SiC-Si composite part fabrication via SiC powder binder jetting additive manufacturing and molten-Si infiltration

Ji Won Oh, Jinsu Park, Sahn Nahm, Hanshin Choi

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)

Abstract

High hardness and superior thermal stability of silicon carbide (SiC) are advantageous for engineering parts but they make it difficult to manufacture complex products with full density. Reaction-bonded SiC are effective solutions for the paradox. SiC-Silicon (Si) composite materials are manufactured by molten Si infiltration through porous SiC and/or Carbon (C) preforms owing to superior wetting of molten Si on SiC and reactive wetting of molten Si on C. Cold isostatic pressing of mixed powders feedstock, green machining and joining are a typical manufacturing pathway for green-body parts. Multiple processes with tools and significant materials loss are regarded as wastes from the viewpoint of lean manufacturing principle. In the present study, feasibility of binder jetting additive manufacturing (BJT AM) technology was assessed for green-body part manufacturing stage in the course of SiC/Si parts production. Adoption of BJT AM showed opportunities for process savings, tool savings, materials savings and design freedom. However, strength of brown-body parts as well as density of as-built green-body parts are challenges. To overcome the limitations, phenolic resin solution impregnation through as-built green parts was introduced. It is highlighted that green-body strength, brown-body strength and infiltrated-body strength are modified with evolutionary phase transformations from cured phenolic resin to reaction-synthesized SiC by way of decomposed carbon through the conventional post-AM densification manufacturing pathway.

Original languageEnglish
Article number105686
JournalInternational Journal of Refractory Metals and Hard Materials
Volume101
DOIs
Publication statusPublished - 2021 Dec
Externally publishedYes

Keywords

  • Binder jetting AM
  • Geometric capability
  • Molten-Si infiltration
  • Phenolic resin impregnation
  • SiC/Si composite

ASJC Scopus subject areas

  • Ceramics and Composites
  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'SiC-Si composite part fabrication via SiC powder binder jetting additive manufacturing and molten-Si infiltration'. Together they form a unique fingerprint.

Cite this