Physicochemical Analysis of Two Aged Diesel Particulate Filters Placed at Close Coupled and Under Floor Positions of the Vehicles

Dongyoung Jin, Cha Lee Myung, Jeong hwan Kim, Simsoo Park

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This work investigated the aged diesel particulate filter substrate analysis procedure and ash physicochemical analysis method with various instruments such as CT, XPS, SEM and XRD. The procedure for analyzing two DPFs aged with the same lubricant oil but located in different locations was followed to determine the ash formation mechanism. We analyzed DPFs in their non-destructive state with X-ray computed tomography to determine the form how the ash was deposited, and after decanning the DPF, we verified ash formation with micro X-CT. A scanning electron microscope was used to determine the morphology of the ash and DPF substrates, and the distributions of the components were analyzed using energy dispersive spectroscopy. The ash pellets were used for X-ray photoelectron spectroscopy analysis to determine the percentages of different components, and the crystal structure of the ash powder was determined using a X-ray diffractometer. The result of this study is that the deposition patterns and composition of the ash components differ depending on where the DPF is mounted due to differences in temperature and pressure experienced during aging. Calcium is accounted for the largest percentage of the materials that formed the ash.

Original languageEnglish
Pages (from-to)327-335
Number of pages9
JournalInternational Journal of Automotive Technology
Volume20
Issue number2
DOIs
Publication statusPublished - 2019 Apr 1

Fingerprint

Ashes
X ray photoelectron spectroscopy
X rays
Diffractometers
Substrates

Keywords

  • Ash
  • DPF (Diesel Particulate Filter)
  • EDS (Energy Dispersive Spectroscopy)
  • FE-SEM
  • Lubricant oil
  • PM (Particulate Matter)
  • X-CT (Computed Tomography)
  • X-CT (Computed Tomography)
  • XRD (X-ray Diffractometer)

ASJC Scopus subject areas

  • Automotive Engineering

Cite this

Physicochemical Analysis of Two Aged Diesel Particulate Filters Placed at Close Coupled and Under Floor Positions of the Vehicles. / Jin, Dongyoung; Myung, Cha Lee; Kim, Jeong hwan; Park, Simsoo.

In: International Journal of Automotive Technology, Vol. 20, No. 2, 01.04.2019, p. 327-335.

Research output: Contribution to journalArticle

@article{6152f95ed2434822be6827c8b8ac37c5,
title = "Physicochemical Analysis of Two Aged Diesel Particulate Filters Placed at Close Coupled and Under Floor Positions of the Vehicles",
abstract = "This work investigated the aged diesel particulate filter substrate analysis procedure and ash physicochemical analysis method with various instruments such as CT, XPS, SEM and XRD. The procedure for analyzing two DPFs aged with the same lubricant oil but located in different locations was followed to determine the ash formation mechanism. We analyzed DPFs in their non-destructive state with X-ray computed tomography to determine the form how the ash was deposited, and after decanning the DPF, we verified ash formation with micro X-CT. A scanning electron microscope was used to determine the morphology of the ash and DPF substrates, and the distributions of the components were analyzed using energy dispersive spectroscopy. The ash pellets were used for X-ray photoelectron spectroscopy analysis to determine the percentages of different components, and the crystal structure of the ash powder was determined using a X-ray diffractometer. The result of this study is that the deposition patterns and composition of the ash components differ depending on where the DPF is mounted due to differences in temperature and pressure experienced during aging. Calcium is accounted for the largest percentage of the materials that formed the ash.",
keywords = "Ash, DPF (Diesel Particulate Filter), EDS (Energy Dispersive Spectroscopy), FE-SEM, Lubricant oil, PM (Particulate Matter), X-CT (Computed Tomography), X-CT (Computed Tomography), XRD (X-ray Diffractometer)",
author = "Dongyoung Jin and Myung, {Cha Lee} and Kim, {Jeong hwan} and Simsoo Park",
year = "2019",
month = "4",
day = "1",
doi = "10.1007/s12239-019-0032-9",
language = "English",
volume = "20",
pages = "327--335",
journal = "International Journal of Automotive Technology",
issn = "1229-9138",
publisher = "Korean Society of Automotive Engineers",
number = "2",

}

TY - JOUR

T1 - Physicochemical Analysis of Two Aged Diesel Particulate Filters Placed at Close Coupled and Under Floor Positions of the Vehicles

AU - Jin, Dongyoung

AU - Myung, Cha Lee

AU - Kim, Jeong hwan

AU - Park, Simsoo

PY - 2019/4/1

Y1 - 2019/4/1

N2 - This work investigated the aged diesel particulate filter substrate analysis procedure and ash physicochemical analysis method with various instruments such as CT, XPS, SEM and XRD. The procedure for analyzing two DPFs aged with the same lubricant oil but located in different locations was followed to determine the ash formation mechanism. We analyzed DPFs in their non-destructive state with X-ray computed tomography to determine the form how the ash was deposited, and after decanning the DPF, we verified ash formation with micro X-CT. A scanning electron microscope was used to determine the morphology of the ash and DPF substrates, and the distributions of the components were analyzed using energy dispersive spectroscopy. The ash pellets were used for X-ray photoelectron spectroscopy analysis to determine the percentages of different components, and the crystal structure of the ash powder was determined using a X-ray diffractometer. The result of this study is that the deposition patterns and composition of the ash components differ depending on where the DPF is mounted due to differences in temperature and pressure experienced during aging. Calcium is accounted for the largest percentage of the materials that formed the ash.

AB - This work investigated the aged diesel particulate filter substrate analysis procedure and ash physicochemical analysis method with various instruments such as CT, XPS, SEM and XRD. The procedure for analyzing two DPFs aged with the same lubricant oil but located in different locations was followed to determine the ash formation mechanism. We analyzed DPFs in their non-destructive state with X-ray computed tomography to determine the form how the ash was deposited, and after decanning the DPF, we verified ash formation with micro X-CT. A scanning electron microscope was used to determine the morphology of the ash and DPF substrates, and the distributions of the components were analyzed using energy dispersive spectroscopy. The ash pellets were used for X-ray photoelectron spectroscopy analysis to determine the percentages of different components, and the crystal structure of the ash powder was determined using a X-ray diffractometer. The result of this study is that the deposition patterns and composition of the ash components differ depending on where the DPF is mounted due to differences in temperature and pressure experienced during aging. Calcium is accounted for the largest percentage of the materials that formed the ash.

KW - Ash

KW - DPF (Diesel Particulate Filter)

KW - EDS (Energy Dispersive Spectroscopy)

KW - FE-SEM

KW - Lubricant oil

KW - PM (Particulate Matter)

KW - X-CT (Computed Tomography)

KW - X-CT (Computed Tomography)

KW - XRD (X-ray Diffractometer)

UR - http://www.scopus.com/inward/record.url?scp=85063662393&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85063662393&partnerID=8YFLogxK

U2 - 10.1007/s12239-019-0032-9

DO - 10.1007/s12239-019-0032-9

M3 - Article

AN - SCOPUS:85063662393

VL - 20

SP - 327

EP - 335

JO - International Journal of Automotive Technology

JF - International Journal of Automotive Technology

SN - 1229-9138

IS - 2

ER -