Pt-polyaniline nanocomposite on boron-doped diamond electrode for amperometic biosensor with low detection limit

Min Jung Song, Jong Hoon Kim, Seung Koo Lee, Jae Hyun Lee, Dae-Soon Lim, Sung Woo Hwang, Dongmok Whang

Research output: Contribution to journalArticle

29 Citations (Scopus)

Abstract

Boron-doped diamond electrodes covered with a nanostructured Pt nanoparticle-polyaniline composite have been fabricated and employed as sensitive amperometric sensors with low detection limit. A highly conductive boron-doped diamond thin film (BDD) was prepared by chemical vapor deposition, and its morphology was characterized by scanning electron microscopy and transmission electron microscopy. The nanostructured composite layer was grown on the BDD electrode by electrochemical deposition of polyaniline and Pt nanoparticles. Glucose oxidase (GOx) was then adsorptively immobilized on the modified BDD electrode. The biosensor displays a large surface area, high catalytic activity of the Pt nanoparticles, efficient electron mediation through the conducting polymer, and low background current of the electrode. The biosensor exhibits an excellent response to glucose, with a broad linear range from 5. 9 μM to 0. 51 mM, a sensitivity of 5. 5 μA·mM-1, a correlation coefficient (R) of 0. 9947, and a detection limit of 0. 10 μM. The apparent Michaelis-Menten constant (KM app) and the maximum current density of the electrode are 4. 1 mM and 0. 021 mA, respectively. This suggests that the immobilized GOx possesses a higher affinity for glucose at the lower KM app, and that the enzymatic reaction rate constitutes the rate-limiting step of the response.

Original languageEnglish
Pages (from-to)249-255
Number of pages7
JournalMicrochimica Acta
Volume171
Issue number3
DOIs
Publication statusPublished - 2010 Dec 1

Fingerprint

Diamond
Boron
Biosensors
Nanocomposites
Electrodes
Glucose Oxidase
Nanoparticles
Amperometric sensors
Glucose
Diamond films
Composite materials
Conducting polymers
Reaction rates
Chemical vapor deposition
Catalyst activity
Current density
polyaniline
Transmission electron microscopy
Thin films
Scanning electron microscopy

Keywords

  • Boron-doped diamond
  • Effective surface area
  • Electrochemical sensor
  • Glucose sensor
  • Polyaniline
  • Pt nanoparticles

ASJC Scopus subject areas

  • Analytical Chemistry

Cite this

Pt-polyaniline nanocomposite on boron-doped diamond electrode for amperometic biosensor with low detection limit. / Song, Min Jung; Kim, Jong Hoon; Lee, Seung Koo; Lee, Jae Hyun; Lim, Dae-Soon; Hwang, Sung Woo; Whang, Dongmok.

In: Microchimica Acta, Vol. 171, No. 3, 01.12.2010, p. 249-255.

Research output: Contribution to journalArticle

Song, Min Jung ; Kim, Jong Hoon ; Lee, Seung Koo ; Lee, Jae Hyun ; Lim, Dae-Soon ; Hwang, Sung Woo ; Whang, Dongmok. / Pt-polyaniline nanocomposite on boron-doped diamond electrode for amperometic biosensor with low detection limit. In: Microchimica Acta. 2010 ; Vol. 171, No. 3. pp. 249-255.
@article{3657c82d2fd248089ea706d1f8a72894,
title = "Pt-polyaniline nanocomposite on boron-doped diamond electrode for amperometic biosensor with low detection limit",
abstract = "Boron-doped diamond electrodes covered with a nanostructured Pt nanoparticle-polyaniline composite have been fabricated and employed as sensitive amperometric sensors with low detection limit. A highly conductive boron-doped diamond thin film (BDD) was prepared by chemical vapor deposition, and its morphology was characterized by scanning electron microscopy and transmission electron microscopy. The nanostructured composite layer was grown on the BDD electrode by electrochemical deposition of polyaniline and Pt nanoparticles. Glucose oxidase (GOx) was then adsorptively immobilized on the modified BDD electrode. The biosensor displays a large surface area, high catalytic activity of the Pt nanoparticles, efficient electron mediation through the conducting polymer, and low background current of the electrode. The biosensor exhibits an excellent response to glucose, with a broad linear range from 5. 9 μM to 0. 51 mM, a sensitivity of 5. 5 μA·mM-1, a correlation coefficient (R) of 0. 9947, and a detection limit of 0. 10 μM. The apparent Michaelis-Menten constant (KM app) and the maximum current density of the electrode are 4. 1 mM and 0. 021 mA, respectively. This suggests that the immobilized GOx possesses a higher affinity for glucose at the lower KM app, and that the enzymatic reaction rate constitutes the rate-limiting step of the response.",
keywords = "Boron-doped diamond, Effective surface area, Electrochemical sensor, Glucose sensor, Polyaniline, Pt nanoparticles",
author = "Song, {Min Jung} and Kim, {Jong Hoon} and Lee, {Seung Koo} and Lee, {Jae Hyun} and Dae-Soon Lim and Hwang, {Sung Woo} and Dongmok Whang",
year = "2010",
month = "12",
day = "1",
doi = "10.1007/s00604-010-0432-z",
language = "English",
volume = "171",
pages = "249--255",
journal = "Mikrochimica Acta",
issn = "0026-3672",
publisher = "Springer Wien",
number = "3",

}

TY - JOUR

T1 - Pt-polyaniline nanocomposite on boron-doped diamond electrode for amperometic biosensor with low detection limit

AU - Song, Min Jung

AU - Kim, Jong Hoon

AU - Lee, Seung Koo

AU - Lee, Jae Hyun

AU - Lim, Dae-Soon

AU - Hwang, Sung Woo

AU - Whang, Dongmok

PY - 2010/12/1

Y1 - 2010/12/1

N2 - Boron-doped diamond electrodes covered with a nanostructured Pt nanoparticle-polyaniline composite have been fabricated and employed as sensitive amperometric sensors with low detection limit. A highly conductive boron-doped diamond thin film (BDD) was prepared by chemical vapor deposition, and its morphology was characterized by scanning electron microscopy and transmission electron microscopy. The nanostructured composite layer was grown on the BDD electrode by electrochemical deposition of polyaniline and Pt nanoparticles. Glucose oxidase (GOx) was then adsorptively immobilized on the modified BDD electrode. The biosensor displays a large surface area, high catalytic activity of the Pt nanoparticles, efficient electron mediation through the conducting polymer, and low background current of the electrode. The biosensor exhibits an excellent response to glucose, with a broad linear range from 5. 9 μM to 0. 51 mM, a sensitivity of 5. 5 μA·mM-1, a correlation coefficient (R) of 0. 9947, and a detection limit of 0. 10 μM. The apparent Michaelis-Menten constant (KM app) and the maximum current density of the electrode are 4. 1 mM and 0. 021 mA, respectively. This suggests that the immobilized GOx possesses a higher affinity for glucose at the lower KM app, and that the enzymatic reaction rate constitutes the rate-limiting step of the response.

AB - Boron-doped diamond electrodes covered with a nanostructured Pt nanoparticle-polyaniline composite have been fabricated and employed as sensitive amperometric sensors with low detection limit. A highly conductive boron-doped diamond thin film (BDD) was prepared by chemical vapor deposition, and its morphology was characterized by scanning electron microscopy and transmission electron microscopy. The nanostructured composite layer was grown on the BDD electrode by electrochemical deposition of polyaniline and Pt nanoparticles. Glucose oxidase (GOx) was then adsorptively immobilized on the modified BDD electrode. The biosensor displays a large surface area, high catalytic activity of the Pt nanoparticles, efficient electron mediation through the conducting polymer, and low background current of the electrode. The biosensor exhibits an excellent response to glucose, with a broad linear range from 5. 9 μM to 0. 51 mM, a sensitivity of 5. 5 μA·mM-1, a correlation coefficient (R) of 0. 9947, and a detection limit of 0. 10 μM. The apparent Michaelis-Menten constant (KM app) and the maximum current density of the electrode are 4. 1 mM and 0. 021 mA, respectively. This suggests that the immobilized GOx possesses a higher affinity for glucose at the lower KM app, and that the enzymatic reaction rate constitutes the rate-limiting step of the response.

KW - Boron-doped diamond

KW - Effective surface area

KW - Electrochemical sensor

KW - Glucose sensor

KW - Polyaniline

KW - Pt nanoparticles

UR - http://www.scopus.com/inward/record.url?scp=78149500406&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78149500406&partnerID=8YFLogxK

U2 - 10.1007/s00604-010-0432-z

DO - 10.1007/s00604-010-0432-z

M3 - Article

AN - SCOPUS:78149500406

VL - 171

SP - 249

EP - 255

JO - Mikrochimica Acta

JF - Mikrochimica Acta

SN - 0026-3672

IS - 3

ER -