RF CMOS integrated on-chip tunable absorptive bandstop filter using Q-tunable resonators

Byungguk Kim, Jangjoon Lee, Ju Seop Lee, Byunghoo Jung, William J. Chappell

Research output: Contribution to journalArticle

21 Citations (Scopus)

Abstract

A new approach for protecting sensitive receivers through large attenuation and its realization on-chip is presented for the first time. This paper demonstrates the use of absorptive bandstop filters that gives anomalously deep notches for a given quality factor. This approach is used in a fabricated design example to isolate a sensitive wideband LNA from interference in 45-nm SOI complementary metaloxide-semiconductor (CMOS). For reconfigurable RF front-ends, a frequency-agile design is newly developed with Q tunable resonators because an absorptive bandstop filter must balance both intrinsic Q of the resonators and the resonant frequency of the filter. Therefore, the design requires variable resistors, variable capacitors, and intimate coupling of inductors of disparate values. The layout of overlapping inductors on closely spaced metal layers is required for proper absorptive properties. The size of one filter presented in this paper is 310 by 340 μm, making it the smallest absorptive bandstop filter demonstrated so far. Despite using small-size, on-chip low-Q resonators in the bandstop filter design, an attenuation level from 31 to 63 dB and a frequency tuning range from 2.9 to 4.3 GHz are achieved with potential to suppress potential interference or an image frequency signal.

Original languageEnglish
Pages (from-to)1730-1737
Number of pages8
JournalIEEE Transactions on Electron Devices
Volume60
Issue number5
DOIs
Publication statusPublished - 2013 Nov 11

Fingerprint

Notch filters
Resonators
Semiconductor materials
Resistors
Natural frequencies
Capacitors
Tuning
Metals

Keywords

  • Absorptive bandstop filter
  • Bandstop filter
  • Complementary metal-oxide-semiconductor (CMOS)
  • Frequency-agile filter
  • Image rejection
  • Integrated filter
  • Interference rejection
  • On-chip
  • Resonator filter
  • RF receiver front-end

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials

Cite this

RF CMOS integrated on-chip tunable absorptive bandstop filter using Q-tunable resonators. / Kim, Byungguk; Lee, Jangjoon; Lee, Ju Seop; Jung, Byunghoo; Chappell, William J.

In: IEEE Transactions on Electron Devices, Vol. 60, No. 5, 11.11.2013, p. 1730-1737.

Research output: Contribution to journalArticle

Kim, Byungguk ; Lee, Jangjoon ; Lee, Ju Seop ; Jung, Byunghoo ; Chappell, William J. / RF CMOS integrated on-chip tunable absorptive bandstop filter using Q-tunable resonators. In: IEEE Transactions on Electron Devices. 2013 ; Vol. 60, No. 5. pp. 1730-1737.
@article{982d0881d46f4da1b6337ace923f6359,
title = "RF CMOS integrated on-chip tunable absorptive bandstop filter using Q-tunable resonators",
abstract = "A new approach for protecting sensitive receivers through large attenuation and its realization on-chip is presented for the first time. This paper demonstrates the use of absorptive bandstop filters that gives anomalously deep notches for a given quality factor. This approach is used in a fabricated design example to isolate a sensitive wideband LNA from interference in 45-nm SOI complementary metaloxide-semiconductor (CMOS). For reconfigurable RF front-ends, a frequency-agile design is newly developed with Q tunable resonators because an absorptive bandstop filter must balance both intrinsic Q of the resonators and the resonant frequency of the filter. Therefore, the design requires variable resistors, variable capacitors, and intimate coupling of inductors of disparate values. The layout of overlapping inductors on closely spaced metal layers is required for proper absorptive properties. The size of one filter presented in this paper is 310 by 340 μm, making it the smallest absorptive bandstop filter demonstrated so far. Despite using small-size, on-chip low-Q resonators in the bandstop filter design, an attenuation level from 31 to 63 dB and a frequency tuning range from 2.9 to 4.3 GHz are achieved with potential to suppress potential interference or an image frequency signal.",
keywords = "Absorptive bandstop filter, Bandstop filter, Complementary metal-oxide-semiconductor (CMOS), Frequency-agile filter, Image rejection, Integrated filter, Interference rejection, On-chip, Resonator filter, RF receiver front-end",
author = "Byungguk Kim and Jangjoon Lee and Lee, {Ju Seop} and Byunghoo Jung and Chappell, {William J.}",
year = "2013",
month = "11",
day = "11",
doi = "10.1109/TED.2013.2253557",
language = "English",
volume = "60",
pages = "1730--1737",
journal = "IEEE Transactions on Electron Devices",
issn = "0018-9383",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "5",

}

TY - JOUR

T1 - RF CMOS integrated on-chip tunable absorptive bandstop filter using Q-tunable resonators

AU - Kim, Byungguk

AU - Lee, Jangjoon

AU - Lee, Ju Seop

AU - Jung, Byunghoo

AU - Chappell, William J.

PY - 2013/11/11

Y1 - 2013/11/11

N2 - A new approach for protecting sensitive receivers through large attenuation and its realization on-chip is presented for the first time. This paper demonstrates the use of absorptive bandstop filters that gives anomalously deep notches for a given quality factor. This approach is used in a fabricated design example to isolate a sensitive wideband LNA from interference in 45-nm SOI complementary metaloxide-semiconductor (CMOS). For reconfigurable RF front-ends, a frequency-agile design is newly developed with Q tunable resonators because an absorptive bandstop filter must balance both intrinsic Q of the resonators and the resonant frequency of the filter. Therefore, the design requires variable resistors, variable capacitors, and intimate coupling of inductors of disparate values. The layout of overlapping inductors on closely spaced metal layers is required for proper absorptive properties. The size of one filter presented in this paper is 310 by 340 μm, making it the smallest absorptive bandstop filter demonstrated so far. Despite using small-size, on-chip low-Q resonators in the bandstop filter design, an attenuation level from 31 to 63 dB and a frequency tuning range from 2.9 to 4.3 GHz are achieved with potential to suppress potential interference or an image frequency signal.

AB - A new approach for protecting sensitive receivers through large attenuation and its realization on-chip is presented for the first time. This paper demonstrates the use of absorptive bandstop filters that gives anomalously deep notches for a given quality factor. This approach is used in a fabricated design example to isolate a sensitive wideband LNA from interference in 45-nm SOI complementary metaloxide-semiconductor (CMOS). For reconfigurable RF front-ends, a frequency-agile design is newly developed with Q tunable resonators because an absorptive bandstop filter must balance both intrinsic Q of the resonators and the resonant frequency of the filter. Therefore, the design requires variable resistors, variable capacitors, and intimate coupling of inductors of disparate values. The layout of overlapping inductors on closely spaced metal layers is required for proper absorptive properties. The size of one filter presented in this paper is 310 by 340 μm, making it the smallest absorptive bandstop filter demonstrated so far. Despite using small-size, on-chip low-Q resonators in the bandstop filter design, an attenuation level from 31 to 63 dB and a frequency tuning range from 2.9 to 4.3 GHz are achieved with potential to suppress potential interference or an image frequency signal.

KW - Absorptive bandstop filter

KW - Bandstop filter

KW - Complementary metal-oxide-semiconductor (CMOS)

KW - Frequency-agile filter

KW - Image rejection

KW - Integrated filter

KW - Interference rejection

KW - On-chip

KW - Resonator filter

KW - RF receiver front-end

UR - http://www.scopus.com/inward/record.url?scp=84885459357&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84885459357&partnerID=8YFLogxK

U2 - 10.1109/TED.2013.2253557

DO - 10.1109/TED.2013.2253557

M3 - Article

AN - SCOPUS:84885459357

VL - 60

SP - 1730

EP - 1737

JO - IEEE Transactions on Electron Devices

JF - IEEE Transactions on Electron Devices

SN - 0018-9383

IS - 5

ER -