Journal of Power Sources

JF - Journal of Power Sources

SN - 0378-7753

IS - 1-2

ER -