Shaking Table Tests of a High-Rise RC Bearing-Wall Structure with Bottom Piloti Stories

Han Seon Lee, Dong Woo Ko

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

The severe shortage of available sites in highly developed metropolitan areas in Korea necessitates the construction of high-rise buildings which meet the needs of residence and commercial activity simultaneously. These buildings are constructed, in general, using the bearing-wall system for the upper apartments and the frame system for the lower commercial space. The objective of this study is to investigate the seismic performance of this type of building structure. For this purpose, a 1:12 scale 17-story reinforced concrete model structure was constructed according to the similitude law, in which the upper 15 stories have a bearing-wall system while the lower 2 stories consist of a moment-resisting frame system. This model was then subjected to a series of excitations which simulated the Taft N21E accelerogram, whose peak ground acceleration (PGA) was modified to be 0.11g, 0.22g, 0.3g, 0.4g, 0.6g, and 0.8g, respectively. Test results show that the piloti stories experience the shear and overturning deformation simultaneously and that the axial force in the column due to overturning moment can be reasonably predicted by using the UBC-97 load combination while the shear resistance of the column can vary dramatically with variations of the axial forces.

Original languageEnglish
Pages (from-to)47-54
Number of pages8
JournalJournal of Asian Architecture and Building Engineering
Volume1
Issue number1
DOIs
Publication statusPublished - 2002

Fingerprint

Bearings (structural)
Model structures
Reinforced concrete
building
high-rise building
apartment
Korea
shortage
agglomeration area
Law
Rise
performance
experience

Keywords

  • Bearing-wall structure
  • Piloti stories
  • Reinforced concrete
  • Shaking table tests

ASJC Scopus subject areas

  • Architecture
  • Civil and Structural Engineering
  • Cultural Studies
  • Building and Construction
  • Arts and Humanities (miscellaneous)

Cite this

Shaking Table Tests of a High-Rise RC Bearing-Wall Structure with Bottom Piloti Stories. / Lee, Han Seon; Ko, Dong Woo.

In: Journal of Asian Architecture and Building Engineering, Vol. 1, No. 1, 2002, p. 47-54.

Research output: Contribution to journalArticle

@article{3dbea85a5d794f3a8e62a18a2f889938,
title = "Shaking Table Tests of a High-Rise RC Bearing-Wall Structure with Bottom Piloti Stories",
abstract = "The severe shortage of available sites in highly developed metropolitan areas in Korea necessitates the construction of high-rise buildings which meet the needs of residence and commercial activity simultaneously. These buildings are constructed, in general, using the bearing-wall system for the upper apartments and the frame system for the lower commercial space. The objective of this study is to investigate the seismic performance of this type of building structure. For this purpose, a 1:12 scale 17-story reinforced concrete model structure was constructed according to the similitude law, in which the upper 15 stories have a bearing-wall system while the lower 2 stories consist of a moment-resisting frame system. This model was then subjected to a series of excitations which simulated the Taft N21E accelerogram, whose peak ground acceleration (PGA) was modified to be 0.11g, 0.22g, 0.3g, 0.4g, 0.6g, and 0.8g, respectively. Test results show that the piloti stories experience the shear and overturning deformation simultaneously and that the axial force in the column due to overturning moment can be reasonably predicted by using the UBC-97 load combination while the shear resistance of the column can vary dramatically with variations of the axial forces.",
keywords = "Bearing-wall structure, Piloti stories, Reinforced concrete, Shaking table tests",
author = "Lee, {Han Seon} and Ko, {Dong Woo}",
year = "2002",
doi = "10.3130/jaabe.1.47",
language = "English",
volume = "1",
pages = "47--54",
journal = "Journal of Asian Architecture and Building Engineering",
issn = "1346-7581",
publisher = "Architectural Institute of Japan",
number = "1",

}

TY - JOUR

T1 - Shaking Table Tests of a High-Rise RC Bearing-Wall Structure with Bottom Piloti Stories

AU - Lee, Han Seon

AU - Ko, Dong Woo

PY - 2002

Y1 - 2002

N2 - The severe shortage of available sites in highly developed metropolitan areas in Korea necessitates the construction of high-rise buildings which meet the needs of residence and commercial activity simultaneously. These buildings are constructed, in general, using the bearing-wall system for the upper apartments and the frame system for the lower commercial space. The objective of this study is to investigate the seismic performance of this type of building structure. For this purpose, a 1:12 scale 17-story reinforced concrete model structure was constructed according to the similitude law, in which the upper 15 stories have a bearing-wall system while the lower 2 stories consist of a moment-resisting frame system. This model was then subjected to a series of excitations which simulated the Taft N21E accelerogram, whose peak ground acceleration (PGA) was modified to be 0.11g, 0.22g, 0.3g, 0.4g, 0.6g, and 0.8g, respectively. Test results show that the piloti stories experience the shear and overturning deformation simultaneously and that the axial force in the column due to overturning moment can be reasonably predicted by using the UBC-97 load combination while the shear resistance of the column can vary dramatically with variations of the axial forces.

AB - The severe shortage of available sites in highly developed metropolitan areas in Korea necessitates the construction of high-rise buildings which meet the needs of residence and commercial activity simultaneously. These buildings are constructed, in general, using the bearing-wall system for the upper apartments and the frame system for the lower commercial space. The objective of this study is to investigate the seismic performance of this type of building structure. For this purpose, a 1:12 scale 17-story reinforced concrete model structure was constructed according to the similitude law, in which the upper 15 stories have a bearing-wall system while the lower 2 stories consist of a moment-resisting frame system. This model was then subjected to a series of excitations which simulated the Taft N21E accelerogram, whose peak ground acceleration (PGA) was modified to be 0.11g, 0.22g, 0.3g, 0.4g, 0.6g, and 0.8g, respectively. Test results show that the piloti stories experience the shear and overturning deformation simultaneously and that the axial force in the column due to overturning moment can be reasonably predicted by using the UBC-97 load combination while the shear resistance of the column can vary dramatically with variations of the axial forces.

KW - Bearing-wall structure

KW - Piloti stories

KW - Reinforced concrete

KW - Shaking table tests

UR - http://www.scopus.com/inward/record.url?scp=85009238821&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85009238821&partnerID=8YFLogxK

U2 - 10.3130/jaabe.1.47

DO - 10.3130/jaabe.1.47

M3 - Article

AN - SCOPUS:85009238821

VL - 1

SP - 47

EP - 54

JO - Journal of Asian Architecture and Building Engineering

JF - Journal of Asian Architecture and Building Engineering

SN - 1346-7581

IS - 1

ER -