Preparation and waveguiding properties of sol-gel derived lathanum modified lead titanate slab waveguides

Dae Sung Yoon, Junmo Koo, Seong Jin Kim, Byeong Soo Bae, Won Jong Lee, Sang Hee Cho, Kwangsoo No

Research output: Contribution to journalArticle

Abstract

Using sol-gel processing method, thin films of lathanum modified lead titanate (PLT) on Corning 7059 glass were prepared. Differential thermal analysis (DTA/TG) curve of gel powder and infrared spectra (FT-IR) of the films were measured to estimate proper heating schedule. Microstructures of the films were observed using a scanning electron microscope (SEM). The waveguiding properties and the propagation loss were measured using the prism coupling method. Effects of the drying conditions on the refractive indices and the propagation losses of the films were investigated. Experimental results showed that the grain size and the content of residual organics in the film decreased as the drying temperature of the film increased. As the drying temperature increased, the refractive index increased and the propagation loss decreased.

Original languageEnglish
Pages (from-to)141-158
Number of pages18
JournalIntegrated Ferroelectrics
Volume20
Issue number1-4
DOIs
Publication statusPublished - 1998

Keywords

  • PLT thin film
  • Prism coupling
  • Propagation loss
  • Sol-gel
  • Waveguide

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Control and Systems Engineering
  • Ceramics and Composites
  • Condensed Matter Physics
  • Electrical and Electronic Engineering
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Preparation and waveguiding properties of sol-gel derived lathanum modified lead titanate slab waveguides'. Together they form a unique fingerprint.

  • Cite this