Synthesis and properties of polyurethane/clay nanocomposite by clay modified with polymeric methane diisocyanate

W. J. Seo, Y. T. Sung, S. J. Han, Y. H. Kim, O. H. Ryu, H. S. Lee, Woo Nyon Kim

Research output: Contribution to journalArticle

44 Citations (Scopus)

Abstract

A polyurethane (PU)/clay nanocomposite was synthesized from polyol, polymeric 4,4′-diphenyl methane diisocyanate (PMDI), and modified clay with PMDI. To achieve the modified clay with PMDI, the silanol group of the clay and the NCO group of the PMDI were reacted for 24 h at 50°C to form urethane linkage. Fourier transform IR analysis of the clay modified with the PMDI demonstrated that the NCO characteristic peak was observed in the clay after a modification reaction with PMDI. The results of the X-ray pattern suggested that the clay layers were exfoliated from the PU/clay nanocomposite. From the results of the mechanical properties, the maximum values of the flexural and tensile strength were observed when 3 wt % clay based on PMDI was added into the PU/clay nanocomposites. The glass-transition temperature and change in the heat capacity at glass transition temperature (ΔC p) of the PU/clay nanocomposite decreased with an increase in the modified clay content. We suggested that the decrease in the ΔC p with the modified clay content might be due to the increase of steric hindrance by the exfoliated clay layers.

Original languageEnglish
Pages (from-to)2879-2883
Number of pages5
JournalJournal of Applied Polymer Science
Volume101
Issue number5
DOIs
Publication statusPublished - 2006 Sep 5

Fingerprint

Polyurethanes
Methane
Nanocomposites
Clay
clay
Polyols
Urethane
diphenyl
Bending strength
Specific heat

Keywords

  • Clay
  • Mechanical properties
  • Nanocomposites
  • Polyurethanes
  • Wide-angle X-ray diffraction

ASJC Scopus subject areas

  • Polymers and Plastics

Cite this

Synthesis and properties of polyurethane/clay nanocomposite by clay modified with polymeric methane diisocyanate. / Seo, W. J.; Sung, Y. T.; Han, S. J.; Kim, Y. H.; Ryu, O. H.; Lee, H. S.; Kim, Woo Nyon.

In: Journal of Applied Polymer Science, Vol. 101, No. 5, 05.09.2006, p. 2879-2883.

Research output: Contribution to journalArticle

Seo, W. J. ; Sung, Y. T. ; Han, S. J. ; Kim, Y. H. ; Ryu, O. H. ; Lee, H. S. ; Kim, Woo Nyon. / Synthesis and properties of polyurethane/clay nanocomposite by clay modified with polymeric methane diisocyanate. In: Journal of Applied Polymer Science. 2006 ; Vol. 101, No. 5. pp. 2879-2883.
@article{fdae1e160ac44c5c9c81f6721b04d99d,
title = "Synthesis and properties of polyurethane/clay nanocomposite by clay modified with polymeric methane diisocyanate",
abstract = "A polyurethane (PU)/clay nanocomposite was synthesized from polyol, polymeric 4,4′-diphenyl methane diisocyanate (PMDI), and modified clay with PMDI. To achieve the modified clay with PMDI, the silanol group of the clay and the NCO group of the PMDI were reacted for 24 h at 50°C to form urethane linkage. Fourier transform IR analysis of the clay modified with the PMDI demonstrated that the NCO characteristic peak was observed in the clay after a modification reaction with PMDI. The results of the X-ray pattern suggested that the clay layers were exfoliated from the PU/clay nanocomposite. From the results of the mechanical properties, the maximum values of the flexural and tensile strength were observed when 3 wt {\%} clay based on PMDI was added into the PU/clay nanocomposites. The glass-transition temperature and change in the heat capacity at glass transition temperature (ΔC p) of the PU/clay nanocomposite decreased with an increase in the modified clay content. We suggested that the decrease in the ΔC p with the modified clay content might be due to the increase of steric hindrance by the exfoliated clay layers.",
keywords = "Clay, Mechanical properties, Nanocomposites, Polyurethanes, Wide-angle X-ray diffraction",
author = "Seo, {W. J.} and Sung, {Y. T.} and Han, {S. J.} and Kim, {Y. H.} and Ryu, {O. H.} and Lee, {H. S.} and Kim, {Woo Nyon}",
year = "2006",
month = "9",
day = "5",
doi = "10.1002/app.23357",
language = "English",
volume = "101",
pages = "2879--2883",
journal = "Journal of Applied Polymer Science",
issn = "0021-8995",
publisher = "John Wiley and Sons Inc.",
number = "5",

}

TY - JOUR

T1 - Synthesis and properties of polyurethane/clay nanocomposite by clay modified with polymeric methane diisocyanate

AU - Seo, W. J.

AU - Sung, Y. T.

AU - Han, S. J.

AU - Kim, Y. H.

AU - Ryu, O. H.

AU - Lee, H. S.

AU - Kim, Woo Nyon

PY - 2006/9/5

Y1 - 2006/9/5

N2 - A polyurethane (PU)/clay nanocomposite was synthesized from polyol, polymeric 4,4′-diphenyl methane diisocyanate (PMDI), and modified clay with PMDI. To achieve the modified clay with PMDI, the silanol group of the clay and the NCO group of the PMDI were reacted for 24 h at 50°C to form urethane linkage. Fourier transform IR analysis of the clay modified with the PMDI demonstrated that the NCO characteristic peak was observed in the clay after a modification reaction with PMDI. The results of the X-ray pattern suggested that the clay layers were exfoliated from the PU/clay nanocomposite. From the results of the mechanical properties, the maximum values of the flexural and tensile strength were observed when 3 wt % clay based on PMDI was added into the PU/clay nanocomposites. The glass-transition temperature and change in the heat capacity at glass transition temperature (ΔC p) of the PU/clay nanocomposite decreased with an increase in the modified clay content. We suggested that the decrease in the ΔC p with the modified clay content might be due to the increase of steric hindrance by the exfoliated clay layers.

AB - A polyurethane (PU)/clay nanocomposite was synthesized from polyol, polymeric 4,4′-diphenyl methane diisocyanate (PMDI), and modified clay with PMDI. To achieve the modified clay with PMDI, the silanol group of the clay and the NCO group of the PMDI were reacted for 24 h at 50°C to form urethane linkage. Fourier transform IR analysis of the clay modified with the PMDI demonstrated that the NCO characteristic peak was observed in the clay after a modification reaction with PMDI. The results of the X-ray pattern suggested that the clay layers were exfoliated from the PU/clay nanocomposite. From the results of the mechanical properties, the maximum values of the flexural and tensile strength were observed when 3 wt % clay based on PMDI was added into the PU/clay nanocomposites. The glass-transition temperature and change in the heat capacity at glass transition temperature (ΔC p) of the PU/clay nanocomposite decreased with an increase in the modified clay content. We suggested that the decrease in the ΔC p with the modified clay content might be due to the increase of steric hindrance by the exfoliated clay layers.

KW - Clay

KW - Mechanical properties

KW - Nanocomposites

KW - Polyurethanes

KW - Wide-angle X-ray diffraction

UR - http://www.scopus.com/inward/record.url?scp=33747090683&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33747090683&partnerID=8YFLogxK

U2 - 10.1002/app.23357

DO - 10.1002/app.23357

M3 - Article

AN - SCOPUS:33747090683

VL - 101

SP - 2879

EP - 2883

JO - Journal of Applied Polymer Science

JF - Journal of Applied Polymer Science

SN - 0021-8995

IS - 5

ER -