Réduction de l’énergie de pompage de liquide par revêtement de surface nanométrique

Translated title of the contribution: Reduction of liquid pumping power by nanoscale surface coating

Mun Ku Kang, Jae Won Lee, Yong Tae Kang

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

The objective of the present study is to reduce the liquid pumping power by controlling the contact angle of the riser surface with the nanoscale surface treatment. The efficiency of a bubble pump is examined depending on the size of the riser, submersion ratio, gas inlet flow rate, and contact angle variations by nanoscale surface coating between 23.7° and 153.8°. By the nanoscale surface coating, the efficiency is improved by 22.5%, 25%, and 18%, respectively, for the 11 mm, 8 mm, and 5 mm risers compared to the uncoated surface. However, the superhydrophobic surface with a contact angle of 153.8° shows a lower efficiency compared to other surfaces due to the reversed liquid vibration flow. The highest efficiency of the liquid pumping power is obtained at the contact angle of 90.3°. An experimental correlation for the dimensionless volumetric liquid flow rate is developed with an error band of ±20%.

Original languageFrench
Pages (from-to)8-17
Number of pages10
JournalInternational Journal of Refrigeration
Volume71
DOIs
Publication statusPublished - 2016 Nov 1

Fingerprint

Coatings
Contact angle
Liquids
Flow rate
Inlet flow
Surface treatment
Pumps
Gases

Keywords

  • Bubble pump
  • Contact angle
  • Liquid pumping power
  • Nanoscale surface coating
  • Reversed liquid vibration flow
  • Wettability

ASJC Scopus subject areas

  • Building and Construction
  • Mechanical Engineering

Cite this

Réduction de l’énergie de pompage de liquide par revêtement de surface nanométrique. / Kang, Mun Ku; Lee, Jae Won; Kang, Yong Tae.

In: International Journal of Refrigeration, Vol. 71, 01.11.2016, p. 8-17.

Research output: Contribution to journalArticle

@article{986a66a3f1d740068c86f27894e02e46,
title = "R{\'e}duction de l’{\'e}nergie de pompage de liquide par rev{\^e}tement de surface nanom{\'e}trique",
abstract = "The objective of the present study is to reduce the liquid pumping power by controlling the contact angle of the riser surface with the nanoscale surface treatment. The efficiency of a bubble pump is examined depending on the size of the riser, submersion ratio, gas inlet flow rate, and contact angle variations by nanoscale surface coating between 23.7° and 153.8°. By the nanoscale surface coating, the efficiency is improved by 22.5{\%}, 25{\%}, and 18{\%}, respectively, for the 11 mm, 8 mm, and 5 mm risers compared to the uncoated surface. However, the superhydrophobic surface with a contact angle of 153.8° shows a lower efficiency compared to other surfaces due to the reversed liquid vibration flow. The highest efficiency of the liquid pumping power is obtained at the contact angle of 90.3°. An experimental correlation for the dimensionless volumetric liquid flow rate is developed with an error band of ±20{\%}.",
keywords = "Bubble pump, Contact angle, Liquid pumping power, Nanoscale surface coating, Reversed liquid vibration flow, Wettability",
author = "Kang, {Mun Ku} and Lee, {Jae Won} and Kang, {Yong Tae}",
year = "2016",
month = "11",
day = "1",
doi = "10.1016/j.ijrefrig.2016.08.003",
language = "French",
volume = "71",
pages = "8--17",
journal = "International Journal of Refrigeration",
issn = "0140-7007",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Réduction de l’énergie de pompage de liquide par revêtement de surface nanométrique

AU - Kang, Mun Ku

AU - Lee, Jae Won

AU - Kang, Yong Tae

PY - 2016/11/1

Y1 - 2016/11/1

N2 - The objective of the present study is to reduce the liquid pumping power by controlling the contact angle of the riser surface with the nanoscale surface treatment. The efficiency of a bubble pump is examined depending on the size of the riser, submersion ratio, gas inlet flow rate, and contact angle variations by nanoscale surface coating between 23.7° and 153.8°. By the nanoscale surface coating, the efficiency is improved by 22.5%, 25%, and 18%, respectively, for the 11 mm, 8 mm, and 5 mm risers compared to the uncoated surface. However, the superhydrophobic surface with a contact angle of 153.8° shows a lower efficiency compared to other surfaces due to the reversed liquid vibration flow. The highest efficiency of the liquid pumping power is obtained at the contact angle of 90.3°. An experimental correlation for the dimensionless volumetric liquid flow rate is developed with an error band of ±20%.

AB - The objective of the present study is to reduce the liquid pumping power by controlling the contact angle of the riser surface with the nanoscale surface treatment. The efficiency of a bubble pump is examined depending on the size of the riser, submersion ratio, gas inlet flow rate, and contact angle variations by nanoscale surface coating between 23.7° and 153.8°. By the nanoscale surface coating, the efficiency is improved by 22.5%, 25%, and 18%, respectively, for the 11 mm, 8 mm, and 5 mm risers compared to the uncoated surface. However, the superhydrophobic surface with a contact angle of 153.8° shows a lower efficiency compared to other surfaces due to the reversed liquid vibration flow. The highest efficiency of the liquid pumping power is obtained at the contact angle of 90.3°. An experimental correlation for the dimensionless volumetric liquid flow rate is developed with an error band of ±20%.

KW - Bubble pump

KW - Contact angle

KW - Liquid pumping power

KW - Nanoscale surface coating

KW - Reversed liquid vibration flow

KW - Wettability

UR - http://www.scopus.com/inward/record.url?scp=84988310641&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84988310641&partnerID=8YFLogxK

U2 - 10.1016/j.ijrefrig.2016.08.003

DO - 10.1016/j.ijrefrig.2016.08.003

M3 - Article

AN - SCOPUS:84988310641

VL - 71

SP - 8

EP - 17

JO - International Journal of Refrigeration

JF - International Journal of Refrigeration

SN - 0140-7007

ER -