Temperature-compensated cone penetration test mini-cone using fiber optic sensors

Raehyun Kim, Woojin Lee, Jong Sub Lee

Research output: Contribution to journalArticle

12 Citations (Scopus)

Abstract

The mechanical properties obtained by using a strain gauge are influenced by the temperature change that occurs due to the electrical resistance change of the strain gauge and cable. The temperature change, which occurs during cone penetration testing, can produce an unreliable cone tip resistance. Several types of cone penetrometers with diameters ranging from 1 to 7mmare developed by using fiber Bragg grating (FBG) sensors for the temperature compensation. The design concerns include the configuration, active and temperature sensor installation, and calibration. FBG active sensors monitor both the tip resistance and the temperature change, while the FBG temperature transducer only measures the temperature change. The experimental studies show that the tip resistance estimated by strain gauges is affected by the temperature change in both full and half Wheatstone bridges, but the tip resistance determined by the FBG sensors is independent of the temperature change. The tip resistances determined by the strain gauges and the FBG sensors are reliable after the temperature is compensated for. This study demonstrates that by using FBG sensors, cone penetrometers produce a more reliable cone tip resistance.

Original languageEnglish
JournalGeotechnical Testing Journal
Volume33
Issue number3
DOIs
Publication statusPublished - 2010 May

Keywords

  • Cone penetrometer
  • Fiber Bragg grating
  • Fiber optic sensor
  • Layer detection
  • Penetrometer scale
  • Temperature compensation

ASJC Scopus subject areas

  • Geotechnical Engineering and Engineering Geology

Fingerprint Dive into the research topics of 'Temperature-compensated cone penetration test mini-cone using fiber optic sensors'. Together they form a unique fingerprint.

  • Cite this