Seismic performance of a 3-story RC frame in a low-seismicity region

Han Seon Lee, Sung Woo Woo

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

The objectives of the research stated herein are to investigate the seismic performance of a 3-story reinforced concrete (RC) ordinary moment-resisting frame, which has not been engineered to resist earthquake excitations, and to evaluate the reliability of the available static and dynamic inelastic analysis techniques. A 1:5 scale model constructed according to the Korean practice of nonseismic detailing and the similitude law was subjected to a series of the shaking table motions simulating Taft N21E component earthquake ground accelerogram. Due to the limitation in the capacity of the used shaking table, a pushover test was performed to observe the ultimate capacity of the structure after earthquake simulation tests. The model showed the linear elastic behavior under the Taft N21E motion with the peak ground acceleration of 0.12g, representing the design earthquake in Korea. The model revealed fairly good resistance to the higher levels of earthquake simulation tests though it was not designed against earthquakes. The main components of its resistance to the high level of earthquakes appear to be (1) the high overstrength, (2) the elongation of the fundamental period, (3) the minor energy dissipation by inelastic deformations, and (4) the increase of the damping ratio. The drifts of the model under these tests were approximately within the allowable limit. Analysis of the results of the pushover test reveals that the model structure has the overall displacement ductility ratio of 2.4 and the overstrength coefficient of approximately 8.7. The evaluation of the accuracy of analytical simulation by IDARC-2D leads to the conclusion that while global and local behaviors can be, in general, simulated with limited accuracy in the dynamic nonlinear analysis, it is easy to obtain a fairly high level of accuracy in the prediction of global behavior in the static nonlinear analysis.

Original languageEnglish
Pages (from-to)719-734
Number of pages16
JournalEngineering Structures
Volume24
Issue number6
DOIs
Publication statusPublished - 2002 Jun 1

Fingerprint

Reinforced concrete
Earthquakes
Nonlinear analysis
Model structures
Ductility
Elongation
Energy dissipation
Damping

Keywords

  • Earthquake simulation test
  • Nonlinear analysis
  • Nonseismic detailing
  • Overstrength
  • Pushover test
  • Reinforced concrete

ASJC Scopus subject areas

  • Civil and Structural Engineering

Cite this

Seismic performance of a 3-story RC frame in a low-seismicity region. / Lee, Han Seon; Woo, Sung Woo.

In: Engineering Structures, Vol. 24, No. 6, 01.06.2002, p. 719-734.

Research output: Contribution to journalArticle

@article{9f8fda8825984cdc82a0c5ba6d2bc34a,
title = "Seismic performance of a 3-story RC frame in a low-seismicity region",
abstract = "The objectives of the research stated herein are to investigate the seismic performance of a 3-story reinforced concrete (RC) ordinary moment-resisting frame, which has not been engineered to resist earthquake excitations, and to evaluate the reliability of the available static and dynamic inelastic analysis techniques. A 1:5 scale model constructed according to the Korean practice of nonseismic detailing and the similitude law was subjected to a series of the shaking table motions simulating Taft N21E component earthquake ground accelerogram. Due to the limitation in the capacity of the used shaking table, a pushover test was performed to observe the ultimate capacity of the structure after earthquake simulation tests. The model showed the linear elastic behavior under the Taft N21E motion with the peak ground acceleration of 0.12g, representing the design earthquake in Korea. The model revealed fairly good resistance to the higher levels of earthquake simulation tests though it was not designed against earthquakes. The main components of its resistance to the high level of earthquakes appear to be (1) the high overstrength, (2) the elongation of the fundamental period, (3) the minor energy dissipation by inelastic deformations, and (4) the increase of the damping ratio. The drifts of the model under these tests were approximately within the allowable limit. Analysis of the results of the pushover test reveals that the model structure has the overall displacement ductility ratio of 2.4 and the overstrength coefficient of approximately 8.7. The evaluation of the accuracy of analytical simulation by IDARC-2D leads to the conclusion that while global and local behaviors can be, in general, simulated with limited accuracy in the dynamic nonlinear analysis, it is easy to obtain a fairly high level of accuracy in the prediction of global behavior in the static nonlinear analysis.",
keywords = "Earthquake simulation test, Nonlinear analysis, Nonseismic detailing, Overstrength, Pushover test, Reinforced concrete",
author = "Lee, {Han Seon} and Woo, {Sung Woo}",
year = "2002",
month = "6",
day = "1",
doi = "10.1016/S0141-0296(01)00135-3",
language = "English",
volume = "24",
pages = "719--734",
journal = "Engineering Structures",
issn = "0141-0296",
publisher = "Elsevier BV",
number = "6",

}

TY - JOUR

T1 - Seismic performance of a 3-story RC frame in a low-seismicity region

AU - Lee, Han Seon

AU - Woo, Sung Woo

PY - 2002/6/1

Y1 - 2002/6/1

N2 - The objectives of the research stated herein are to investigate the seismic performance of a 3-story reinforced concrete (RC) ordinary moment-resisting frame, which has not been engineered to resist earthquake excitations, and to evaluate the reliability of the available static and dynamic inelastic analysis techniques. A 1:5 scale model constructed according to the Korean practice of nonseismic detailing and the similitude law was subjected to a series of the shaking table motions simulating Taft N21E component earthquake ground accelerogram. Due to the limitation in the capacity of the used shaking table, a pushover test was performed to observe the ultimate capacity of the structure after earthquake simulation tests. The model showed the linear elastic behavior under the Taft N21E motion with the peak ground acceleration of 0.12g, representing the design earthquake in Korea. The model revealed fairly good resistance to the higher levels of earthquake simulation tests though it was not designed against earthquakes. The main components of its resistance to the high level of earthquakes appear to be (1) the high overstrength, (2) the elongation of the fundamental period, (3) the minor energy dissipation by inelastic deformations, and (4) the increase of the damping ratio. The drifts of the model under these tests were approximately within the allowable limit. Analysis of the results of the pushover test reveals that the model structure has the overall displacement ductility ratio of 2.4 and the overstrength coefficient of approximately 8.7. The evaluation of the accuracy of analytical simulation by IDARC-2D leads to the conclusion that while global and local behaviors can be, in general, simulated with limited accuracy in the dynamic nonlinear analysis, it is easy to obtain a fairly high level of accuracy in the prediction of global behavior in the static nonlinear analysis.

AB - The objectives of the research stated herein are to investigate the seismic performance of a 3-story reinforced concrete (RC) ordinary moment-resisting frame, which has not been engineered to resist earthquake excitations, and to evaluate the reliability of the available static and dynamic inelastic analysis techniques. A 1:5 scale model constructed according to the Korean practice of nonseismic detailing and the similitude law was subjected to a series of the shaking table motions simulating Taft N21E component earthquake ground accelerogram. Due to the limitation in the capacity of the used shaking table, a pushover test was performed to observe the ultimate capacity of the structure after earthquake simulation tests. The model showed the linear elastic behavior under the Taft N21E motion with the peak ground acceleration of 0.12g, representing the design earthquake in Korea. The model revealed fairly good resistance to the higher levels of earthquake simulation tests though it was not designed against earthquakes. The main components of its resistance to the high level of earthquakes appear to be (1) the high overstrength, (2) the elongation of the fundamental period, (3) the minor energy dissipation by inelastic deformations, and (4) the increase of the damping ratio. The drifts of the model under these tests were approximately within the allowable limit. Analysis of the results of the pushover test reveals that the model structure has the overall displacement ductility ratio of 2.4 and the overstrength coefficient of approximately 8.7. The evaluation of the accuracy of analytical simulation by IDARC-2D leads to the conclusion that while global and local behaviors can be, in general, simulated with limited accuracy in the dynamic nonlinear analysis, it is easy to obtain a fairly high level of accuracy in the prediction of global behavior in the static nonlinear analysis.

KW - Earthquake simulation test

KW - Nonlinear analysis

KW - Nonseismic detailing

KW - Overstrength

KW - Pushover test

KW - Reinforced concrete

UR - http://www.scopus.com/inward/record.url?scp=0036605721&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036605721&partnerID=8YFLogxK

U2 - 10.1016/S0141-0296(01)00135-3

DO - 10.1016/S0141-0296(01)00135-3

M3 - Article

AN - SCOPUS:0036605721

VL - 24

SP - 719

EP - 734

JO - Engineering Structures

JF - Engineering Structures

SN - 0141-0296

IS - 6

ER -