Synthesis of colloidal InAs/ZnSe quantum dots and their quantum dot sensitized solar cell (QDSSC) application

S. H. Lee, C. Jung, Yongseok Jun, S. W. Kim

Research output: Contribution to journalArticle

15 Citations (Scopus)

Abstract

We report the synthesis of colloidal InAs/ZnSe core/shell quantum dots (QDs) by the hot injection method. InAs nanocrystals have a narrow band gap of 0.38 eV, a high absorption coefficient, and multiple exciton generation; hence, they are promising candidates for application in solar cells. However, poor coverage of the titania layer causes a low solar efficiency of 1.74%. We synthesized type-I InAs/ZnSe core/shell QDs as an effective solution; they are expected to have enhanced solar cell efficiency because of the different wettability of the ZnSe shell and their superior stability as compared to that of the unstable InAs core. We characterized the QDs by powder X-ray diffraction, transmission electron microscopy, and absorption and emission spectroscopy. The particle size increased from 2.6 nm to 5 nm, whereas the absorption and emission spectra exhibited a slight red shift, which is typical of type-I structured core/shell QDs. We then fabricated QD-based solar cells and investigated the cell properties, obtaining an open-circuit voltage (VOC) of 0.51 V, a short-circuit current density (JSC) of 12.4 mA/cm2, and a fill factor (FF) of 44%; the efficiency of 2.7% shows an improvement of more than 50% as compared to the values in previous reports.

Original languageEnglish
Pages (from-to)230-234
Number of pages5
JournalOptical Materials
Volume49
DOIs
Publication statusPublished - 2015 Nov 1
Externally publishedYes

Fingerprint

Semiconductor quantum dots
Solar cells
solar cells
quantum dots
synthesis
Electron absorption
volatile organic compounds
Emission spectroscopy
Open circuit voltage
short circuit currents
wettability
open circuit voltage
Volatile organic compounds
Absorption spectroscopy
Excitons
red shift
Short circuit currents
X ray powder diffraction
Nanocrystals
Wetting

Keywords

  • InAs
  • InAs/ZnSe core/shell
  • Quantum dot based solar cell
  • Wettability

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Computer Science(all)
  • Atomic and Molecular Physics, and Optics
  • Spectroscopy
  • Physical and Theoretical Chemistry
  • Organic Chemistry
  • Inorganic Chemistry
  • Electrical and Electronic Engineering

Cite this

Synthesis of colloidal InAs/ZnSe quantum dots and their quantum dot sensitized solar cell (QDSSC) application. / Lee, S. H.; Jung, C.; Jun, Yongseok; Kim, S. W.

In: Optical Materials, Vol. 49, 01.11.2015, p. 230-234.

Research output: Contribution to journalArticle

@article{e7e7eb8d68bb495eb6561c2fc6f18ade,
title = "Synthesis of colloidal InAs/ZnSe quantum dots and their quantum dot sensitized solar cell (QDSSC) application",
abstract = "We report the synthesis of colloidal InAs/ZnSe core/shell quantum dots (QDs) by the hot injection method. InAs nanocrystals have a narrow band gap of 0.38 eV, a high absorption coefficient, and multiple exciton generation; hence, they are promising candidates for application in solar cells. However, poor coverage of the titania layer causes a low solar efficiency of 1.74{\%}. We synthesized type-I InAs/ZnSe core/shell QDs as an effective solution; they are expected to have enhanced solar cell efficiency because of the different wettability of the ZnSe shell and their superior stability as compared to that of the unstable InAs core. We characterized the QDs by powder X-ray diffraction, transmission electron microscopy, and absorption and emission spectroscopy. The particle size increased from 2.6 nm to 5 nm, whereas the absorption and emission spectra exhibited a slight red shift, which is typical of type-I structured core/shell QDs. We then fabricated QD-based solar cells and investigated the cell properties, obtaining an open-circuit voltage (VOC) of 0.51 V, a short-circuit current density (JSC) of 12.4 mA/cm2, and a fill factor (FF) of 44{\%}; the efficiency of 2.7{\%} shows an improvement of more than 50{\%} as compared to the values in previous reports.",
keywords = "InAs, InAs/ZnSe core/shell, Quantum dot based solar cell, Wettability",
author = "Lee, {S. H.} and C. Jung and Yongseok Jun and Kim, {S. W.}",
year = "2015",
month = "11",
day = "1",
doi = "10.1016/j.optmat.2015.09.027",
language = "English",
volume = "49",
pages = "230--234",
journal = "Optical Materials",
issn = "0925-3467",
publisher = "Elsevier",

}

TY - JOUR

T1 - Synthesis of colloidal InAs/ZnSe quantum dots and their quantum dot sensitized solar cell (QDSSC) application

AU - Lee, S. H.

AU - Jung, C.

AU - Jun, Yongseok

AU - Kim, S. W.

PY - 2015/11/1

Y1 - 2015/11/1

N2 - We report the synthesis of colloidal InAs/ZnSe core/shell quantum dots (QDs) by the hot injection method. InAs nanocrystals have a narrow band gap of 0.38 eV, a high absorption coefficient, and multiple exciton generation; hence, they are promising candidates for application in solar cells. However, poor coverage of the titania layer causes a low solar efficiency of 1.74%. We synthesized type-I InAs/ZnSe core/shell QDs as an effective solution; they are expected to have enhanced solar cell efficiency because of the different wettability of the ZnSe shell and their superior stability as compared to that of the unstable InAs core. We characterized the QDs by powder X-ray diffraction, transmission electron microscopy, and absorption and emission spectroscopy. The particle size increased from 2.6 nm to 5 nm, whereas the absorption and emission spectra exhibited a slight red shift, which is typical of type-I structured core/shell QDs. We then fabricated QD-based solar cells and investigated the cell properties, obtaining an open-circuit voltage (VOC) of 0.51 V, a short-circuit current density (JSC) of 12.4 mA/cm2, and a fill factor (FF) of 44%; the efficiency of 2.7% shows an improvement of more than 50% as compared to the values in previous reports.

AB - We report the synthesis of colloidal InAs/ZnSe core/shell quantum dots (QDs) by the hot injection method. InAs nanocrystals have a narrow band gap of 0.38 eV, a high absorption coefficient, and multiple exciton generation; hence, they are promising candidates for application in solar cells. However, poor coverage of the titania layer causes a low solar efficiency of 1.74%. We synthesized type-I InAs/ZnSe core/shell QDs as an effective solution; they are expected to have enhanced solar cell efficiency because of the different wettability of the ZnSe shell and their superior stability as compared to that of the unstable InAs core. We characterized the QDs by powder X-ray diffraction, transmission electron microscopy, and absorption and emission spectroscopy. The particle size increased from 2.6 nm to 5 nm, whereas the absorption and emission spectra exhibited a slight red shift, which is typical of type-I structured core/shell QDs. We then fabricated QD-based solar cells and investigated the cell properties, obtaining an open-circuit voltage (VOC) of 0.51 V, a short-circuit current density (JSC) of 12.4 mA/cm2, and a fill factor (FF) of 44%; the efficiency of 2.7% shows an improvement of more than 50% as compared to the values in previous reports.

KW - InAs

KW - InAs/ZnSe core/shell

KW - Quantum dot based solar cell

KW - Wettability

UR - http://www.scopus.com/inward/record.url?scp=84944742894&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84944742894&partnerID=8YFLogxK

U2 - 10.1016/j.optmat.2015.09.027

DO - 10.1016/j.optmat.2015.09.027

M3 - Article

AN - SCOPUS:84944742894

VL - 49

SP - 230

EP - 234

JO - Optical Materials

JF - Optical Materials

SN - 0925-3467

ER -