Properties of lithium cobaltate powders prepared by FEAG and ultrasonic spray pyrolysis process

Hee Chan Jang, Seo Hee Ju, Yun Chan Kang

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

LiCoO2 cathode powders were prepared by the two different spray pyrolysis processes. The mean size of the post-treated LiCoO2 powders prepared by the FEAG process was 1.6 μm when the excess amount of lithium component was 10 mol% of the stoichiometric value. The post-treated LiCoO 2 powders obtained by ultrasonic spray pyrolysis were finer than those prepared by the FEAG process. The initial discharge capacities of the LiCoO2 powders prepared by the FEAG process changed from 119 to 156 mAh/g when the excess amounts of lithium component were changed from 3 to 20 mol% of the stoichiometric value. The maximum initial discharge capacity of the LiCoO2 powders prepared by the ultrasonic spray pyroysis was 151 mAh/g obtained from the excess amount of lithium component of 3 mol% of the stoichiometric value.

Original languageEnglish
Pages (from-to)709-712
Number of pages4
JournalJournal of the Ceramic Society of Japan
Volume117
Issue number1365
DOIs
Publication statusPublished - 2009 Jan 1
Externally publishedYes

Fingerprint

Spray pyrolysis
Lithium
Powders
pyrolysis
sprayers
lithium
ultrasonics
Ultrasonics
Cathodes
cathodes

Keywords

  • Cathode material
  • Lithium cobaltate
  • Spray pyrolysis

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemistry(all)
  • Condensed Matter Physics
  • Materials Chemistry

Cite this

Properties of lithium cobaltate powders prepared by FEAG and ultrasonic spray pyrolysis process. / Jang, Hee Chan; Ju, Seo Hee; Kang, Yun Chan.

In: Journal of the Ceramic Society of Japan, Vol. 117, No. 1365, 01.01.2009, p. 709-712.

Research output: Contribution to journalArticle

@article{6fad9aef69b14fc9a5dabfb879e054d2,
title = "Properties of lithium cobaltate powders prepared by FEAG and ultrasonic spray pyrolysis process",
abstract = "LiCoO2 cathode powders were prepared by the two different spray pyrolysis processes. The mean size of the post-treated LiCoO2 powders prepared by the FEAG process was 1.6 μm when the excess amount of lithium component was 10 mol{\%} of the stoichiometric value. The post-treated LiCoO 2 powders obtained by ultrasonic spray pyrolysis were finer than those prepared by the FEAG process. The initial discharge capacities of the LiCoO2 powders prepared by the FEAG process changed from 119 to 156 mAh/g when the excess amounts of lithium component were changed from 3 to 20 mol{\%} of the stoichiometric value. The maximum initial discharge capacity of the LiCoO2 powders prepared by the ultrasonic spray pyroysis was 151 mAh/g obtained from the excess amount of lithium component of 3 mol{\%} of the stoichiometric value.",
keywords = "Cathode material, Lithium cobaltate, Spray pyrolysis",
author = "Jang, {Hee Chan} and Ju, {Seo Hee} and Kang, {Yun Chan}",
year = "2009",
month = "1",
day = "1",
doi = "10.2109/jcersj2.117.709",
language = "English",
volume = "117",
pages = "709--712",
journal = "Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan",
issn = "1882-0743",
publisher = "Ceramic Society of Japan/Nippon Seramikkusu Kyokai",
number = "1365",

}

TY - JOUR

T1 - Properties of lithium cobaltate powders prepared by FEAG and ultrasonic spray pyrolysis process

AU - Jang, Hee Chan

AU - Ju, Seo Hee

AU - Kang, Yun Chan

PY - 2009/1/1

Y1 - 2009/1/1

N2 - LiCoO2 cathode powders were prepared by the two different spray pyrolysis processes. The mean size of the post-treated LiCoO2 powders prepared by the FEAG process was 1.6 μm when the excess amount of lithium component was 10 mol% of the stoichiometric value. The post-treated LiCoO 2 powders obtained by ultrasonic spray pyrolysis were finer than those prepared by the FEAG process. The initial discharge capacities of the LiCoO2 powders prepared by the FEAG process changed from 119 to 156 mAh/g when the excess amounts of lithium component were changed from 3 to 20 mol% of the stoichiometric value. The maximum initial discharge capacity of the LiCoO2 powders prepared by the ultrasonic spray pyroysis was 151 mAh/g obtained from the excess amount of lithium component of 3 mol% of the stoichiometric value.

AB - LiCoO2 cathode powders were prepared by the two different spray pyrolysis processes. The mean size of the post-treated LiCoO2 powders prepared by the FEAG process was 1.6 μm when the excess amount of lithium component was 10 mol% of the stoichiometric value. The post-treated LiCoO 2 powders obtained by ultrasonic spray pyrolysis were finer than those prepared by the FEAG process. The initial discharge capacities of the LiCoO2 powders prepared by the FEAG process changed from 119 to 156 mAh/g when the excess amounts of lithium component were changed from 3 to 20 mol% of the stoichiometric value. The maximum initial discharge capacity of the LiCoO2 powders prepared by the ultrasonic spray pyroysis was 151 mAh/g obtained from the excess amount of lithium component of 3 mol% of the stoichiometric value.

KW - Cathode material

KW - Lithium cobaltate

KW - Spray pyrolysis

UR - http://www.scopus.com/inward/record.url?scp=67649363663&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=67649363663&partnerID=8YFLogxK

U2 - 10.2109/jcersj2.117.709

DO - 10.2109/jcersj2.117.709

M3 - Article

VL - 117

SP - 709

EP - 712

JO - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

JF - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

SN - 1882-0743

IS - 1365

ER -