Solid oxide fuel cell with corrugated thin film electrolyte

Pei Chen Su, Cheng Chieh Chao, Joon Hyung Shim, Rainer Fasching, Fritz B. Prinz

Research output: Contribution to journalArticle

285 Citations (Scopus)

Abstract

A low temperature micro solid oxide fuel cell with corrugated electrolyte membrane was developed and tested. To increase the electrochemically active surface area, yttria-stabilized zirconia membranes with thickness of 70 nm were deposited onto prepatterned silicon substrates. Fuel cell performance of the corrugated electrolyte membranes released from silicon substrate showed an increase of power density relative to membranes with planar electrolytes. Maximum power densities of the corrugated fuel cells of 677 mW/cm 2 and 861 mW/cm 2 were obtained at 400 and 450 °C, respectively.

Original languageEnglish
Pages (from-to)2289-2292
Number of pages4
JournalNano Letters
Volume8
Issue number8
DOIs
Publication statusPublished - 2008 Aug

ASJC Scopus subject areas

  • Bioengineering
  • Chemistry(all)
  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Solid oxide fuel cell with corrugated thin film electrolyte'. Together they form a unique fingerprint.

  • Cite this

    Su, P. C., Chao, C. C., Shim, J. H., Fasching, R., & Prinz, F. B. (2008). Solid oxide fuel cell with corrugated thin film electrolyte. Nano Letters, 8(8), 2289-2292. https://doi.org/10.1021/nl800977z