Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel

Jaeyeong Park, Minju Kang, Seok S Sohn, Sang Heon Kim, Hyoung Seop Kim, Nack J. Kim, Sunghak Lee

Research output: Contribution to journalArticle

24 Citations (Scopus)

Abstract

As automotive steels require high impact resistance for absorbing impact energy upon vehicle body collision, detailed investigation of dynamic deformation behavior of TWinning Induced Plasticity (TWIP) steels is essentially needed. Here we show a plausible explanation of improving dynamic tensile properties by investigating deformation mechanisms using transmission electron microscopy and electron back-scatter diffraction analyses of interrupted tensile specimens. According to microstructural evolution results, slip mechanisms change from wavy slip to (planar+wavy) slip with increasing strain rate. With respect to twinning, the transition occurs from stacking faults to primary twins with increasing strain under quasi-static loading, while twinning becomes more activated under dynamic loading. Due to favorable effects of increased planar slip and twinning on tensile properties, the TWIP steel shows higher strength and similar ductility under dynamic loading. Our results demonstrate desirable applications of the TWIP steel to automotive steel sheets demanding excellent safety requirement of vehicle body.

Original languageEnglish
Pages (from-to)54-63
Number of pages10
JournalMaterials Science and Engineering A
Volume684
DOIs
Publication statusPublished - 2017 Jan 27
Externally publishedYes

Fingerprint

static deformation
Steel
Microstructural evolution
Twinning
twinning
plastic properties
Plasticity
steels
slip
tensile properties
Tensile properties
vehicles
impact resistance
Impact resistance
high strength steels
Stacking faults
Steel sheet
ductility
High strength steel
crystal defects

Keywords

  • Dynamic tensile test
  • Planar slip
  • Split Hopkinson tensile bar
  • Twinning
  • TWinning Induced Plasticity (TWIP) steel

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel. / Park, Jaeyeong; Kang, Minju; Sohn, Seok S; Kim, Sang Heon; Kim, Hyoung Seop; Kim, Nack J.; Lee, Sunghak.

In: Materials Science and Engineering A, Vol. 684, 27.01.2017, p. 54-63.

Research output: Contribution to journalArticle

Park, Jaeyeong ; Kang, Minju ; Sohn, Seok S ; Kim, Sang Heon ; Kim, Hyoung Seop ; Kim, Nack J. ; Lee, Sunghak. / Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel. In: Materials Science and Engineering A. 2017 ; Vol. 684. pp. 54-63.
@article{12b52c2563c044be994b87482c503fc0,
title = "Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel",
abstract = "As automotive steels require high impact resistance for absorbing impact energy upon vehicle body collision, detailed investigation of dynamic deformation behavior of TWinning Induced Plasticity (TWIP) steels is essentially needed. Here we show a plausible explanation of improving dynamic tensile properties by investigating deformation mechanisms using transmission electron microscopy and electron back-scatter diffraction analyses of interrupted tensile specimens. According to microstructural evolution results, slip mechanisms change from wavy slip to (planar+wavy) slip with increasing strain rate. With respect to twinning, the transition occurs from stacking faults to primary twins with increasing strain under quasi-static loading, while twinning becomes more activated under dynamic loading. Due to favorable effects of increased planar slip and twinning on tensile properties, the TWIP steel shows higher strength and similar ductility under dynamic loading. Our results demonstrate desirable applications of the TWIP steel to automotive steel sheets demanding excellent safety requirement of vehicle body.",
keywords = "Dynamic tensile test, Planar slip, Split Hopkinson tensile bar, Twinning, TWinning Induced Plasticity (TWIP) steel",
author = "Jaeyeong Park and Minju Kang and Sohn, {Seok S} and Kim, {Sang Heon} and Kim, {Hyoung Seop} and Kim, {Nack J.} and Sunghak Lee",
year = "2017",
month = "1",
day = "27",
doi = "10.1016/j.msea.2016.12.037",
language = "English",
volume = "684",
pages = "54--63",
journal = "Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing",
issn = "0921-5093",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel

AU - Park, Jaeyeong

AU - Kang, Minju

AU - Sohn, Seok S

AU - Kim, Sang Heon

AU - Kim, Hyoung Seop

AU - Kim, Nack J.

AU - Lee, Sunghak

PY - 2017/1/27

Y1 - 2017/1/27

N2 - As automotive steels require high impact resistance for absorbing impact energy upon vehicle body collision, detailed investigation of dynamic deformation behavior of TWinning Induced Plasticity (TWIP) steels is essentially needed. Here we show a plausible explanation of improving dynamic tensile properties by investigating deformation mechanisms using transmission electron microscopy and electron back-scatter diffraction analyses of interrupted tensile specimens. According to microstructural evolution results, slip mechanisms change from wavy slip to (planar+wavy) slip with increasing strain rate. With respect to twinning, the transition occurs from stacking faults to primary twins with increasing strain under quasi-static loading, while twinning becomes more activated under dynamic loading. Due to favorable effects of increased planar slip and twinning on tensile properties, the TWIP steel shows higher strength and similar ductility under dynamic loading. Our results demonstrate desirable applications of the TWIP steel to automotive steel sheets demanding excellent safety requirement of vehicle body.

AB - As automotive steels require high impact resistance for absorbing impact energy upon vehicle body collision, detailed investigation of dynamic deformation behavior of TWinning Induced Plasticity (TWIP) steels is essentially needed. Here we show a plausible explanation of improving dynamic tensile properties by investigating deformation mechanisms using transmission electron microscopy and electron back-scatter diffraction analyses of interrupted tensile specimens. According to microstructural evolution results, slip mechanisms change from wavy slip to (planar+wavy) slip with increasing strain rate. With respect to twinning, the transition occurs from stacking faults to primary twins with increasing strain under quasi-static loading, while twinning becomes more activated under dynamic loading. Due to favorable effects of increased planar slip and twinning on tensile properties, the TWIP steel shows higher strength and similar ductility under dynamic loading. Our results demonstrate desirable applications of the TWIP steel to automotive steel sheets demanding excellent safety requirement of vehicle body.

KW - Dynamic tensile test

KW - Planar slip

KW - Split Hopkinson tensile bar

KW - Twinning

KW - TWinning Induced Plasticity (TWIP) steel

UR - http://www.scopus.com/inward/record.url?scp=85003875645&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85003875645&partnerID=8YFLogxK

U2 - 10.1016/j.msea.2016.12.037

DO - 10.1016/j.msea.2016.12.037

M3 - Article

AN - SCOPUS:85003875645

VL - 684

SP - 54

EP - 63

JO - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

JF - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

SN - 0921-5093

ER -