Study on the diamond field emitter fabricated by transfer mold technique

Byeong Kwon Ju, Seong Jin Kim, Jae Hoon Jung, Yun-Hi Lee, Beom Soo Park, Young Joon Baik, Sung Kyoo Lim, Myung Hwan Oh

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Strip shaped diamond-tip field emitter array was fabricated by using the transfer mold technique. The sharp turn-on characteristic was observed from the current-voltage measurement of the fabricated diamond-tip field emitter array. The turn-on characteristic of the diamond-tip field emitter array was compared with that of a flat diamond film. High emission current density was obtained from the diamond-tip field emitter array. The threshold voltage of the diamond-tip field emitter array was lower than that of a flat diamond film.

Original languageEnglish
Title of host publicationMaterials Research Society Symposium - Proceedings
EditorsM.K. Hatalis, J. Kanicki, C.J. Summers, F. Funada
PublisherMaterials Research Society
Pages399-402
Number of pages4
Volume424
Publication statusPublished - 1996
Externally publishedYes
EventProceedings of the 1996 MRS Spring Meeting - San Francisco, CA, USA
Duration: 1996 Apr 81996 Apr 12

Other

OtherProceedings of the 1996 MRS Spring Meeting
CitySan Francisco, CA, USA
Period96/4/896/4/12

    Fingerprint

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials

Cite this

Ju, B. K., Kim, S. J., Jung, J. H., Lee, Y-H., Park, B. S., Baik, Y. J., Lim, S. K., & Oh, M. H. (1996). Study on the diamond field emitter fabricated by transfer mold technique. In M. K. Hatalis, J. Kanicki, C. J. Summers, & F. Funada (Eds.), Materials Research Society Symposium - Proceedings (Vol. 424, pp. 399-402). Materials Research Society.