Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device

T. L. Nguyen, H. Choi, S. J. Ko, M. A. Uddin, B. Walker, S. Yum, J. E. Jeong, M. H. Yun, T. J. Shin, S. Hwang, J. Y. Kim, Han Young Woo

Research output: Contribution to journalArticle

459 Citations (Scopus)

Abstract

We report a series of semi-crystalline, low band gap (LBG) polymers and demonstrate the fabrication of highly efficient polymer solar cells (PSCs) in a thick single-cell architecture. The devices achieve a power conversion efficiency (PCE) of over 7% without any post-treatment (annealing, solvent additive, etc.) and outstanding long-term thermal stability for 200 h at 130 °C. These excellent characteristics are closely related to the molecular structures where intra- and/or intermolecular noncovalent hydrogen bonds and dipole-dipole interactions assure strong interchain interactions without losing solution processability. The semi-crystalline polymers form a well-distributed nano-fibrillar networked morphology with PC70BM with balanced hole and electron mobilities (a h/e mobility ratio of 1-2) and tight interchain packing (a π-π stacking distance of 3.57-3.59 Å) in the blend films. Furthermore, the device optimization with a processing additive and methanol treatment improves efficiencies up to 9.39% in a ∼300 nm thick conventional single-cell device structure. The thick active layer in the PPDT2FBT:PC 70BM device attenuates incident light almost completely without damage in the fill factor (0.71-0.73), showing a high short-circuit current density of 15.7-16.3 mA cm-2. Notably, PPDT2FBT showed negligible changes in the carrier mobility even at ∼1 μm film thickness. This journal is

Original languageEnglish
Pages (from-to)3040-3051
Number of pages12
JournalEnergy and Environmental Science
Volume7
Issue number9
DOIs
Publication statusPublished - 2014 Jan 1
Externally publishedYes

    Fingerprint

ASJC Scopus subject areas

  • Environmental Chemistry
  • Renewable Energy, Sustainability and the Environment
  • Nuclear Energy and Engineering
  • Pollution

Cite this

Nguyen, T. L., Choi, H., Ko, S. J., Uddin, M. A., Walker, B., Yum, S., Jeong, J. E., Yun, M. H., Shin, T. J., Hwang, S., Kim, J. Y., & Woo, H. Y. (2014). Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device. Energy and Environmental Science, 7(9), 3040-3051. https://doi.org/10.1039/c4ee01529k