Study on cuo doping effect on 0.69PZT-0.31PZNN for multi-layer piezoelectric energy harvesting system

Daniel Song, Min Sik Woo, Jung Hwan Ahn, Tae Hyun Sung, Kyung Bum Kim, Sahn Nahm

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this study, we have investigated CuO doping effect on PZT-PZNN thick film for lower temperature sintering of multi-layer structure energy harvesting system. We prepared 0.69PZT-0.31PZNN powder, slurry, and green sheet to manufacture thick film ceramics with different doping amount of CuO. Various amount of CuO (0, 1, 2 and 3 mol%) were inserted into piezoelectric material composition of (Zr0.47Ti0.53)O3- 0.31Pb {(Ni0.6Zn0.4)1/3Nb2/3}O3. Laminated thick films with thickness of 0.310 mm were sintered at 900°C. Microstructures were investigated by using SEM and XRD. Also, dielectric property of sintered samples was measured by using d33 meter. As results, dielectric permittivity increases as CuO doping amount increases, which led to decrease in resistance and increase in capacitance value. CuO doping amount of 2 mol % was found to be the optimized point with the highest d33 value. This was explained by SEM images. The SEM images showed the increasing grain size as the CuO doping amount increase, and as the doping amount was 2 mol % or higher, secondary phase was observed in XRD. After measuring and analyzing the CuO doped samples, 2 mol% CuO doped PZT-PZNN thick film was placed on a SUS301 substrate to perform as a unimorph cantilever type energy harvesting system. First, the resonance frequency was observed in 39 Hz with 10.4V. At the resonance frequency, the impedance matching was found at the 2 M Ω, which the output power was calculated as 8 μW. This output power was then calculated as 0.267 mW/cm3.

Original languageEnglish
Title of host publication2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Print)9781479938605
DOIs
Publication statusPublished - 2014 Jan 1
Event2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014 - State College, United States
Duration: 2014 May 122014 May 16

Other

Other2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014
CountryUnited States
CityState College
Period14/5/1214/5/16

Fingerprint

Energy harvesting
Doping (additives)
Thick films
Scanning electron microscopy
Piezoelectric materials
Dielectric properties
Powders
Permittivity
Capacitance
Sintering
Microstructure
Substrates
Chemical analysis

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Cite this

Song, D., Woo, M. S., Ahn, J. H., Sung, T. H., Kim, K. B., & Nahm, S. (2014). Study on cuo doping effect on 0.69PZT-0.31PZNN for multi-layer piezoelectric energy harvesting system. In 2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014 [6923010] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISAF.2014.6923010

Study on cuo doping effect on 0.69PZT-0.31PZNN for multi-layer piezoelectric energy harvesting system. / Song, Daniel; Woo, Min Sik; Ahn, Jung Hwan; Sung, Tae Hyun; Kim, Kyung Bum; Nahm, Sahn.

2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014. Institute of Electrical and Electronics Engineers Inc., 2014. 6923010.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Song, D, Woo, MS, Ahn, JH, Sung, TH, Kim, KB & Nahm, S 2014, Study on cuo doping effect on 0.69PZT-0.31PZNN for multi-layer piezoelectric energy harvesting system. in 2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014., 6923010, Institute of Electrical and Electronics Engineers Inc., 2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014, State College, United States, 14/5/12. https://doi.org/10.1109/ISAF.2014.6923010
Song D, Woo MS, Ahn JH, Sung TH, Kim KB, Nahm S. Study on cuo doping effect on 0.69PZT-0.31PZNN for multi-layer piezoelectric energy harvesting system. In 2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014. Institute of Electrical and Electronics Engineers Inc. 2014. 6923010 https://doi.org/10.1109/ISAF.2014.6923010
Song, Daniel ; Woo, Min Sik ; Ahn, Jung Hwan ; Sung, Tae Hyun ; Kim, Kyung Bum ; Nahm, Sahn. / Study on cuo doping effect on 0.69PZT-0.31PZNN for multi-layer piezoelectric energy harvesting system. 2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014. Institute of Electrical and Electronics Engineers Inc., 2014.
@inproceedings{86d524bed745410a812726992bcc9385,
title = "Study on cuo doping effect on 0.69PZT-0.31PZNN for multi-layer piezoelectric energy harvesting system",
abstract = "In this study, we have investigated CuO doping effect on PZT-PZNN thick film for lower temperature sintering of multi-layer structure energy harvesting system. We prepared 0.69PZT-0.31PZNN powder, slurry, and green sheet to manufacture thick film ceramics with different doping amount of CuO. Various amount of CuO (0, 1, 2 and 3 mol{\%}) were inserted into piezoelectric material composition of (Zr0.47Ti0.53)O3- 0.31Pb {(Ni0.6Zn0.4)1/3Nb2/3}O3. Laminated thick films with thickness of 0.310 mm were sintered at 900°C. Microstructures were investigated by using SEM and XRD. Also, dielectric property of sintered samples was measured by using d33 meter. As results, dielectric permittivity increases as CuO doping amount increases, which led to decrease in resistance and increase in capacitance value. CuO doping amount of 2 mol {\%} was found to be the optimized point with the highest d33 value. This was explained by SEM images. The SEM images showed the increasing grain size as the CuO doping amount increase, and as the doping amount was 2 mol {\%} or higher, secondary phase was observed in XRD. After measuring and analyzing the CuO doped samples, 2 mol{\%} CuO doped PZT-PZNN thick film was placed on a SUS301 substrate to perform as a unimorph cantilever type energy harvesting system. First, the resonance frequency was observed in 39 Hz with 10.4V. At the resonance frequency, the impedance matching was found at the 2 M Ω, which the output power was calculated as 8 μW. This output power was then calculated as 0.267 mW/cm3.",
keywords = "CuO doping, energy harvesting, piezoelectricity, tape casting, thick film",
author = "Daniel Song and Woo, {Min Sik} and Ahn, {Jung Hwan} and Sung, {Tae Hyun} and Kim, {Kyung Bum} and Sahn Nahm",
year = "2014",
month = "1",
day = "1",
doi = "10.1109/ISAF.2014.6923010",
language = "English",
isbn = "9781479938605",
booktitle = "2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Study on cuo doping effect on 0.69PZT-0.31PZNN for multi-layer piezoelectric energy harvesting system

AU - Song, Daniel

AU - Woo, Min Sik

AU - Ahn, Jung Hwan

AU - Sung, Tae Hyun

AU - Kim, Kyung Bum

AU - Nahm, Sahn

PY - 2014/1/1

Y1 - 2014/1/1

N2 - In this study, we have investigated CuO doping effect on PZT-PZNN thick film for lower temperature sintering of multi-layer structure energy harvesting system. We prepared 0.69PZT-0.31PZNN powder, slurry, and green sheet to manufacture thick film ceramics with different doping amount of CuO. Various amount of CuO (0, 1, 2 and 3 mol%) were inserted into piezoelectric material composition of (Zr0.47Ti0.53)O3- 0.31Pb {(Ni0.6Zn0.4)1/3Nb2/3}O3. Laminated thick films with thickness of 0.310 mm were sintered at 900°C. Microstructures were investigated by using SEM and XRD. Also, dielectric property of sintered samples was measured by using d33 meter. As results, dielectric permittivity increases as CuO doping amount increases, which led to decrease in resistance and increase in capacitance value. CuO doping amount of 2 mol % was found to be the optimized point with the highest d33 value. This was explained by SEM images. The SEM images showed the increasing grain size as the CuO doping amount increase, and as the doping amount was 2 mol % or higher, secondary phase was observed in XRD. After measuring and analyzing the CuO doped samples, 2 mol% CuO doped PZT-PZNN thick film was placed on a SUS301 substrate to perform as a unimorph cantilever type energy harvesting system. First, the resonance frequency was observed in 39 Hz with 10.4V. At the resonance frequency, the impedance matching was found at the 2 M Ω, which the output power was calculated as 8 μW. This output power was then calculated as 0.267 mW/cm3.

AB - In this study, we have investigated CuO doping effect on PZT-PZNN thick film for lower temperature sintering of multi-layer structure energy harvesting system. We prepared 0.69PZT-0.31PZNN powder, slurry, and green sheet to manufacture thick film ceramics with different doping amount of CuO. Various amount of CuO (0, 1, 2 and 3 mol%) were inserted into piezoelectric material composition of (Zr0.47Ti0.53)O3- 0.31Pb {(Ni0.6Zn0.4)1/3Nb2/3}O3. Laminated thick films with thickness of 0.310 mm were sintered at 900°C. Microstructures were investigated by using SEM and XRD. Also, dielectric property of sintered samples was measured by using d33 meter. As results, dielectric permittivity increases as CuO doping amount increases, which led to decrease in resistance and increase in capacitance value. CuO doping amount of 2 mol % was found to be the optimized point with the highest d33 value. This was explained by SEM images. The SEM images showed the increasing grain size as the CuO doping amount increase, and as the doping amount was 2 mol % or higher, secondary phase was observed in XRD. After measuring and analyzing the CuO doped samples, 2 mol% CuO doped PZT-PZNN thick film was placed on a SUS301 substrate to perform as a unimorph cantilever type energy harvesting system. First, the resonance frequency was observed in 39 Hz with 10.4V. At the resonance frequency, the impedance matching was found at the 2 M Ω, which the output power was calculated as 8 μW. This output power was then calculated as 0.267 mW/cm3.

KW - CuO doping

KW - energy harvesting

KW - piezoelectricity

KW - tape casting

KW - thick film

UR - http://www.scopus.com/inward/record.url?scp=84910007966&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84910007966&partnerID=8YFLogxK

U2 - 10.1109/ISAF.2014.6923010

DO - 10.1109/ISAF.2014.6923010

M3 - Conference contribution

AN - SCOPUS:84910007966

SN - 9781479938605

BT - 2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014

PB - Institute of Electrical and Electronics Engineers Inc.

ER -