Surface tension of liquid Fe-Ti alloys at 1 823 K

Joonho Lee, Akihito Kiyose, Masayuki Tanaka, Toshihiro Tanaka

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

Surface tension of liquid Fe-Ti alloys has been determined by using the constrained drop method at 1 823 K in Ar-10%H2 gas atmosphere. It was found that the surface tension of liquid Fe-Ti alloy decreases slightly with increasing titanium content. In addition, the surface tension of Fe-Ti alloy was also obtained by a theoretical calculation. It was found that the experimental results became slightly lower than the calculated results with increasing titanium content. This paper also discusses the possible reasons for the slight decrease in the surface tension with increasing the titanium content.

Original languageEnglish
Pages (from-to)467-471
Number of pages5
JournalISIJ International
Volume46
Issue number4
DOIs
Publication statusPublished - 2006 Jun 19

Fingerprint

Surface tension
Titanium
Liquids
Gases

Keywords

  • Constrained drop method
  • Liquid Fe-Ti alloys
  • Surface tension

ASJC Scopus subject areas

  • Metals and Alloys

Cite this

Surface tension of liquid Fe-Ti alloys at 1 823 K. / Lee, Joonho; Kiyose, Akihito; Tanaka, Masayuki; Tanaka, Toshihiro.

In: ISIJ International, Vol. 46, No. 4, 19.06.2006, p. 467-471.

Research output: Contribution to journalArticle

Lee, Joonho ; Kiyose, Akihito ; Tanaka, Masayuki ; Tanaka, Toshihiro. / Surface tension of liquid Fe-Ti alloys at 1 823 K. In: ISIJ International. 2006 ; Vol. 46, No. 4. pp. 467-471.
@article{77a9f76cfaf8455dbc94eb1044fd71e4,
title = "Surface tension of liquid Fe-Ti alloys at 1 823 K",
abstract = "Surface tension of liquid Fe-Ti alloys has been determined by using the constrained drop method at 1 823 K in Ar-10{\%}H2 gas atmosphere. It was found that the surface tension of liquid Fe-Ti alloy decreases slightly with increasing titanium content. In addition, the surface tension of Fe-Ti alloy was also obtained by a theoretical calculation. It was found that the experimental results became slightly lower than the calculated results with increasing titanium content. This paper also discusses the possible reasons for the slight decrease in the surface tension with increasing the titanium content.",
keywords = "Constrained drop method, Liquid Fe-Ti alloys, Surface tension",
author = "Joonho Lee and Akihito Kiyose and Masayuki Tanaka and Toshihiro Tanaka",
year = "2006",
month = "6",
day = "19",
doi = "10.2355/isijinternational.46.467",
language = "English",
volume = "46",
pages = "467--471",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "4",

}

TY - JOUR

T1 - Surface tension of liquid Fe-Ti alloys at 1 823 K

AU - Lee, Joonho

AU - Kiyose, Akihito

AU - Tanaka, Masayuki

AU - Tanaka, Toshihiro

PY - 2006/6/19

Y1 - 2006/6/19

N2 - Surface tension of liquid Fe-Ti alloys has been determined by using the constrained drop method at 1 823 K in Ar-10%H2 gas atmosphere. It was found that the surface tension of liquid Fe-Ti alloy decreases slightly with increasing titanium content. In addition, the surface tension of Fe-Ti alloy was also obtained by a theoretical calculation. It was found that the experimental results became slightly lower than the calculated results with increasing titanium content. This paper also discusses the possible reasons for the slight decrease in the surface tension with increasing the titanium content.

AB - Surface tension of liquid Fe-Ti alloys has been determined by using the constrained drop method at 1 823 K in Ar-10%H2 gas atmosphere. It was found that the surface tension of liquid Fe-Ti alloy decreases slightly with increasing titanium content. In addition, the surface tension of Fe-Ti alloy was also obtained by a theoretical calculation. It was found that the experimental results became slightly lower than the calculated results with increasing titanium content. This paper also discusses the possible reasons for the slight decrease in the surface tension with increasing the titanium content.

KW - Constrained drop method

KW - Liquid Fe-Ti alloys

KW - Surface tension

UR - http://www.scopus.com/inward/record.url?scp=33745010858&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33745010858&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.46.467

DO - 10.2355/isijinternational.46.467

M3 - Article

VL - 46

SP - 467

EP - 471

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 4

ER -