Coal-based granular activated carbon was modified with acetates of sodium, potassium and lithium at concentrations of 10 and 15% and used as adsorbents to explore the adsorption mechanism of nickel ion in aqueous solution. Acetate treatment reduced surface area and pore volume of the activated carbons, but the adsorption amount of Ni(II) on the modified activated carbons (MAC) was greater than that on the virgin activated carbon. The adsorption depended on pH of the solution with an optimum at 4.5 and the adsorbed nickel could be fully desorbed by using 0.05M HCl solution. The maximum adsorption capacity of nickel ion on Li (15 wt%) modified activated carbon was 151.3 mg/g and the adsorption isotherm follows Langmuir, Sips, and Redlich-Peterson isotherm models better than the Freundlich isotherm model. The kinetic data was better fitted by a non-linear form of the pseudo-first order than the pseudo-second order, but the difference between two kinetic models was small.
|Number of pages||6|
|Journal||Korean Journal of Chemical Engineering|
|Publication status||Published - 2009 Nov|
- Activated Carbon
- Surface Treatment
ASJC Scopus subject areas
- Chemical Engineering(all)