Solid-state amperometric CO2 sensor using a lithium-ion conductor

Ji Sun Lee, Jong Heun Lee, Seong Hyeon Hong

Research output: Contribution to journalArticlepeer-review

15 Citations (Scopus)

Abstract

A solid-state amperometric CO2 sensor was fabricated by combining a Li+-ion conductor (Li2CO3-Li3PO4-Al2O3 ) with a porous layer and a Li2CO3 auxiliary layer deposited on sensing and counter electrodes, respectively. The Li+-ion pumping current increased linearly with increasing CO2 concentration ranging from 200 to 2000 ppm at 400 °C and the 90% response time was approximately 55 s. This sensor was able to reliably detect a small change in the CO2 concentration.

Original languageEnglish
Pages (from-to)311-314
Number of pages4
JournalSensors and Actuators, B: Chemical
Volume89
Issue number3
DOIs
Publication statusPublished - 2003 Apr 1
Externally publishedYes

Keywords

  • Amperometric sensor
  • CO sensor
  • LiCO
  • LiCO-LiPO
  • Solid electrolyte

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Solid-state amperometric CO<sub>2</sub> sensor using a lithium-ion conductor'. Together they form a unique fingerprint.

Cite this