Preparation of crystalline ytterbium disilicate environmental barrier coatings using suspension plasma spray

Ho lim Ryu, Sung Min Lee, Yoon Soo Han, Kyun Choi, Gye Seok An, Sahn Nahm, Yoon Suk Oh

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

In high-speed modern industries, high-temperature stability of materials is essential. A promising high-temperature material currently attracting attention is silicon carbide (SiC)-based ceramic matrix composites (CMC). However, a disadvantage of these materials is their reduced lifetime in an oxidizing atmosphere. To overcome this, environmental barrier coating can be employed. In this study, we aimed to fabricate an environmental barrier coating using suspension plasma spray with Yb2Si2O7, which exhibits excellent oxidation resistance and a similar thermal expansion coefficient to SiC. To prepare the crystalline Yb2Si2O7 coating layer, the gas concentration of the plasma spray was adjusted, and then the suspension manufacturing solvent was adjusted and sprayed. The prepared coating samples were analyzed by X-ray diffraction, scanning electron microscope, transmission electron microscopes, and energy dispersive X-ray spectroscopy to determine phase and microstructure changes. Highly crystalline ytterbium disilicate was observed at low plasma enthalpy with no hydrogen and 20% addition of water.

Original languageEnglish
JournalCeramics International
DOIs
Publication statusAccepted/In press - 2018 Jan 1

Fingerprint

Ytterbium
Suspensions
Crystalline materials
Plasmas
Coatings
Silicon carbide
Electron microscopes
Plasma Gases
Ceramic matrix composites
Oxidation resistance
Thermal expansion
Hydrogen
Enthalpy
Scanning
X ray diffraction
Temperature
Microstructure
Water
Gases
Industry

Keywords

  • Ceramic matrix composite
  • Environmental barrier coatings
  • Silicon carbide
  • Suspension plasma spray

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Process Chemistry and Technology
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this

Preparation of crystalline ytterbium disilicate environmental barrier coatings using suspension plasma spray. / Ryu, Ho lim; Lee, Sung Min; Han, Yoon Soo; Choi, Kyun; An, Gye Seok; Nahm, Sahn; Oh, Yoon Suk.

In: Ceramics International, 01.01.2018.

Research output: Contribution to journalArticle

Ryu, Ho lim ; Lee, Sung Min ; Han, Yoon Soo ; Choi, Kyun ; An, Gye Seok ; Nahm, Sahn ; Oh, Yoon Suk. / Preparation of crystalline ytterbium disilicate environmental barrier coatings using suspension plasma spray. In: Ceramics International. 2018.
@article{4556f36809ab429ca6df6ceaef14e86c,
title = "Preparation of crystalline ytterbium disilicate environmental barrier coatings using suspension plasma spray",
abstract = "In high-speed modern industries, high-temperature stability of materials is essential. A promising high-temperature material currently attracting attention is silicon carbide (SiC)-based ceramic matrix composites (CMC). However, a disadvantage of these materials is their reduced lifetime in an oxidizing atmosphere. To overcome this, environmental barrier coating can be employed. In this study, we aimed to fabricate an environmental barrier coating using suspension plasma spray with Yb2Si2O7, which exhibits excellent oxidation resistance and a similar thermal expansion coefficient to SiC. To prepare the crystalline Yb2Si2O7 coating layer, the gas concentration of the plasma spray was adjusted, and then the suspension manufacturing solvent was adjusted and sprayed. The prepared coating samples were analyzed by X-ray diffraction, scanning electron microscope, transmission electron microscopes, and energy dispersive X-ray spectroscopy to determine phase and microstructure changes. Highly crystalline ytterbium disilicate was observed at low plasma enthalpy with no hydrogen and 20{\%} addition of water.",
keywords = "Ceramic matrix composite, Environmental barrier coatings, Silicon carbide, Suspension plasma spray",
author = "Ryu, {Ho lim} and Lee, {Sung Min} and Han, {Yoon Soo} and Kyun Choi and An, {Gye Seok} and Sahn Nahm and Oh, {Yoon Suk}",
year = "2018",
month = "1",
day = "1",
doi = "10.1016/j.ceramint.2018.12.048",
language = "English",
journal = "Ceramics International",
issn = "0272-8842",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Preparation of crystalline ytterbium disilicate environmental barrier coatings using suspension plasma spray

AU - Ryu, Ho lim

AU - Lee, Sung Min

AU - Han, Yoon Soo

AU - Choi, Kyun

AU - An, Gye Seok

AU - Nahm, Sahn

AU - Oh, Yoon Suk

PY - 2018/1/1

Y1 - 2018/1/1

N2 - In high-speed modern industries, high-temperature stability of materials is essential. A promising high-temperature material currently attracting attention is silicon carbide (SiC)-based ceramic matrix composites (CMC). However, a disadvantage of these materials is their reduced lifetime in an oxidizing atmosphere. To overcome this, environmental barrier coating can be employed. In this study, we aimed to fabricate an environmental barrier coating using suspension plasma spray with Yb2Si2O7, which exhibits excellent oxidation resistance and a similar thermal expansion coefficient to SiC. To prepare the crystalline Yb2Si2O7 coating layer, the gas concentration of the plasma spray was adjusted, and then the suspension manufacturing solvent was adjusted and sprayed. The prepared coating samples were analyzed by X-ray diffraction, scanning electron microscope, transmission electron microscopes, and energy dispersive X-ray spectroscopy to determine phase and microstructure changes. Highly crystalline ytterbium disilicate was observed at low plasma enthalpy with no hydrogen and 20% addition of water.

AB - In high-speed modern industries, high-temperature stability of materials is essential. A promising high-temperature material currently attracting attention is silicon carbide (SiC)-based ceramic matrix composites (CMC). However, a disadvantage of these materials is their reduced lifetime in an oxidizing atmosphere. To overcome this, environmental barrier coating can be employed. In this study, we aimed to fabricate an environmental barrier coating using suspension plasma spray with Yb2Si2O7, which exhibits excellent oxidation resistance and a similar thermal expansion coefficient to SiC. To prepare the crystalline Yb2Si2O7 coating layer, the gas concentration of the plasma spray was adjusted, and then the suspension manufacturing solvent was adjusted and sprayed. The prepared coating samples were analyzed by X-ray diffraction, scanning electron microscope, transmission electron microscopes, and energy dispersive X-ray spectroscopy to determine phase and microstructure changes. Highly crystalline ytterbium disilicate was observed at low plasma enthalpy with no hydrogen and 20% addition of water.

KW - Ceramic matrix composite

KW - Environmental barrier coatings

KW - Silicon carbide

KW - Suspension plasma spray

UR - http://www.scopus.com/inward/record.url?scp=85058472684&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85058472684&partnerID=8YFLogxK

U2 - 10.1016/j.ceramint.2018.12.048

DO - 10.1016/j.ceramint.2018.12.048

M3 - Article

AN - SCOPUS:85058472684

JO - Ceramics International

JF - Ceramics International

SN - 0272-8842

ER -