Preparation and properties of poly(aspartic acid)-based hydrogel

Hae Dae Park, Ji Heung Kim, Soo Hyun Kim, Young Ha Kim

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

High molecular weight polysuccinimide (PSI), as a precursor of poly(aspartic acid), was prepared by thermal polycondensation of L-aspartic acid. The molecular weight was high when phosphoric acid was used as a catalyst, and the ratio to monomer was 0.75:1 (phosphoric acid : L-aspartic acid). Attempted solution polymerization in various sulfolane/mesitylene mixtures gave only low molecular weight polymers. By the post polymerization of PSI using DCC as a condensing reagent, the molecular weight of PSI could be increased to some extent. Hydrogels was prepared by crosslinking reaction of PSI with diamine, followed by hydrolysis with NaOH either in water or in DMF solution. As high as 104 g water/g-polymer absorption could be obtained from the hydrogel prepared with 3mol% of hexamethylenediamine.

Original languageEnglish
Pages (from-to)247-254
Number of pages8
JournalPolymer (Korea)
Volume23
Issue number2
Publication statusPublished - 1999

Keywords

  • Degradable
  • Hydrogel
  • Poly(aspartic acid)
  • Polysuccinimide
  • Water soluble

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Polymers and Plastics
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Preparation and properties of poly(aspartic acid)-based hydrogel'. Together they form a unique fingerprint.

  • Cite this

    Park, H. D., Kim, J. H., Kim, S. H., & Kim, Y. H. (1999). Preparation and properties of poly(aspartic acid)-based hydrogel. Polymer (Korea), 23(2), 247-254.